Troy-Bilt TB675 EC Air Filter Replacement
Troy-Bilt TB675 EC Air Filter Replacement
Troy-Bilt TB675 EC Air Filter Replacement The air filter traps dirt from entering the engine of the string trimmer. It must be cleaned/replaced to ensure the engine runs properly.
Written By: Brian Hall
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Troy-Bilt TB675 EC Air Filter Replacement
INTRODUCTION This guide outlines how to properly remove the air filter on a Troy-Bilt TB675 EC. The guide also explains how to clean the air filter.
TOOLS: Compressed Air (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Troy-Bilt TB675 EC Air Filter Replacement
Step 1 — Air Filter
Remove the air filter housing by turning the plastic screw counterclockwise with your hand.
Step 2 — Remove the air filter that lays beneath the housing you removed in step 1
Remove the air filter that lays beneath the housing you removed in step 1.
It is good practice to inspect your air filter for tears or other defects. If defects are found it is best to replace the air filter rather than to clean it.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Troy-Bilt TB675 EC Air Filter Replacement
Step 3
Clean the air filter thoroughly by spraying compressed air through the filter.
Be sure to spray the compressed air away from you in order to prevent injury.
Step 4
Wipe all oil and water residue around the air filter casing with a paper towel or rag.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Troy-Bilt TB675 EC Air Filter Replacement
Step 5
Place the air filter and air filter casing back in its original position.
Be sure the air filter and housing are lined up correctly.
Step 6
Complete the maintenance by turning the screw clockwise with your hand until it is fully secured.
This document was last generated on 2017-06-26 11:19:50 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Troy-Bilt TB675 EC Air Filter Replacement The air filter traps dirt from entering the engine of the string trimmer. It must be cleaned/replaced to ensure the engine runs properly.
Written By: Brian Hall
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Troy-Bilt TB675 EC Air Filter Replacement
INTRODUCTION This guide outlines how to properly remove the air filter on a Troy-Bilt TB675 EC. The guide also explains how to clean the air filter.
TOOLS: Compressed Air (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Troy-Bilt TB675 EC Air Filter Replacement
Step 1 — Air Filter
Remove the air filter housing by turning the plastic screw counterclockwise with your hand.
Step 2 — Remove the air filter that lays beneath the housing you removed in step 1
Remove the air filter that lays beneath the housing you removed in step 1.
It is good practice to inspect your air filter for tears or other defects. If defects are found it is best to replace the air filter rather than to clean it.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Troy-Bilt TB675 EC Air Filter Replacement
Step 3
Clean the air filter thoroughly by spraying compressed air through the filter.
Be sure to spray the compressed air away from you in order to prevent injury.
Step 4
Wipe all oil and water residue around the air filter casing with a paper towel or rag.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Troy-Bilt TB675 EC Air Filter Replacement
Step 5
Place the air filter and air filter casing back in its original position.
Be sure the air filter and housing are lined up correctly.
Step 6
Complete the maintenance by turning the screw clockwise with your hand until it is fully secured.
This document was last generated on 2017-06-26 11:19:50 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
