START! STEP 1 Open top of box and remove the wine bag.
STEP 2 Use a ruler to mark lines on all four sides of the box, 5 inches from the bottom.
STEP 3 Carefully use your scissors or craft knife to cut along the line you drew.
DESIGN TIP! A craft knife will give you a much cleaner and smoother edge.
STEP 4 Near the top of the cut edge, use a hole punch to make two centered holes a quarter inch apart. Repeat on the opposite side of the box. You will end up with a total of four holes, two on each side.
STEP 5 Use scissors to cut a length of ribbon 30 inches long.
STEP 6 Loop the ribbon through the four holes, making sure the ends meet up together next to each other.