TX6A 10Gig UTP Jack Modules - STSI
TX6A 10Gig UTP Jack Modules For use with TX6 10Gig Cable (If using TX6A 10Gig Cable with MaTriX Technology, reference PN511*) Part Numbers: CJ6X88TG**, CJD6X88TG**, CJK6X88TG**, CJQ6X88TG**
PN364L
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010
Strain Relief Collar Wire Cap
CJ6X88TG**
Jack
CJD6X88TG**
TERMINATION STEPS
4
7
3
2
1
5
Cable End 2
Cable End 1
Cable End 1
8
Cable End 2
EGJT
Pr3
Pr2 Pr1
6
Pr3
Pr4
Pr2
Pr1
Pr4
* Denotes Instruction Sheet revision letter.
** Denotes color.
Note: For bulk packaged TG Style Jack Modules add -24 to end of part number.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010
9
PN364L 10
CWST
T568B
T568A Cable End 1
Cable End 1 1
2
2 1 3
11
12
Cable End 2
Cable End 2
2
EGJT
2 1
1 3
3
13
See note 4.
REMOVAL STEPS 2
1
3
Notes: 1. For specified performance, follow TIA/EIA 568-C installation guidelines. 2. Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062 inch (1.57 mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 10 times. 4. On cable end 2 for A & B wiring and cable end 1 of A wiring, wrap the designated pairs around the proper center dividing post (A or B) and terminate in the proper location. 5. For technical and performance information, consult Panduit Technical Support. As 1. 2. 3. 4.
with all Communication Components, the following statements apply: Never install communications wiring during a lightning storm. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: http://www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Fax: (708) 444-6993
PN364L
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010
Strain Relief Collar Wire Cap
CJ6X88TG**
Jack
CJD6X88TG**
TERMINATION STEPS
4
7
3
2
1
5
Cable End 2
Cable End 1
Cable End 1
8
Cable End 2
EGJT
Pr3
Pr2 Pr1
6
Pr3
Pr4
Pr2
Pr1
Pr4
* Denotes Instruction Sheet revision letter.
** Denotes color.
Note: For bulk packaged TG Style Jack Modules add -24 to end of part number.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010
9
PN364L 10
CWST
T568B
T568A Cable End 1
Cable End 1 1
2
2 1 3
11
12
Cable End 2
Cable End 2
2
EGJT
2 1
1 3
3
13
See note 4.
REMOVAL STEPS 2
1
3
Notes: 1. For specified performance, follow TIA/EIA 568-C installation guidelines. 2. Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062 inch (1.57 mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 10 times. 4. On cable end 2 for A & B wiring and cable end 1 of A wiring, wrap the designated pairs around the proper center dividing post (A or B) and terminate in the proper location. 5. For technical and performance information, consult Panduit Technical Support. As 1. 2. 3. 4.
with all Communication Components, the following statements apply: Never install communications wiring during a lightning storm. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: http://www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Fax: (708) 444-6993
