Turtle Beach Ear Force XO Seven Ear Pad Replacement
Turtle Beach Ear Force XO Seven Ear Pad Replacement
Turtle Beach Ear Force XO Seven Ear Pad Replacement In 2 steps, this guide will show you how to remove Ear Pads.
Written By: Andrew Rudnick
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Turtle Beach Ear Force XO Seven Ear Pad Replacement
INTRODUCTION The ear pads or cushions on the headset are designed to give users a comfortable feel while they wear the set on their head. Also, the pads are shaped to enclose and cover the entire ear for optimal sound quality. After many uses however, these pads can crack or tear. When that happens, this guide will show you how to replace them.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Turtle Beach Ear Force XO Seven Ear Pad Replacement
Step 1 — Ear Pad
Place your thumb on the edge of the plastic lip, facing away from the ear pad.
Press the edge of the material down and peel it backwards towards the ear pad.
Step 2
Apply the same instructions to remove the other foam pad off of the headset.
Make sure you continue to gently peel the ear pad from the headset until completely removed. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 04:38:35 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
Turtle Beach Ear Force XO Seven Ear Pad Replacement In 2 steps, this guide will show you how to remove Ear Pads.
Written By: Andrew Rudnick
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Turtle Beach Ear Force XO Seven Ear Pad Replacement
INTRODUCTION The ear pads or cushions on the headset are designed to give users a comfortable feel while they wear the set on their head. Also, the pads are shaped to enclose and cover the entire ear for optimal sound quality. After many uses however, these pads can crack or tear. When that happens, this guide will show you how to replace them.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Turtle Beach Ear Force XO Seven Ear Pad Replacement
Step 1 — Ear Pad
Place your thumb on the edge of the plastic lip, facing away from the ear pad.
Press the edge of the material down and peel it backwards towards the ear pad.
Step 2
Apply the same instructions to remove the other foam pad off of the headset.
Make sure you continue to gently peel the ear pad from the headset until completely removed. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 04:38:35 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
