Sweet 'N Sassy Templatesâ¢
NON-SLIP
Sweet ‘N Sassy Templates™
SEE A DEMO SCAN WITH ANY QR READER
The CGRPA1 Sweet ‘N Sassy Templates ™ are used in several designs created by Phyllis Anderson of Silver Thimble/New Beginnings Designs. See her patterns for complete instructions.
This Rhombus Template Set includes the shapes needed to create diamonds in three sizes, as well as the sashing strips and set-in triangles to piece them together. Sew the diamonds from strip sets, then piece the trimmings together to create a miniature version. Contains the unique NON-SLIP gripper system that is featured on every Creative Grids ruler. Designed by Phyllis Anderson
Saer-Bear’s
creative grids
®
The Original NON-SLIP Ruler
#CGRPA1 Made in USA
Creative Grids® USA, Inc 400 W. Dussel Dr. Ste B Maumee, OH 43537 www.creativegridsUSA.com
Creative Grids® UK, Ltd. Unit 23A Pate Road Leicester Road Industrial Estate Melton Mowbray Leicestershire, LE13 0RG England www.creativegrids.com
Maddie Bea’s
NON-SLIP
Sweet ‘N Sassy Templates™
Each set of Sweet ‘N Sassy Templates™ consists of three different sizes of rhombus shapes. Each shape can be cut from strips and sewn together to create a design. Cutting from One Fabric: Template #1: Cut 2 ½" strips. Place Template #1 over this strip and cut around the template on all sides. Template #2: Cut 3 ½" strips. Place Template #2 over this strip and cut around the template on all sides. Template #3: Cut 5 ½" strips. Place Template #3 over this strip and cut around the template on all sides. These Rhombus Units can also be cut from pieced strips. For instance:
Press this seam open. Place the Creative Grids® #2 Rhombus Template on this pieced unit – matching the lines on the template with the seam lines.
2 CGRPA1
Designed by Phyllis Anderson
6. Trim the fabric even with the template on all sides. (Save the two end pieces. These can be sewn into a miniature version using the Creative Grids® #1 Rhombus Template.)
Piecing the Large Rhombus from Strips: 1. Cut two - 2" strips of coordinating prints the width of the fabric. (These units will be trimmed after sewing is complete so pre-cut strips or scraps that are at least 2" wide can be used.) Sew these strips together with a ¼" seam. Press the seam toward the dark fabric.
2.
Place the Creative Grids® #2 Rhombus Template on the strip set – matching the line on the template to the seam line. Rotary cut along each angled edge. Each strip set yields twelve units. The top and bottom edges will be trimmed when the units are sewn together.
2 CGRPA1
Designed by Phyllis Anderson
Piecing the Small Rhombus (from Scraps): 1. Place the Creative Grids® #2 Rhombus Template on the wrong side of each end piece. Mark the ¼" seam allowance through the hole with a water soluble marker.
2
2 nosrednA sillyhP yb dengiseD
1APRGC
nosrednA sillyhP yb dengiseD
1APRGC
2. Place two units – right sides together – reversing fabrics. Pin through the marked dots to match seams.
2 CGRPA1
Designed by Phyllis Anderson
3. Place the Creative Grids® #2 Rhombus Template on the wrong side of each unit. Mark the ¼" seam allowance through the hole with a water soluble marker.
3. Sew these units together with a ¼" seam. Press this seam open. Place the Creative Grids® #1 Rhombus Template on this pieced unit – matching the lines on the template with the seam lines.
1 CGRPA1
2 nosrednA sillyhP yb dengiseD
Designed by Phyllis Anderson
1APRGC
4. Place two units – right sides together – reversing fabrics. Pin through the marked dots to match seams.
4. Trim the fabric even with the template on all sides. These mini’s can be used to make a miniature version of the original design.
5. Sew these units together with a ¼" seam.
These templates are used in several designs created by Phyllis Anderson. See her patterns for complete instructions.
creative grids The Original NON-SLIP Ruler
Creative Grids® USA, Inc 400 W. Dussel Dr. Ste B Maumee, OH 43537 www.creativegridsUSA.com
®
Creative Grids® UK, Ltd. Unit 23A Pate Road Leicester Road Industrial Estate Melton Mowbray Leicestershire, LE13 0RG England www.creativegrids.com
Creative Grids is covered by U.S. Trademark Registration No. 2,796,615
05.28.13.1
Sweet ‘N Sassy Templates™
SEE A DEMO SCAN WITH ANY QR READER
The CGRPA1 Sweet ‘N Sassy Templates ™ are used in several designs created by Phyllis Anderson of Silver Thimble/New Beginnings Designs. See her patterns for complete instructions.
This Rhombus Template Set includes the shapes needed to create diamonds in three sizes, as well as the sashing strips and set-in triangles to piece them together. Sew the diamonds from strip sets, then piece the trimmings together to create a miniature version. Contains the unique NON-SLIP gripper system that is featured on every Creative Grids ruler. Designed by Phyllis Anderson
Saer-Bear’s
creative grids
®
The Original NON-SLIP Ruler
#CGRPA1 Made in USA
Creative Grids® USA, Inc 400 W. Dussel Dr. Ste B Maumee, OH 43537 www.creativegridsUSA.com
Creative Grids® UK, Ltd. Unit 23A Pate Road Leicester Road Industrial Estate Melton Mowbray Leicestershire, LE13 0RG England www.creativegrids.com
Maddie Bea’s
NON-SLIP
Sweet ‘N Sassy Templates™
Each set of Sweet ‘N Sassy Templates™ consists of three different sizes of rhombus shapes. Each shape can be cut from strips and sewn together to create a design. Cutting from One Fabric: Template #1: Cut 2 ½" strips. Place Template #1 over this strip and cut around the template on all sides. Template #2: Cut 3 ½" strips. Place Template #2 over this strip and cut around the template on all sides. Template #3: Cut 5 ½" strips. Place Template #3 over this strip and cut around the template on all sides. These Rhombus Units can also be cut from pieced strips. For instance:
Press this seam open. Place the Creative Grids® #2 Rhombus Template on this pieced unit – matching the lines on the template with the seam lines.
2 CGRPA1
Designed by Phyllis Anderson
6. Trim the fabric even with the template on all sides. (Save the two end pieces. These can be sewn into a miniature version using the Creative Grids® #1 Rhombus Template.)
Piecing the Large Rhombus from Strips: 1. Cut two - 2" strips of coordinating prints the width of the fabric. (These units will be trimmed after sewing is complete so pre-cut strips or scraps that are at least 2" wide can be used.) Sew these strips together with a ¼" seam. Press the seam toward the dark fabric.
2.
Place the Creative Grids® #2 Rhombus Template on the strip set – matching the line on the template to the seam line. Rotary cut along each angled edge. Each strip set yields twelve units. The top and bottom edges will be trimmed when the units are sewn together.
2 CGRPA1
Designed by Phyllis Anderson
Piecing the Small Rhombus (from Scraps): 1. Place the Creative Grids® #2 Rhombus Template on the wrong side of each end piece. Mark the ¼" seam allowance through the hole with a water soluble marker.
2
2 nosrednA sillyhP yb dengiseD
1APRGC
nosrednA sillyhP yb dengiseD
1APRGC
2. Place two units – right sides together – reversing fabrics. Pin through the marked dots to match seams.
2 CGRPA1
Designed by Phyllis Anderson
3. Place the Creative Grids® #2 Rhombus Template on the wrong side of each unit. Mark the ¼" seam allowance through the hole with a water soluble marker.
3. Sew these units together with a ¼" seam. Press this seam open. Place the Creative Grids® #1 Rhombus Template on this pieced unit – matching the lines on the template with the seam lines.
1 CGRPA1
2 nosrednA sillyhP yb dengiseD
Designed by Phyllis Anderson
1APRGC
4. Place two units – right sides together – reversing fabrics. Pin through the marked dots to match seams.
4. Trim the fabric even with the template on all sides. These mini’s can be used to make a miniature version of the original design.
5. Sew these units together with a ¼" seam.
These templates are used in several designs created by Phyllis Anderson. See her patterns for complete instructions.
creative grids The Original NON-SLIP Ruler
Creative Grids® USA, Inc 400 W. Dussel Dr. Ste B Maumee, OH 43537 www.creativegridsUSA.com
®
Creative Grids® UK, Ltd. Unit 23A Pate Road Leicester Road Industrial Estate Melton Mowbray Leicestershire, LE13 0RG England www.creativegrids.com
Creative Grids is covered by U.S. Trademark Registration No. 2,796,615
05.28.13.1
