universal ground bar system - Panduit
UNIVERSAL GROUND BAR SYSTEM UGB2/0-414-6, UGB2/0-414-12, UGB2/0-414-18, UGB-IN-SO, UGB-B-SO, CLMAR2/0-14-Q INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
T-PMPI-301-PC
MOUNTING UNIVERSAL GROUND BAR MOUNT USING ISOLATION STAND-OFF UGB-IN-SO
MOUNT USING BONDING STAND-0FF UGB-B-SO
MOUNT DIRECTLY TO PANEL #10-32 FLAT HEAD SCREW 36 lbf-in [4 N.m]
#10-32 MOUNTING SCREW 36 lbf-in [4 N.m]
#10-32 MOUNTING SCREW 36 lbf-in [4 N.m]
DRILL 11/64 [4.4mm] HOLE
DRILL 11/64 [4.4mm] HOLE
DRILL 11/64 [4.4mm] HOLE
* ATTACHING “MAIN” EQUIPMENT GROUNDING CONDUCTOR TO UGB USING ANTI-ROTATIONAL CONNECTOR** CLMAR2/0-14-Q
USING 2 HOLE COPPER COMPRESSION CONNECTOR**, ***
1/4-28 MOUNTING SCREWS 36 lbf-in [4 N.m]
USING 1 HOLE COPPER COMPRESSION CONNECTOR**
1/4-28 MOUNTING SCREWS 36 lbf-in [4 N.m]
CLMAR2/0-14-Q
*** SEE NOTE
* “MAIN” EQUIPMENT GROUNDING CONDUCTOR MAXIMUM OF 2/0 AWG COPPER CONDUCTOR ** SEE PAGE 2 FOR CONNECTOR OPTIONS *** WIRE PORT CANNOT BE USED WHEN CONNECTOR IS MOUNTED ABOVE WIRE PORT For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
1/4-28 MOUNTING SCREWS 36 lbf-in [4 N.m]
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
T-PMPI-301-PC
ATTACHING WIRES TO “PORT” CONNECTIONS* * EQUIPMENT GROUNDING CONDUCTOR MAXIMUM #4 AWG COPPER
BARE COPPER WIRE FROM #14 AWG TO #4 AWG RING TERMINALS WITH 1/4” STUD HOLE & MAX. TONGUE WIDTH OF .55” [14.0]
COMPRESSION CONNECTORS WITH 1/4” STUD HOLE & MAX. TONGUE WIDTH OF .55” [14.0] FERRULES FROM #14 AWG TO #6 AWG
AFFIX INCLUDED GROUNDING STICKER IN CLOSE PROXIMITY TO GROUND BAR
CONNECTOR OPTIONS FOR BOTH CODE AND FLEX WIRE 2 HOLE COPPER COMPRESSION CONNECTORS**, 1/4” STUD HOLE WITH 5/8” SPACING: PANDUIT PART SERIES: LCD, LCC, LCC-W, LCDX, LCCF, LCCX 1 HOLE COPPER COMPRESSION CONNECTORS**, 1/4” STUD HOLE: PANDUIT PART SERIES: LCAS, LCA, LCB, LCB-W, LCAX, LCAF, LCBX PANDUIT ANTI-ROTATIONAL COPPER MECHANICAL CONNECTOR: PART # CLMAR2/0-14-Q (#14 AWG-2/0 AWG)
TIGHTENING TORQUE: IN-LBS [N.m] ATTACHMENT METHOD CONDUCTOR SIZE
BARE WIRE / TERMINAL / LUG / FERRULE
14 AWG - 10 AWG
35 [4.0]
8 AWG
40 [4.5]
6 AWG - 4 AWG
50 [5.6]
TERMINALS - RING PART SERIES: PN-R, PN-RX, PNF-R, PV-R, PV-RX, PK-R, PH-R, PN-HDR, PV-HDR, PV-R, PV-RX, P-R, S-R, PMNF-R, PMV-R FERRULES TYPE: FSD, F (12mm PIN LENGTH RECOMMENDED) ** 2 HOLE AND 1 HOLE COPPER COMPRESSION CONNECTORS AVAILABLE WITH SHORT, STANDARD, AND LONG BARREL LENGTHS. BENT TONGUE AND NARROW TONGUE OPTIONS ARE ALSO AVAILABLE.
E-mail: [email protected]
For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Fax: (708) 444-6993
REV 00
© Panduit Corp. 2011
T-PMPI-301-PC
MOUNTING UNIVERSAL GROUND BAR MOUNT USING ISOLATION STAND-OFF UGB-IN-SO
MOUNT USING BONDING STAND-0FF UGB-B-SO
MOUNT DIRECTLY TO PANEL #10-32 FLAT HEAD SCREW 36 lbf-in [4 N.m]
#10-32 MOUNTING SCREW 36 lbf-in [4 N.m]
#10-32 MOUNTING SCREW 36 lbf-in [4 N.m]
DRILL 11/64 [4.4mm] HOLE
DRILL 11/64 [4.4mm] HOLE
DRILL 11/64 [4.4mm] HOLE
* ATTACHING “MAIN” EQUIPMENT GROUNDING CONDUCTOR TO UGB USING ANTI-ROTATIONAL CONNECTOR** CLMAR2/0-14-Q
USING 2 HOLE COPPER COMPRESSION CONNECTOR**, ***
1/4-28 MOUNTING SCREWS 36 lbf-in [4 N.m]
USING 1 HOLE COPPER COMPRESSION CONNECTOR**
1/4-28 MOUNTING SCREWS 36 lbf-in [4 N.m]
CLMAR2/0-14-Q
*** SEE NOTE
* “MAIN” EQUIPMENT GROUNDING CONDUCTOR MAXIMUM OF 2/0 AWG COPPER CONDUCTOR ** SEE PAGE 2 FOR CONNECTOR OPTIONS *** WIRE PORT CANNOT BE USED WHEN CONNECTOR IS MOUNTED ABOVE WIRE PORT For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
1/4-28 MOUNTING SCREWS 36 lbf-in [4 N.m]
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
T-PMPI-301-PC
ATTACHING WIRES TO “PORT” CONNECTIONS* * EQUIPMENT GROUNDING CONDUCTOR MAXIMUM #4 AWG COPPER
BARE COPPER WIRE FROM #14 AWG TO #4 AWG RING TERMINALS WITH 1/4” STUD HOLE & MAX. TONGUE WIDTH OF .55” [14.0]
COMPRESSION CONNECTORS WITH 1/4” STUD HOLE & MAX. TONGUE WIDTH OF .55” [14.0] FERRULES FROM #14 AWG TO #6 AWG
AFFIX INCLUDED GROUNDING STICKER IN CLOSE PROXIMITY TO GROUND BAR
CONNECTOR OPTIONS FOR BOTH CODE AND FLEX WIRE 2 HOLE COPPER COMPRESSION CONNECTORS**, 1/4” STUD HOLE WITH 5/8” SPACING: PANDUIT PART SERIES: LCD, LCC, LCC-W, LCDX, LCCF, LCCX 1 HOLE COPPER COMPRESSION CONNECTORS**, 1/4” STUD HOLE: PANDUIT PART SERIES: LCAS, LCA, LCB, LCB-W, LCAX, LCAF, LCBX PANDUIT ANTI-ROTATIONAL COPPER MECHANICAL CONNECTOR: PART # CLMAR2/0-14-Q (#14 AWG-2/0 AWG)
TIGHTENING TORQUE: IN-LBS [N.m] ATTACHMENT METHOD CONDUCTOR SIZE
BARE WIRE / TERMINAL / LUG / FERRULE
14 AWG - 10 AWG
35 [4.0]
8 AWG
40 [4.5]
6 AWG - 4 AWG
50 [5.6]
TERMINALS - RING PART SERIES: PN-R, PN-RX, PNF-R, PV-R, PV-RX, PK-R, PH-R, PN-HDR, PV-HDR, PV-R, PV-RX, P-R, S-R, PMNF-R, PMV-R FERRULES TYPE: FSD, F (12mm PIN LENGTH RECOMMENDED) ** 2 HOLE AND 1 HOLE COPPER COMPRESSION CONNECTORS AVAILABLE WITH SHORT, STANDARD, AND LONG BARREL LENGTHS. BENT TONGUE AND NARROW TONGUE OPTIONS ARE ALSO AVAILABLE.
E-mail: [email protected]
For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Fax: (708) 444-6993
REV 00
