TX6 PLUS and TX5e UTP Jack Modules
TX6 PLUS and TX5e UTP Jack Modules Part Numbers: CJ688TG**, CJD688TG**, CJK688TG**, CJE688TG**, CJQ688TG**, CJ5E88TG**, CJD5E88TG**, CJK5E88TG**, CJE5E88TG**
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
PN403L
Strain Relief Collar
CJD688TG**
CJ688TG**
Wire Cap
Jack CJD5E88TG**
CJ5E88TG**
TERMINATION STEPS 2
1
3 0.5"
2.0" (50.8mm)
(12.7mm)
CWST
Trim pair separator and/or ripcord if present.
4
5
Cable End 2
Cable End 1
6
2
1
7
Cable End 1
Pr1
Pr4
8
Cable End 2 Pr2
EGJT
Pr3 Pr3
Pr4
Pr2
Pr1
Note: For bulk packaged TG Style Jack Modules add -24 to end of part number. ** Denotes color.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
PN403L
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
9
10
CWST
T568B
T568A Cable End 1
Cable End 1 1
2
2 1
3
Cable End 2
11
12
Cable End 2
2
EGJT
2
1
1 3
3
13
See note 4.
REMOVAL STEPS 2
1
3
Notes: 1. For specified performance, follow ANSI/NECA/BICSI-568-2006 installation guidelines. 2. Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062 (1.57 mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 20 times. 4. On cable end 2 for A & B wiring and cable end 1 of A wiring, wrap the designated pairs around the proper center dividing post (A or B) and terminate in the proper location. 5. For technical and performance information, consult Panduit Technical Support. As 1. 2. 3. 4.
with all Communication Components, the following statements apply: Never install communications wiring during a lightning storm. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: http://www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Phone: 866-405-6654
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
PN403L
Strain Relief Collar
CJD688TG**
CJ688TG**
Wire Cap
Jack CJD5E88TG**
CJ5E88TG**
TERMINATION STEPS 2
1
3 0.5"
2.0" (50.8mm)
(12.7mm)
CWST
Trim pair separator and/or ripcord if present.
4
5
Cable End 2
Cable End 1
6
2
1
7
Cable End 1
Pr1
Pr4
8
Cable End 2 Pr2
EGJT
Pr3 Pr3
Pr4
Pr2
Pr1
Note: For bulk packaged TG Style Jack Modules add -24 to end of part number. ** Denotes color.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
PN403L
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
9
10
CWST
T568B
T568A Cable End 1
Cable End 1 1
2
2 1
3
Cable End 2
11
12
Cable End 2
2
EGJT
2
1
1 3
3
13
See note 4.
REMOVAL STEPS 2
1
3
Notes: 1. For specified performance, follow ANSI/NECA/BICSI-568-2006 installation guidelines. 2. Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062 (1.57 mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 20 times. 4. On cable end 2 for A & B wiring and cable end 1 of A wiring, wrap the designated pairs around the proper center dividing post (A or B) and terminate in the proper location. 5. For technical and performance information, consult Panduit Technical Support. As 1. 2. 3. 4.
with all Communication Components, the following statements apply: Never install communications wiring during a lightning storm. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: http://www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Phone: 866-405-6654
