Technical Data Sheet - Electrocomponents
Technical Data Sheet STRAIGHT PUSH PULL PLUG SOLDER TYPE FOR CABLE .141
PAGE 1/3
ISSUE 24-06-15A
SERIES 4.3-10
PART NUMBER R183052007
All dimensions are in mm. . pn
. ao
COMPONENTS Body Center contact Outer contact Insulator Gasket Others parts -
MATERIALS
PLATING (m)
BRASS BRASS
BBR SILVER
PTFE EPDM BRASS -
BBR -
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PUSH PULL PLUG SOLDER TYPE FOR CABLE .141
PAGE 2/3
ISSUE 24-06-15A
SERIES 4.3-10
PART NUMBER R183052007
PACKAGING Standard 50
Unit Contact us
Other Contact us
ELECTRICAL CHARACTERISTICS Impedance Frequency 1.02 + VSWR Insertion loss RF leakage -( Voltage rating Dielectric withstanding voltage Insulation resistance
50 0-6 0.0100 0.05 NA 335 1000 5000
ENVIRONMENTAL
GHz x F(GHz) Maxi F(GHz) dB Maxi - F(GHz)) dB Maxi Veff Maxi Veff mini M mini
NA NA NA
°C Atm.cm3/s
SPECIFICATION
MECHANICAL CHARACTERISTICS Center contact retention Axial force – Mating End Axial force – Opposite end Torque
-55/+90 NA NA
Operating temperature Hermetic seal Panel leakage
CABLE ASSEMBLY N mini N mini N.cm mini
Stripping mm
a 4.8
b 0
c 0
d 0
e 0
f 0
Assembly instruction: Solder 02 Recommended torque Mating Panel nut Clamp nut A/F clamp nut Mating life Weight
NA NA NA 0.0000 100 28.6260
N.cm N.cm N.cm mm
Cycles mini g
Recommended cable(s) RG 402 KS 2 BELDEN 1673A HC80000-3 SUCOFORM 141 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly
Cable retention - pull off - torque
200 NA
N mini N.cm
TOOLING Part Number R282744325
Description
Hexagon
SOLDERING POSITIONER
OTHER CHARACTERISTICS IP67 mated condition
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PUSH PULL PLUG SOLDER TYPE FOR CABLE .141
PAGE 3/3
ISSUE 24-06-15A
SERIES 4.3-10
PART NUMBER R183052007
———————————————————————————————————————— 1 Strip the dielectric of the cable. Clean the cable.
2
3 Screw the positioner onto the soldering jig. Slide the cable assembly until it bottoms against positioner. Tighten and solder the contact.
4
Slide the insulator and the center contact onto the cable inner conductor
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
PAGE 1/3
ISSUE 24-06-15A
SERIES 4.3-10
PART NUMBER R183052007
All dimensions are in mm. . pn
. ao
COMPONENTS Body Center contact Outer contact Insulator Gasket Others parts -
MATERIALS
PLATING (m)
BRASS BRASS
BBR SILVER
PTFE EPDM BRASS -
BBR -
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PUSH PULL PLUG SOLDER TYPE FOR CABLE .141
PAGE 2/3
ISSUE 24-06-15A
SERIES 4.3-10
PART NUMBER R183052007
PACKAGING Standard 50
Unit Contact us
Other Contact us
ELECTRICAL CHARACTERISTICS Impedance Frequency 1.02 + VSWR Insertion loss RF leakage -( Voltage rating Dielectric withstanding voltage Insulation resistance
50 0-6 0.0100 0.05 NA 335 1000 5000
ENVIRONMENTAL
GHz x F(GHz) Maxi F(GHz) dB Maxi - F(GHz)) dB Maxi Veff Maxi Veff mini M mini
NA NA NA
°C Atm.cm3/s
SPECIFICATION
MECHANICAL CHARACTERISTICS Center contact retention Axial force – Mating End Axial force – Opposite end Torque
-55/+90 NA NA
Operating temperature Hermetic seal Panel leakage
CABLE ASSEMBLY N mini N mini N.cm mini
Stripping mm
a 4.8
b 0
c 0
d 0
e 0
f 0
Assembly instruction: Solder 02 Recommended torque Mating Panel nut Clamp nut A/F clamp nut Mating life Weight
NA NA NA 0.0000 100 28.6260
N.cm N.cm N.cm mm
Cycles mini g
Recommended cable(s) RG 402 KS 2 BELDEN 1673A HC80000-3 SUCOFORM 141 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly
Cable retention - pull off - torque
200 NA
N mini N.cm
TOOLING Part Number R282744325
Description
Hexagon
SOLDERING POSITIONER
OTHER CHARACTERISTICS IP67 mated condition
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PUSH PULL PLUG SOLDER TYPE FOR CABLE .141
PAGE 3/3
ISSUE 24-06-15A
SERIES 4.3-10
PART NUMBER R183052007
———————————————————————————————————————— 1 Strip the dielectric of the cable. Clean the cable.
2
3 Screw the positioner onto the soldering jig. Slide the cable assembly until it bottoms against positioner. Tighten and solder the contact.
4
Slide the insulator and the center contact onto the cable inner conductor
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
