Turtle Beach Ear Force XO Four Microphone Replacement
Turtle Beach Ear Force XO Four Microphone Replacement
Turtle Beach Ear Force XO Four Microphone Replacement Replace a damaged or faulty microphone on the Turtle Beach Ear Force XO Four headset.
Written By: Cody Barrett
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Turtle Beach Ear Force XO Four Microphone Replacement
INTRODUCTION This guide will exhibit how to replace the microphone board. Soldering is required to detach and replace the board, so refer to the soldering replacement guide for more information.
TOOLS: Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Turtle Beach Ear Force XO Four Microphone Replacement
Step 1 — Microphone
Gently remove the foam pad from the microphone by pulling it apart.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove the PH0 7.1 mm screw from the back casing.
Page 3 of 4
Turtle Beach Ear Force XO Four Microphone Replacement
Step 3
Remove the back casing from the microphone.
Desolder the two wires from the back of the microphone. For instructions on soldering, please see iFixit's soldering guide.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 07:21:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Turtle Beach Ear Force XO Four Microphone Replacement Replace a damaged or faulty microphone on the Turtle Beach Ear Force XO Four headset.
Written By: Cody Barrett
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Turtle Beach Ear Force XO Four Microphone Replacement
INTRODUCTION This guide will exhibit how to replace the microphone board. Soldering is required to detach and replace the board, so refer to the soldering replacement guide for more information.
TOOLS: Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Turtle Beach Ear Force XO Four Microphone Replacement
Step 1 — Microphone
Gently remove the foam pad from the microphone by pulling it apart.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove the PH0 7.1 mm screw from the back casing.
Page 3 of 4
Turtle Beach Ear Force XO Four Microphone Replacement
Step 3
Remove the back casing from the microphone.
Desolder the two wires from the back of the microphone. For instructions on soldering, please see iFixit's soldering guide.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 07:21:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
