TomTom ONE Speaker Replacement
TomTom ONE Speaker Replacement
TomTom ONE Speaker Replacement Written By: Becca
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
TomTom ONE Speaker Replacement
INTRODUCTION If your speakers have stopped working, this is the guide for you! It will show you how to replace your speaker with a new one.
TOOLS: Spudger (1) T7 Torx Screwdriver (1) T9 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
TomTom ONE Speaker Replacement
Step 1 — Speaker
Use a T-9 Torx screwdriver to unscrew the four screws on the back cover.
Step 2
Using the spudger, gently pry apart the back case from the front case. It is easier to start on a side and work your way around the device.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
TomTom ONE Speaker Replacement
Step 3
Carefully pull the back cover apart from the front cover. Be careful not to pull too hard because there are two sets of wires connecting the device.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the two covers are separated, use the tweezers, or even your fingers, to gently disconnect the two sets of wires that are connected to the motherboard from the back cover. You may have to wiggle the wires a little bit to get them to disconnect.
Page 4 of 5
TomTom ONE Speaker Replacement
Step 5
Take the spudger and pry out the speaker.
When taking out the speaker, the entire plastic shock mounting casing will come out. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-29 11:17:31 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
TomTom ONE Speaker Replacement Written By: Becca
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
TomTom ONE Speaker Replacement
INTRODUCTION If your speakers have stopped working, this is the guide for you! It will show you how to replace your speaker with a new one.
TOOLS: Spudger (1) T7 Torx Screwdriver (1) T9 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
TomTom ONE Speaker Replacement
Step 1 — Speaker
Use a T-9 Torx screwdriver to unscrew the four screws on the back cover.
Step 2
Using the spudger, gently pry apart the back case from the front case. It is easier to start on a side and work your way around the device.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
TomTom ONE Speaker Replacement
Step 3
Carefully pull the back cover apart from the front cover. Be careful not to pull too hard because there are two sets of wires connecting the device.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the two covers are separated, use the tweezers, or even your fingers, to gently disconnect the two sets of wires that are connected to the motherboard from the back cover. You may have to wiggle the wires a little bit to get them to disconnect.
Page 4 of 5
TomTom ONE Speaker Replacement
Step 5
Take the spudger and pry out the speaker.
When taking out the speaker, the entire plastic shock mounting casing will come out. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-29 11:17:31 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
