Adams Rite

2016 PRICE LIST

Adams Rite

Architectural Hardware

Prices effective February 1, 2016

adamsrite.com

LIMITED WARRANTY

Limited Warranty Products sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Adams Rite products or parts. This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification. Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below.

• All mechanical products for five (5) years from date of manufacture • Ultraline 7400 Electric Strikes for five (5) years from date of manufacture • All electrical products for three (3) years from date of manufacture, with the exception of the exit devices with the SE option • Exit devices with the SE option for one (1) year from date of manufacture. Adams Rite recommends that for optimal performance all exit devices with the SE option are installed and powered using PS-SE power supplies. Installing SE exit devices with PS-SE power supplies extends the warranty to five (5) years from date of manufacture.

General RMA Procedure Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, Adams Rite will determine whether products qualify for repair or replacement under this warranty. Adams Rite has no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done. Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, 10027 S. 51st Street, Suite 102, Phoenix, Arizona 85044 or [email protected] and should include your name and address, an identification of the product or component part and a brief description of the defect. Notice of a product or component part believed to be defective as covered by this warranty may also be accepted over the telephone by Adams Rite, 800.872.3267. Upon receipt of such notice, if the customer has an account with Adams Rite or a valid credit card, an advance replacement product may be ordered whereby Adams Rite will ship a replacement product to the customer free of charge. If Adams Rite does not receive the original defective product from the customer within 60 days, Adams Rite will charge the customer’s account or credit card for the price of the advanced replacement product plus freight costs. Upon inspection of the returned product by Adams Rite, a decision will be made whether or not to charge the customer for the advanced replacement Adams Rite product. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Obsolete products will not be accepted for return. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance.

3

defective material, the customer must reference the valid Adams Rite Purchase Order number upon which the product was originally ordered. If the original Purchase Order number is not available, at Adams Rite’s option a credit may be issued at the customer’s current cost. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Transportation charges and insurance on all returned materials must be prepaid by the purchaser when merchandise is ordered in error. On goods returned for customer convenience, when the purchaser returns materials in compliance with these Terms which are accepted by Adams Rite, the purchaser may be issued a credit for 65% of the purchase price, with 35% charged by Adams Rite for handling and reprocessing. All refunds will be in the form of a credit. Scrap in field may be allowed on select products for customers who have prior agreement with Adams Rite. In this case the original defective product will not have to be returned to Adams Rite. Items allowed under this program are subject to the discretion of Adams Rite and may change at any time. Only authorized product is allowed to be scrapped in the field. Unauthorized product scrapped in the field will be considered ‘not returned’ and the customer will be charged for the replacement or credit will be denied.

Cancellation As an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. Adams Rite’s proud history of customer service and manufacturing agility allow quick response times to customer’s changing needs, which may include special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer’s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite’s option, product modifications and other special orders cannot be changed, cancelled, or returned once a ship date has been provided on an order acknowledgement by Adams Rite. Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

If Adams Rite receives original defective product from the customer within 60 days of RMA issuance, and if the customer is requesting credit for the

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

TABLE OF CONTENTS

4

General Information Adams Rite Limited Warranty/Terms and Conditions���������������������� 3 Table of Contents�������������������������������������������������4-5

EXIT DEVICES 8099 Dummy Pushbar��������������������������������������������� 19 3100, 8100 Surface Vertical Rod Exit Device��������������������������� 19 8200 Narrow Stile Surface Vertical Rod Exit Device��������������������� 20

Products

3300, 8300 Mortise Exit Device�������������������������������������� 20

DEADLOCKS

8400 Narrow Stile Mortise Exit Device�������������������������������� 21 3600, 8500 Metal Door Concealed Vertical Rod Exit Device��������������� 22

RT1050D RITE Touch ®Digital Glass Door Lock �������������������������� 6

8600 Narrow Stile Concealed Vertical Rod Exit Device������������������� 22

1830 Bottom Rail Deadlock(Swingbolt)��������������������������������� 6

3700, 8700 Rim Exit Device����������������������������������������� 23

MS1837 Series MS ® Two-Point Deadlock������������������������������� 6

8800 Narrow Stile Rim Exit Device����������������������������������� 23

MS1847 Series MS ® Deadlock���������������������������������������� 7

3900, 8900 Wood Door Concealed Vertical Rod Exit Device��������������� 24

MS1850S Series MS ® Deadlock�������������������������������������� 7

ACCESSORIES FOR EXIT DEVICES �������������������������������� 24

MS1850SN Series MS ® Deadlock (ANSI Size)��������������������������� 8

KITTED OPTIONS FOR EXIT DEVICES ������������������������������ 25

MS1861 Series MS ® Bottom Rail Deadlock������������������������������ 8

MODIFICATION OPTIONS FOR EXIT DEVICES ����������������������� 25

1875 Two-Point Deadlock������������������������������������������� 8 MS+1890 Series MS ® Deadlock/Deadlacth������������������������������ 9 MS1950 Series MS ® Deadlock���������������������������������������� 9 2190 Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors�� 10 2290 Dual Force ® Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors��������������������������������������������� 11

ELECTRIC STRIKES 7100, 7101 Electric Strikes ����������������������������������������� 25 7110, 7111 Electric Strikes ����������������������������������������� 26

2331 Heavy Duty Deadbolt����������������������������������������� 11

7130, 7131 Electric Strikes ����������������������������������������� 26

4070 Series Short Throw Deadbolt (Projection Style)��������������������� 12

7140 Electric Strike ����������������������������������������������� 27

4189, 4190 Flush Locksets (Including Deadlock)������������������������ 12

7160 Electric Strike ����������������������������������������������� 27

4430, 4431 Flush Locksets (Including Deadlock)������������������������ 13

7170 Electric Strike ����������������������������������������������� 27

5017 Wood Door Deadbolt������������������������������������������ 13

7100 Series Electric Strikes Components ����������������������������� 28

5055 Wood Door Deadlock for Sliding Doors��������������������������� 13

7240 Fire-Rated Electric Strike ������������������������������������� 29 7270 Fire-Rated Electric Strike ������������������������������������� 29 Ultraline 7400, 7401 Electric Strikes ��������������������������������� 30 Ultraline 7410, 7411 Electric Strikes ���������������������������������� 30

DEADLATCHES 4300 Electrified Deadlatch (eLatch) – Steel Hawk����������������������� 14 4300 RITE Pack�������������������������������������������������� 14 4510 Standard Duty Deadlatch�������������������������������������� 15 4530 Standard Duty Deadlatch�������������������������������������� 15 4781 Two-Point Deadlatch with Paddle�������������������������������� 16 4900 Heavy Duty Deadlatch���������������������������������������� 16 4920AN Heavy Duty Deadlatch (ANSI Size)���������������������������� 16

FLUSHBOLTS & PIVOTS 1870 Cylinder-Operated Flushbolt������������������������������������ 17 1870HM Cylinder-Operated Flushbolt��������������������������������� 17 1877 Cylinder-Operated Flushbolt������������������������������������ 17 MS1880, MS1881 Two-Point Flushbolts������������������������������� 18 MS2180 Auto-Release Two-Point Flushbolt���������������������������� 18 B1921, B1923 Reinforcing Pivots������������������������������������� 18

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

Ultraline 7430, 7431 Electric Strikes ��������������������������������� 31 Ultraline 7440 Electric Strikes �������������������������������������� 31 Ultraline 74R1 Electric Strikes �������������������������������������� 31 Ultraline 74R2 Electric Strikes �������������������������������������� 32 7400 Series Electric Strikes Components ����������������������������� 32

TABLE OF CONTENTS

TRIM 1000 Series Turns������������������������������������������������ 33 3000 Fixed Pull��������������������������������������������������� 33

5

4568, 4569 Eurostyle Deadlatch Handles Thick Door Kits ���������������� 49 FACEPLATES MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates��������� 49

3080 Series Entry Trim��������������������������������������������� 34

MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates ��������������������������������������������������������������� 49

3090, 3090P/C eForce ® Keyless Entry�������������������������������� 35

MS1850S Deadlocks Faceplates������������������������������������� 49

A100-3090H Keyless Entry and Aperio Hub Wholesale Kit��������������� 35

MS1850SN Deadlocks (Long Throw) Faceplates������������������������ 49

4060 Turn������������������������������������������������������� 36

MS1850SN Deadlocks (Hookbolt) Faceplates�������������������������� 50

4550 MS ® Deadlock Lever������������������������������������������ 36

1870 Flushbolt Faceplates������������������������������������������ 50

4560, 4565 Series Deadlatch Handles for 4300, 4500, 4900��������������� 36

MS+1890 Deadlock Faceplates�������������������������������������� 50

4560-010, 4565-010 Series Deadlatch Handles for MS+1890 ������������� 37

2331 Heavy Duty Deadbolt Faceplates�������������������������������� 50

4568, 4569 Eurostyle Deadlatch Handles ����������������������������� 37

3300 Fire-Rated Mortise Exit Device Faceplates������������������������ 50

®

4568-010, 4569-010 Series Deadlatch Handles for MS+1890 ������������� 38

4070 Short Throw Deadbolt Faceplates������������������������������� 51

4590 Deadlatch Paddle for 4300, 4500, 4900 �������������������������� 38

4500 Standard Duty Deadlatch Faceplates����������������������������� 51

4590-1X Deadlatch Paddle for MS+1890, 2190������������������������� 39

4530 Standard Duty Deadlatch Faceplates����������������������������� 51

4591 Deadlatch Paddle for 4300, 4500, 4900 �������������������������� 39

4900 Heavy Duty Deadlatch Faceplates������������������������������� 51

4591-1X Deadlatch Paddle for MS+1890, 2190�������������������������� 40

4900 Heavy Duty Deadlatch Special Faceplates������������������������ 51

4600 Heavy Duty Designer Deadlatch Handle �������������������������� 41

4920, 8300 Faceplates �������������������������������������������� 51 7100, 7160 Electric Strikes Faceplates�������������������������������� 52 7101 Electric Strikes Faceplates������������������������������������� 52

CYLINDERS 4024, 4025, 4029 Cylinder Pulls ������������������������������������� 42 4036 Mortise Cylinder ��������������������������������������������� 42 MS4043 Cylinder Guard ������������������������������������������� 43 4066 Thumbturn ������������������������������������������������� 43

7110 Electric Strikes Faceplates������������������������������������� 52 7111 Electric Strikes Faceplates������������������������������������� 52 7130 Electric Strikes Faceplates������������������������������������� 52 7131 Electric Strikes Faceplates������������������������������������� 52 7140, 7170 Electric Strikes Faceplates �������������������������������� 52

4580 Cam Disc �������������������������������������������������� 43 4581 Universal Cam Disc ������������������������������������������ 44 8650 Cylinder Escutcheon Kit ��������������������������������������� 44 8736 Rim Cylinder ������������������������������������������������ 44

POWER PS-SE Power Supply���������������������������������������������� 53 PS-1 Power Supply������������������������������������������������ 53 PS-LR Power Supply���������������������������������������������� 53

ACCESSORIES 4014 Two-Point Conversion Kit �������������������������������������� 45

4603, 4605, 4606 Transformer/Rectifier/Plezo Horn��������������������� 54 4612 Power Transfer Device���������������������������������������� 54

4015 Threshold Bolt����������������������������������������������� 45 4016 Header Bolt������������������������������������������������� 45 4085 Header Bolt (Pairs of Doors Only)������������������������������� 45 4089 Exit Indicator������������������������������������������������ 46 4104 Mounting Bridges��������������������������������������������� 46 91-0965 Universal Mounting Tab Kits for Installing MS ® Locks & Latches����� 46 2190 Dual Force ® Interconnected Deadbolt/Deadlatch Strikes ������������� 46 2290 Dual Force ® Interconnected Deadbolt/Deadlatch Strikes ������������� 47 4000 Series MS ® Deadlock Strikes ���������������������������������� 47 4800, MS 4804 Series Strikes��������������������������������������� 47 4901, 4902 Deadlatch Strikes ��������������������������������������� 48 4304 Deadlatch Strike��������������������������������������������� 48 THICK DOOR KITS 2190, 2290 Dual Force ® Interconnected Deadbolt/Deadlatch Thick Door Kit �� 48

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLOCKS

6

DEADLOCKS RT1050D

RITE Touch® Digital Glass Door Lock MODELS RT1050D Digital glass door lock for single or double doors

$600.00

RT-5C-1050 Extra cards (package of 5 cards)

$60.00

HOW TO ORDER Specify quantity and the following information. RITE TOUCH

MODEL

RT

1050D 1050D For single or double doors

1830

Bottom Rail Deadlock (Swingbolt) MODEL & FINISHES

313, 628

sw 1830

1830 31/32", or 1-1/8" cylinder height

$133.00

HOW TO ORDER Specify quantity and the following information. Order related products separately.

MS1837

PRODUCT NO.

DASH NO. (SPECIFY FOR CYLINDER HEIGHT AND LOCK DEPTH)

FINISH

1830

-02

-628

02 Cylinder Height 31/32" Dim. "A" 1-5/8"

628 Clear Anodized

03 Cylinder Height 1-1/8" Dim. "A" 1-25/32"

313 Dark Bronze Anodized

Series MS® Two-Point Deadlock 313, 335, 628

605, 626

MS1837 Includes 4001-011 strike, 36" cylinder height

$235.00

$320.00

MS1837 Cylinder height other than 36" (maximum cylinder height 65”)

$283.00

$380.00

MODELS & FINISHES

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FINISH

MS1837

-313 313 Dark Bronze Anodized

626 Satin Chrome

335 Black Anodized

628 Clear Anodized

605 Bright Brass If cylinder height other than 36” is required, specify exact height from bottom of door to cylinder center. Maximum cylinder height 65”.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLOCKS

MS1847

7

Series MS® Deadlock/Deadlatch MODEL & FINISH

630

MS1847 Deadlock, stainless steel

$57.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACE SHAPE, HUB ANGLE, LOCK OR LATCH

FINISH

MS1847

-02

-630 630 Satin Stainless

(See Configuration table below)

VERT.

45°

45°

(Blank)

22.5°

-02

SELFLATCHING

-06

VERT.

SELFLATCHING

22.5°

-13

45°

-09

MS1850S, MS1850S-050

-10

-11

Series MS® Deadlock 7/8"

31/32", 1-1/8", OR 1-1/2"

MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike

$79.00

$67.00

MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike

$79.00

$67.00

MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike

$84.00

$72.00

MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike

$79.00

$67.00

MODELS & BACKSETS

Schoolhouse function for above locks add $36.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE

BACKSET

BOLT SHAPE

HANDING

FINISH

MS185

0S

-2

1

0

-628

0S Flat

1 7/8"

1 Straight

5 LH or RHR

313 Dark Bronze Anodized

1S Radius

2 31/32"

5 Hookbolt

6 RH or LHR

335 Black Anodized

1SW Radius with weatherstrip

3 1-1/8"

0 Non-Handed*

628 Clear Anodized

2S Bevel

4 1-1/2" *Any flat or radius faceplate, except Schoolhouse.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLOCKS

8

MS1850SN, Series MS® Deadlock (ANSI Size) MS1850SN-050 MODELS MS1850SN Flat faceplate, any handing, 313, 335, or 628 finish, without strike

$95.00

MS1851SN Radius faceplate, any handing, 313, 335, or 628 finish, without strike

$95.00

MS1852SN Bevel faceplate, any handing, 313, 335, or 628 finish, without strike

$95.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE

ANSI SIZE

0

SN

MS185

BOLT SHAPE

HANDING

-41

0

FINISH

-628

0 Flat

41 Straight

5 LH or RHR

313 Dark Bronze Anodized

1 Radius

45 Hookbolt

6 RH or LHR

335 Black Anodized

0 Non-Handed*

628 Clear Anodized

2 Bevel

*Any flat or radius faceplate, except schoolhouse.

MS1861

Series MS® Bottom Rail Deadlock MODELS & FINISH

603

MS1861-01 One-point deadlock, vertical bolt operation only

$139.00

sw ms 1861

MS1861-02 Two-point deadlock, horizontal and vertical operation

$175.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

BOLT OPERATION

MS1861

-01 01 Vertical Bolt Only

FINISH

-603 603 Zinc plated steel

PACKAGING

-IB IB Individually Boxed

02 Vertical and Horizontal Bolts If tube spacers are required, specify QUANTITY and LENGTH.

1875

Two Point Deadlock MODEL & FINISH

603

1875 Two-point deadlock

$171.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

1875

PACKAGING

-IB IB Individually Boxed

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLOCKS

MS+1890

9

Series MS® Deadlock/Deadlatch MODELS & FINISHES

628, 313, 335

MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

$238.00

MS+1891 Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

$238.00

MS+1891W Radius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset

$248.00

MS+1892 Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

$238.00

MODEL MS+1893-IB Without faceplate, without strike

$210.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE

BACKSET

STRIKE SHAPE/LIP LENGTH

HANDING

FINISH

MS+189

1

-3

02

6

-628

0 Flat

2 31/32"

01 Flat/Standard Jamb

5 LH or RHR

313 Dark Bronze Anodized

1 Radius

3 1-1/8"

02 Radius/Standard Stile

6 RH or LHR

335 Black Anodized

1W Radius with weatherstrip

4 1-1/2"

17 Flat/Center Hung 4" Jamb

2 Bevel

628 Clear Anodized

21 Flat/Center Hung 4-1/2" Jamb For door thickness other than 1-3/4”, contact factory.

MS1950, MS1950-050

Series MS® Deadlock MODELS MS1950 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

$123.00

MS1951 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

$123.00

MS1951W Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

$128.00

MS1952 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset

$123.00

Schoolhouse function for above locks add $36.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE

MS195

BACKSET

0

-2

BOLT SHAPE

1

HANDING

0

FINISH

-628

0 Flat

2 31/32"

1 Straight

5 LH or RHR

313 Dark Bronze Anodized

1 Radius

3 1-1/8"

5 Hookbolt

6 RH or LHR

335 Black Anodized

1W Radius with weatherstrip

4 1-1/2"

0 Non-Handed*

628 Clear Anodized

2 Bevel *Any flat or radius faceplate except schoolhouse.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLOCKS

10

2190

Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors STANDARD TRIM SET

ELECTRIFIED TRIM SET

LOW PROFILE TRIM

10B, US32, US32D

US3, US4

10B, US32, US32D

US3, US4

10B, US32, US32D

US3, US4

2190 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)

$589.00

$671.00

$748.00

$845.00

$488.00

$570.00

2190 Deadbolt/Deadlatch with flat/ centerhung 4” or 4.5” strike, standard series handle designation (01, 02, 03)

$604.00

$686.00

$763.00

$860.00

$503.00

$585.00

2190 Deadbolt/Deadlatch with flat or radius strike, designer lever series designation (MD through MW)

$634.00

$716.00

$793.00

$890.00

$533.00

$615.00

628, 313, 335

N/A

MODELS & TRIM SETS

MODELS & FINISHES 2190 BOXED LOCK Less lever trim, with adjustable faceplate and choice of standard or radius strike EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim)

$272.00 $157.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

BACKSET

STRIKE

FACEPLATE FINISH

TRIM

HANDLE DESIGNATION

TRIM AND HANDLE FINISH

2190

-3

1

1

-1

01

32D

3 1-1/8" 4 1-1/2"

0 None

1 Clear Anodized 628

0 None

00 No Handle

03 Bright Brass (US3)

1 Standard Flat

2 D  ark Bronze

1 With Trim Set

STANDARD SERIES:

04 Satin Brass (US4)

2 Radius Strike

3 Black Anodized 335

2 W  ith Electrified

01 Curve

10B Dark Bronze (US10B)

3 Low Profile Trim

02 Round

32 Bright Stainless (US32)

03 Square

32D Satin Stainless (US32D)

3 Flat/Center Hung 4"

4 Flat/Center

Hung 4-1/2"

Anodized 313

Trim Set

DESIGNER SERIES: MD

MJ

ME

MN (Handed)

MG

MV (Handed)

MI

MW

Trim options 1 and 2 are for outswing doors only.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLOCKS

2290

11

Dual Force® Interconnected Deadbolt/Deadlatch for Wood or Hollow Metal Stile and Rail Doors STANDARD TRIM SET

ELECTRIFIED TRIM SET

LOW PROFILE TRIM

10B, US32, US32D

US3, US4

10B, US32, US32D

US3, US4

10B, US32, US32D

US3, US4

2290 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)

$605.00

$688.00

$764.00

$867.00

$505.00

$577.00

2290 Deadbolt/Deadlatch with flat or radius strike, designer series handle designation (MD through MW)

$650.00

$733.00

$809.00

$912.00

$550.00

$622.00

313, 335, 628

N/A

MODELS & TRIM SETS

MODELS & FINISHES 2290 BOXED LOCK Less lever trim, with adjustable faceplate and standard strike

$280.00

EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim)

$159.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

BACKSET

STRIKE

FACEPLATE FINISH

TRIM

HANDLE DESIGNATION

TRIM AND HANDLE FINISH

2290

-3

1

1

-1

01

32D

3 1-1/8"

0 None

0 US to match trim finish

0 None

00 No Handle

03 Bright Brass (US3)

4 1-1/2"

1 Standard Flat

1 Clear Anodized 628

1 With Trim Set

STANDARD SERIES:

04 Satin Brass (US4)

2 Dark Bronze Anodized

2 With Electrified

01 Curve

10B Dark Bronze (US10B)

3 Black Anodized 335

3 Low Profile Trim

02 Round

32 Bright Stainless (US32)

03 Square

32D Satin Stainless (US32D)

313

Trim Set

DESIGNER SERIES: MD

MJ

ME

MN (Handed)

MG MI

MV (Handed) MW

Trim options 1 and 2 are for outswing doors only.

2331

Heavy Duty Deadbolt MODEL & FINISHES 2331 Deadlock and strike

121, 626

605, 625

$290.00

$317.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

2331

FINISH

-626 121 To Match Dark Bronze Anodized 313 605 Bright Brass 625 Bright Chrome 626 Satin Chrome

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLOCKS

12

4070

Series Short Throw Deadbolt (Projection Style) MODELS & FINISHES

313, 335, 628

4070 Flat faceplate, 7/8", 31/32", or 1-1/8" backset

$160.00

4071 Radius faceplate, 7/8", 31/32", or 1-1/8" backset

$160.00

4072 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset

$160.00

MODEL 4073 Without faceplate

$155.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE

407

BACKSET

2

HANDING

-2

FINISH

6

-628

0 Flat

1 7/8"

5 LH or RHR

313 Dark Bronze Anodized

1 Radius

2 31/32"

6 RH or LHR

335 Black Anodized

2 Bevel

3 1-1/8"

0 Non-Handed*

628 Clear Anodized *Any flat or radius faceplate.

4189, 4190

Flush Locksets (Including Deadlock) STANDARD LOCK FACE

MODELS & FINISHES

STAINLESS STEEL LOCK FACE

4189-IB Flush lockset, individually boxed

$93.00

$100.00

4190-IB Flush lockset, individually boxed with cylinder

$123.00

$130.00

4195-IB Dummy flushset, individually boxed

$62.00

$69.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

LOCKSET EXTERIOR

LOCK FACE

STILE THICKNESS

FINISH

KEYING OPTIONS

PACKAGING

41

90

-09

-1

-130

-01

IB

89 Without Cylinder

00 Without Lock

1 1" to 1-3/8"

130 To match Clear

00 Without Cylinder

90 With Cylinder

09 Radius

2 1-7/16" to 1-5/8"

121 To match Dark Bronze Anodized 313

01 Keyed Different

95 Dummy

09S Radius Stainless Steel

3 1-11/16" to 2"

119 To match Black Anodized 335

02 Keyed Alike in Pairs

10 Square 10S Square Stainless Steel

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

Anodized 628

IB Individually Boxed

DEADLOCKS

4430, 4431

13

Flush Locksets (Including Deadlock) STANDARD LOCK FACE

STAINLESS STEEL LOCK FACE

4430-IB ABS flush lockset, individually boxed

$64.00

$71.00

4431-IB ABS flush lockset with cylinder, individually boxed

$98.00

$105.00

4432-IB ABS dummy flushset, individually boxed

$28.00

$35.00

MODELS & FINISH

Kitted Options MODELS & FINISHES

GRAY

4413 Grip pull for use with 4189, 4190

$21.00

4453-02 Grip pull for use with 4430, 4431

335

$31.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

LOCKSET EXTERIOR

LOCK FACE

STILE THICKNESS

KEYING OPTIONS

PACKAGING

44

31

-09

-05

-01

-IB

30 Without Cylinder

00 Without Lock

00 1" to 1-5/16"

00 Without Cylinder

31 With Cylinder

09 Radius

05 1-3/8" to 1-5/8"

01 Keyed Different

32 Dummy

09S Radius Stainless Steel

08 1-3/4" to 2"

02 Keyed Alike in Pairs

IB Individually Boxed

10 Square 10S Square Stainless Steel

5017

Wood Door Deadlock/Deadlatch MODELS & FINISH

630

5017-00 Stainless steel deadlock

$57.00

5017-02 Self-latching deadlock

$57.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

LATCH CONFIGURATION

5017

-00 00 Standard 02 Self Latching

5500

Wood Door Deadlock for Sliding Doors MODELS

626

5500-20-626 Lockset, strike and trim included for 1-1/4” thick sliding wood doors

$120.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

DOOR THICKNESS

FINISH

5500

-20

-626

20 1-1/4" Thick

626 Satin Chrome

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLATCHES

14

DEADLATCHES 4300

Steel Hawk® Electrified Deadlatch (eLatch) MODELS & FINISHES

313, 335, 628

4300 31/32", 1-1/8", or 1-1/2" backset

$402.00

4300-M Monitored option, 31/32”, 1-1/8”, or 1-1/2” backset.

$462.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

BACKSET

MONITORING

STRIKE

STIRKE SHAPE/LIP LENGTH

FACEPLATE FINISH

4300

-3

M

-2

01

-628

2 31/32"

0 None

1 Surface Mount (4304)

01 Flat/Standard Jamb

313 Dark Bronze Anodized

3 1-1/8"

M Monitored

2 Mortised (4901) 4-5/8"

02 Radius/Standard Stiles**

335 Black Anodized

17 Flat/Center Hung 4" Jamb**

628 Clear Anodized

4 1-1/2"

21 Flat/Center Hung 4-1/2" Jamb** ** See ACCESSORIES for available 4901 strike options.

4300

RITE Pack® MODELS 4300-20 31/32" backset, surface mount or mortise strike, 313 and 628 faceplates

$417.00

4300-30 1-1/8" backset, surface mount or mortise strike, 313 and 628 faceplates

$417.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

BACKSET

4300

-3 2 31/32" 3 1-1/8"

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

MONITORING

0 0 None

STRIKE

RITE PACK

-1

RP

1 Surface Mount (4304) 2 Mortised (4901) 4-5/8"

DEADLATCHES

4510

15

Standard Duty Deadlatch MODELS & FINISHES

313, 335, 628

4510 Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

$79.00

4511 Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

$79.00

4511W Radius faceplate with weatherstrip, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

$84.00

4512 Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included

$79.00

MODEL 4513-IB Without faceplate, without strike

$58.00

HOW TO ORDER Specify quantity and the following information. Order related products separately.

4530

PRODUCT NO.

FACEPLATE

BACKSET

HANDING

STRIKE SIZE

STRIKE SHAPE/LIP LENGTH

FACEPLATE FINISH

451

1

-3

6

-2

01

-628

0 Flat

1 7/8"

5 LH or RHR

1 Mortised (4901) 4-5/8"

01 Flat/Standard Jamb

313 Dark Bronze

1 Radius

2 31/32"

6 RH or LHR

2 Mortised (4902) 2-5/8"

02 Radius/Standard Stiles

335 Black Anodized

1W Radius with weatherstrip

3 1-1/8"

17 Flat/Center Hung 4" Jamb

628 Clear Anodized

2 Bevel

4 1-1/2"

21 Flat/Center Hung 4-1/2" Jamb

Anodized

Standard Duty Deadlatch MODELS & FINISHES

313, 335, 628

4530 Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included

$97.00

4531 Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included

$97.00

4532 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included

$97.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

453

FACEPLATE

1

BACKSET

-3

HANDING

STRIKE SIZE

STRIKE SHAPE/LIP LENGTH

01

FACEPLATE FINISH

6

-1

0 Flat

1 7/8"

5 LH or RHR

1 Mortised (4901) 4-5/8"

01 Flat/Standard Jamb

313 Dark Bronze Anodized

-628

1 Radius

2 31/32"

6 RH or LHR

2 Mortised (4902) 2-5/8"

02 Radius/Standard Stiles

335 Black Anodized

2 Bevel

3 1-1/8"

17 Flat/Center Hung 4" Jamb

628 Clear Anodized

21 Flat/Center Hung 4-1/2" Jamb

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DEADLATCHES

16

4781

Two-Point Deadlatch with Paddle MODEL & FINISHES

313, 335, 628

US26, US26D

$307.00

$428.00

4781 Paddle includes dogging feature HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

OPERATION

4781

4900

T

PADDLE FINISH

-021

-628

T Top rod only

021 Push to LEFT

313 Dark Bronze Anodized

US3 Bright Brass

– Standard rod

041 Push to RIGHT

335 Black Anodized

US26 Bright Chrome

628 Clear Anodized

US26D Satin Chrome

Heavy Duty Deadlatch MODELS & FINISHES

313, 335, 628

4900 Any handing, 31/32", 1-1/8", or 1-1/2" backset

$108.00

4911W Radius with weatherseal faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset

$113.00

MODEL 4913-IB Without faceplate or strike

$83.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE

49

BACKSET

00

-3

HANDING

STRIKE SIZE

STRIKE SHAPE/LIP LENGTH

-2

01

5

FACEPLATE FINISH

-628

00 Standard

2 31/32"

5 LH or RHR

1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb

313 Dark Bronze Anodized

11W Radius with

3 1-1/8"

6 RH or LHR

2 Mortised (4902) 2-5/8" 02 Radius/Standard Stile

335 Black Anodized

Weatherseal

4 1-1/2"

17 Flat/Center Hung 4" Jamb

628 Clear Anodized

21 Flat/Center Hung 4-1/2" Jamb

4920AN

Heavy Duty Deadlatch (ANSI Size) MODELS & FINISHES

313, 335, 628

4920AN Flat faceplate, 1-1/2” or 2-3/4” backset with 4506 strike

$132.00

4920AN Flat faceplate, 1-1/2” or 2-3/4” backset without strike

$117.00

MODEL 4923AN-IB Without faceplate or strike

$97.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

BACKSET

4920AN

4

HANDING

6

STRIKE

-602

FACEPLATE FINISH

-313

4 1-1/2"

5 LH or RHR

000 Less Strike

313 Dark Bronze Anodized

5 2-3/4"

6 RH or LHR

602 4506 Strike

335 Black Anodized 628 Clear Anodized

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

FLUSHBOLTS & PIVOTS

17

FLUSHBOLTS & PIVOTS 1870 sw 1870 series

Cylinder-Operated Flushbolt STANDARD CYLINDER HEIGHT

CYLINDER HEIGHT OVER 12" (SPECIFY)

1870 Flat faceplate, 313, 335, or 628 finish

$111.00

$144.00

1871 Radius faceplate, 313, 335, or 628 finish

$111.00

$144.00

1871W Radius faceplate with weatherstrip, 313, 335, or 628 finish

$113.00

$146.00

1872 Bevel faceplate, 313, 335, or 628 finish

$111.00

$144.00

MODELS & CYLINDER HEIGHT

For cylinders over 12” specify cylinder height, 65” maximum. Contact factory for cylinder heights taller than 65”.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE SHAPE

BACKSET

HANDING

FINISH

187

0

-2

0

-628

0 Flat

2 31/32"

0 Non-Handed*

313 Dark Bronze Anodized

1 Radius

3 1-1/8"

5 LH or RHR

335 Black Anodized

6 RH or LHR

628 Clear Anodized

1W Radius with weatherstrip 2 Bevel

*Any flat or radius faceplate.

1870HM

Cylinder-Operated Flushbolt MODEL & FINISHES

313, 335, 628

1870HM For hollow metal, 1-1/4" backset

$152.00 Cylinder height, 65" maximum. Contact factory for cylinder heights taller than 65”.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE SHAPE

HANDING

FINISH

187

0HM

5

-628

0HM Flat

0 Non-Handed*

313 Dark Bronze Anodized

2HM Bevel

5 LH or RHR

335 Black Anodized

6 RH or LHR

628 Clear Anodized *Any flat or radius faceplate.

1877

Cylinder-Operated Flushbolt MODELS & FINISHES

628, 313

605, 626

1877 1-1/4" backset, 13-1/2" cylinder height

$187.00

$270.00

1877 1-1/4" backset, cylinder height other than 13-1/2" (maximum cylinder height 57.5")

$235.00

$320.00

Maximum cylinder height 57.5”.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FINISH

1877

-628 313 Dark Bronze Anodized

626 Satin Chrome

605 Bright Brass

628 Clear Anodized

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

FLUSHBOLTS & PIVOTS

18

Two-Point Flushbolts

MS1880, MS1881

MODELS & FINISHES

119, 121, 682

sw ms 1880

MS1880 Hourglass shaped turn

$141.00

MS1881 Teardrop shaped turn

$141.00

MODEL

119, 121, 682

TDK-1880 Tall door kit for doors over 84". 144" maximum

$26.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

TURN SHAPE

CYLINDER HEIGHT*

FINISH

MS18

80

-01

-682

MS18

80 Hourglass

01 31" to 35"

119 Black

81 Teardrop

02 35-1/16" to 39"

121 Dark Bronze

03 39-1/16" 43"

682 Satin Chrome

04 43-1/16" to 47" 05 47-1/16" to 51" *Distance from floor to cylinder centerline.

MS2180

Auto-Release Two-Point Flushbolt MODELS & FINISHES

119, 121, 682

MS2180 7’, 8’, 9’, 10’ door height

$213.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

TURN SHAPE

DOOR HEIGHT (FROM FLOOR TO TOP OF DOOR)

FINISH TO MATCH

MS218

0

-07

-130

0 Hourglass

07 Up to 7' Door

119 Black Anodized

1 Teardrop

08 Up to 8' Door

121 Dark Bronze Anodized

2 Flush

09 Up to 9' Door

130 Clear Anodized

10 Up to 10' Door

B1921, B1923

Reinforcing Pivots MODELS & FINISH

US2G

B1921 1/2" to center line of 4" hinge. Pin uses small pin and bushing.

$82.00

B1923 3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing.

$68.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

MODEL

B192

1 1 4" 3 4-1/2"

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

EXIT DEVICES

19

EXIT DEVICES Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options. Split finishes (faceplate/pushbar) are not available.

8099

Dummy Pushbar 313, 335, 628

US4, US32D

US3, US32

8099-00 Dummy pushbar without mechanism, for doors NOT requiring an exit device.

$217.00

$468.00

$524.00

8099-M0 Active dummy bar without latching mechanism, without monitoring switches.

$287.00

8099-M1 Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar.

$342.00

$593.00

$649.00

8099-M2 Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar.

$407.00

$658.00

$714.00

MODELS & FINISHES

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

MONITOR

DOOR TYPE

PUSHBAR FINISH

WIDTH

US FINISH

8099

-M1

-3

0

36

-US32

00 Inactive Dummy Bar

3 Aluminum

0 US Finish

30 30 inches

US3 Bright Brass

M0 A ctive Dummy Bar, no monitoring switches

4 Wood or hollow metal

1 Clear Anodized 628

36 36 inches

US4 Satin Brass

M1 A ctive Dummy Bar, one monitoring switch

2 Dark Bronze Anodized 313

42 42 inches

US32 Bright Stainless

M2 A ctive Dummy Bar, two monitoring switches

3 Black Anodized 335

48 48 inches

US32D Satin Stainless

3100, 8100

Surface Vertical Rod Exit Device MODELS & FINISHES

313, 335, 628

US4, US32D

US3, US32

8100 Surface vertical rod for wood and hollow metal doors

$870.00

$1,121.00

$1,344.00

8100T Top rod only

$795.00

$1,021.00

$1,219.00

3100 Fire-rated surface vertical rod

$1,088.00

$1,346.00

$1,546.00

3100T Top rod only for metal doors

$1,013.00

$1,246.00

$1,421.00

3100W Top rod only for wood doors

$1,013.00

$1,246.00

$1,421.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

PUSHBAR FINISH

ROD TYPE

DEVICE OPTIONS

MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

US FINISH

END CAPS OPTION FOR US FINISH

81

00

-

SE

M2

-30

-US32D

MEC

31 Fire Rated

00 US Finish

T Top Rod only

LR Electric Latch Retraction

M Single Switch

30 30 inches

US3 Bright Brass

81 Life-Safety

11 Clear

W T op Rod only -

SE Silent Electrification Latch Retraction

M2 Dual Switch

36 36 inches

US4 Satin Brass

22 Dark Bronze Anodized 313

- Standard rod

C Cylinder Dogging (non-fire rated devices ONLY)

(Blank) No Monitor

42 42 inches

US32 Bright Stainless

ED Electric Dogging

48 48 inches

US32D Satin Stainless

(Blank) No Option

AXXB Alarmed Exit Device where XX is door opening width

Anodized 628

33 Black

Anodized 335

Wood doors

MEC Matching End Caps

* Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

EXIT DEVICES

20

8200

Narrow Stile Surface Vertical Rod Exit Device MODELS & FINISHES

313, 335, 628

US4, US32D

US3, US32

8200 Narrow stile surface vertical rod exit device

$816.00

$1,065.00

$1,290.00

8200T Top rod only

$741.00

$965.00

$1,165.00

313, 335, 628

US4, US32D

US3, US32

$110.00

$143.00

$182.00

313, 335, 628

US32D

US32

$116.00

$151.00

$190.00

Kitted Options MODEL & FINISHES 8055 Tall door kit for doors up to 10' tall, for use with 8100, 8200 MODEL & FINISHES 3055 Tall door kit for doors up to 10' tall, for use with 3100 HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

PUSHBAR FINISH

ROD TYPE

DEVICE OPTIONS

MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

US FINISH

82

00

-

ED

M2

-36

-US3

T Top Rod only

LR Electric Latch Retraction

M Single Switch

30 30 inches

US3 Bright Brass

- Standard rod

SE Silent Electrification Latch Retraction

M2 Dual Switch

36 36 inches

US4 Satin Brass

22 Dark Bronze Anodized 313

C C  ylinder Dogging

(Blank)

42 42 inches

US32 Bright Stainless

33 Black Anodized 335

ED Electric Dogging

48 48 inches

US32D Satin Stainless

(Blank) No Option

AXXB Alarmed Exit Device where XX is door opening width

82 Life-Safety

00 US Finish 11 Clear Anodized 628

3300, 8300

No Option

END CAPS OPTION FOR US FINISH

MEC Matching End Caps

Mortise Exit Device MODELS & FINISHES

313, 335, 628

US4, US32D

US3, US32

8300 Mortise type exit device

$666.00

$1,000.00

$1,100.00

3300 Fire-rated mortise type

$958.00

$1,200.00

$1,320.00

Kitted Options MODELS & FINISH

US32D

8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only

$57.00

4009-01 Open back strike for 1-3/4" thick doors

$130.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

FACEPLATE FINISH

FACE SHAPE

DEVICE OPTIONS

MONITORING OPTION

DOOR HANDING

PUSHBAR FINISH

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

83

3

0

ED

M

-7

3

A36B

US FINISH

END CAPS OPTION

MEC Matching End Caps

33 Fire Rated

0 US Finish

0 Flat

(3300 only)

LR Electric Latch Retraction

M Single Switch

7 RHR

0 US Finish

30 30 inches

US3 Bright Brass

83 Life-Safety

1 Clear

2 Bevel

SE Silent Electrification

M2 Dual Switch

8 LHR

1 Clear

Anodized 628

36 36 inches

US4 Satin Brass

2 Dark Bronze Anodized 313

C Cylinder Dogging (nonfire rated devices ONLY)

(Blank)

2 Dark Bronze Anodized 313

42 42 inches

US32 Bright Stainless

3 Black

ED Electric Dogging

3 Black

48 48 inches

Stainless

Anodized 628

(8300 only)

Anodized 335

Latch Retraction

- Without Options

No Monitor

Anodized 335

US32D Satin

AXXB Alarmed Exit Device where XX is door opening width

*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

EXIT DEVICES

8400

21

Narrow Stile Mortise Exit Device MODEL & FINISHES

313, 335, 628

US4, US32D

US3, US32

$595.00

$885.00

$985.00

8400 Mortise type exit device for single leaf

Kitted Options MODELS

US32D

8455-01 Long face strike for covering MS strike prep

$94.00

8460-17-630 Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door

$72.00

91-0995-02 * 2" thick door kit for use with 8300, 8400

$15.00

91-0995-03 * 2-1/4" thick door kit for use with 8300, 8400

$15.00

91-0995-04 * 2-1/2" thick door kit for use with 8300, 8400

$17.00

91-0995-05 * 2-3/4" thick door kit for use with 8300, 8400

$22.00

91-0995-06 * 3" thick door kit for use with 8300, 8400

$22.00

91-0325-01 Thermal door kit, 1/4" cladding, for use with 8400

$76.00

91-0325-02 Thermal door kit, 1/2" cladding, for use with 8400

$137.00 * Order 8360-xx or 8460-xx long lip strike kit separately as required.

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

FACEPLATE FINISH

FACE SHAPE

DEVICE OPTIONS

MONITORING OPTION

BACKSET

DOOR HANDING

PUSHBAR FINISH

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

84

1

4

SE

M2

-4

7

1

42

84 Life-Safety

US FINISH

0 US Finish

0 Flat, Radius, Bevel

LR Electric Latch Retraction

M Single Switch

2 31/32"

7 RHR

0 US Finish

30 30 inches

US3 Bright

1 Clear

4 Radius w/

SE Silent

M2 Dual Switch

3 1-1/8"

8 LHR

1 Clear

36 36 inches

Brass

(Blank)

4 1-1/2"

Bronze Anodized 313

42 42 inches

US32 Bright Stainless

3 Black

48 48 inches

Anodized 628

2 Dark

Bronze Anodized 313

3 Black

Anodized 335

Weatherstrip

Electrification Latch Retraction

C Cylinder Dogging ED Electric Dogging - Without Options

No Monitor

Anodized 628

2 Dark

Anodized 335

Brass

END CAPS OPTION FOR US FINISH

MEC Matching End Caps

US4 Satin

US32D

Satin Stainless

AXXB Alarmed Exit Device where XX is door opening width

Radius with weatherstrip faceplate is not available in US finishes.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

EXIT DEVICES

22

3600, 8500

Metal Door Concealed Vertical Rod Exit Device MODELS & FINISHES

313, 335, 628

US4, US32D

US3, US32

8500 Concealed vertical rod exit device

$620.00

$911.00

$958.00

8500T Top rod only

$545.00

$811.00

$833.00

$1,042.00

$1,271.00

$1,364.00

$967.00

$1,171.00

$1,239.00

3600 Fire-rated concealed vertical rod 3600T Top rod only

Kitted Options MODEL 3655 Tall door kit for doors taller than 66" above bar height, up to 10'

$52.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

PUSHBAR FINISH

ROD TYPE

DEVICE OPTIONS

MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

US FINISH

85

00

T

ED

M

-36

-US32D

36 Fire Rated

00 US Finish

T Top Rod only

LR E lectric Latch Retraction

M S ingle Switch

30 30 inches

US3 Bright Brass

85 Life-Safety

11 Clear Anodized 628

- Standard rod

SE Silent Electrification

M2 D  ual Switch

36 36 inches

US4 S atin Brass

22 Dark Bronze Anodized 313

C Cylinder Dogging (non-fire rated devices only)

(Blank)

42 42 inches

US32 Bright Stainless

33 B lack Anodized 335

ED E lectric Dogging

48 48 inches

US32D Satin Stainless

(Blank) No Option

AXXB Alarmed Exit Device where

Latch Retraction

No Monitor

END CAPS OPTION FOR US FINISH

MEC Matching End Caps

XX is door opening width

*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

8600

Narrow Stile Concealed Vertical Rod Exit Device MODELS & FINISHES

313, 335, 628

US4, US32D

US3, US32

8600 Concealed vertical rod exit device

$583.00

$891.00

$932.00

8600T Top rod only

$533.00

$811.00

$852.00

Kitted Options MODEL 8655 Tall door kit for doors up to 10’ for use with 8500, 8600

$50.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

PUSHBAR FINISH

ROD TYPE

DEVICE OPTIONS

MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

86

22

T

SE

M2

-36

86 Life-Safety

US FINISH

00 US Finish

T Top Rod only

LR E lectric Latch Retraction

M S ingle Switch

30 30 inches

US3 Bright Brass

11 Clear Anodized 628

- Standard rod

SE Silent Electrification Latch Retraction

M2 D  ual Switch

36 36 inches

US4 S atin Brass

22 Dark Bronze Anodized 313

C C  ylinder Dogging

(Blank)

42 42 inches

US32 Bright Stainless

33 B lack Anodized 335

ED E lectric Dogging

48 48 inches

US32D Satin Stainless

(Blank) No Option

AXXB Alarmed Exit Device where

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

No Monitor

XX is door opening width

END CAPS OPTION FOR US FINISH

MEC Matching End Caps

EXIT DEVICES

3700, 8700

23

Rim Exit Device MODELS & FINISHES

313, 335, 628

US4, US32D

US3, US32

8700 Rim type exit device

$429.00

$680.00

$724.00

3700 Fire-rated rim type

$725.00

$919.00

$1,019.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

PUSHBAR FINISH

37

00

DEVICE OPTIONS

MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

US FINISH

EL

M1

-36

-US3

END CAPS OPTION FOR US FINISH

VOLTAGE

MEC

-12

37 Fire Rated

00 US Finish

EL Electric Latch Retraction

MEC Matching

(indicate 12V/24V)

M S ingle Switch

30 30 inches

US3 Bright Brass

87 Life-Safety

01 C  lear Anodized 628

SE Silent Electrification Latch Retraction

M2 D  ual Switch

36 36 inches

US4 S atin Brass

24 Volts

02 D  ark Bronze Anodized 313

C C  ylinder Dogging

No Monitor

(Blank)

42 42 inches

US32 Bright Stainless

(For EL Option Only)

03 B lack Anodized 335

ED E lectric Dogging

48 48 inches

US32D Satin Stainless

- Without Options

AXXB Alarmed Exit Device where

End Caps

12 Volts

XX is door opening width

*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

8800

Narrow Stile Rim Exit Device MODEL & FINISHES

313, 335, 628

US4, US32D

US3, US32

$412.00

$656.00

$700.00

N/A

313, 628

8800 Rim type exit device

Kitted Options MODELS 3889-08 Mullion for doors up to 8' for use with 8700, 3700

$500.00

3889-10 Mullion for doors up to 10' for use with 8700, 3700

$600.00

3890-08 Aluminum mullion for doors up to 8' for use with 8800

$549.00

3890-10 Aluminum mullion for doors up to 10' for use with 8800

$572.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

PUSHBAR FINISH

DEVICE OPTIONS

MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

88

01

C

M2

-36

88 Life-Safety

US FINISH

END CAPS OPTION FOR US FINISH

VOLTAGE

-12

00 US Finish

EL Electric Latch Retraction (indicate 12V/24V)

M S ingle Switch

30 30 inches

US3 Bright Brass

MEC Matching End Caps

01 C  lear Anodized 628

SE Silent Electrification Latch Retraction

M2 D  ual Switch

36 36 inches

US4 S atin Brass

24 Volts

02 D  ark Bronze Anodized 313

C C  ylinder Dogging

(Blank) No Monitor

42 42 inches

US32 Bright Stainless

(For EL Option Only)

03 B lack Anodized 335

ED E lectric Dogging

48 48 inches

US32D Satin Stainless

- Without Options

AXXB Alarmed Exit

12 Volts

Device where XX is door opening width

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

EXIT DEVICES

24

3900, 8900

Wood Door Concealed Vertical Rod Exit Device MODELS & FINISHES

313, 335, 628

US4, US32D

US3, US32

8900 Wood door concealed vertical rod exit device

$700.00

$1,020.00

$1,100.00

3900 Fire-rated wood door concealed vertical rod

$1,115.00

$1,315.00

$1,500.00

Kitted Options MODEL 8955-01 Tall door kit for doors up to 10’ for use with 8900

$52.00

3955-01 Tall door kit for doors up to 10’ for use with 3900

$52.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. MODEL

PUSHBAR FINISH

ROD TYPE

DEVICE OPTIONS

MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening

US FINISH

89

00

W

LR

M2

-36

-US32

39 Fire Rated

00 US Finish

W Top Rod Wood LR E lectric Latch Retraction

M S ingle Switch

30 30 inches

US3 Bright Brass

SE Silent Electrification Latch Retraction

M2 D  ual Switch

36 36 inches

US4 S atin Brass

22 D  ark Bronze Anodized 313

C Cylinder Dogging (non-fire rated devices only)

(Blank) No Monitor 42 42 inches

33 B lack Anodized 335

ED E lectric Dogging

48 48 inches

(Blank) No Option

AXXB Alarmed Exit Device where

89 Life-Safety 11 Clear Anodized 628

- Standard rod

END CAPS OPTION FOR US FINISH

MEC Matching End Caps

US32 Bright Stainless US32D Satin Stainless

XX is door opening width

*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

ACCESSORIES FOR EXIT DEVICES OPTIONS & FINISHES

N/A

SE Silent electrification motorized latch retraction

$641.00

EL Electric latch retraction for use with 3700, 8700, 8800 rim exit devices

$340.00

ELD Electric latch retraction with mechanical dogging for rim exit devices only

$388.00

LR Electric latch retraction

$582.00

ALARM Battery-operated alarmed exit device

$447.00

M1 Request to exit - monitor/single signal switch

$117.00

M2 Request to exit - monitor/double signal switch

$175.00

C Cylinder dogging

$47.00

ED Electric dogging

$398.00

MEC Matching end caps

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

US4, US32D

US3, US32

$77.00

$99.00

EXIT DEVICES • ELECTRIC STRIKES

25

KITTED OPTIONS FOR EXIT DEVICES MODELS & FINISHES

N/A

ALARM EXIT KIT Kit for retrofitting an alarm function to an existing Adams Rite exit device. Includes new pushbar, end caps and installation hardware. 91-0897-01 Single signal switch kit, retrofits to 3000/8000

$100.00

91-0897-02 Double signal switch kit, retrofits to 3000/8000

$160.00

313, 335, 628

US4, US32D

US3, US32

US26D, US3

$565.00

$790.00

$832.00

26-0584-XXX-MP Sex bolts, 2 per bag, 2 kits required per exit device

$20.00

MODIFICATION OPTIONS FOR EXIT DEVICES MODELS THICK DOOR For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template, for CVR and mortise devices

$60.00

UNIQUE DOOR Cutting charges for non-standard lengths between 30" and 48"

$80.00

NOTE: Thick door modification options are available for 8300, 8400, and 8600 model exit devices only.

ELECTRIC STRIKES 7100, 7101 es 7100

Electric Strikes MODELS & FINISHES

313, 335, 628

626

7100 For aluminum jambs

$176.00

$200.00

7101 For radius aluminum stiles

$176.00

7100-XX7, OR -XX9 Monitoring signal switches

$276.00

$300.00

Lip Extensions up to 3” for center-hung or non-flush doors add $32.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE SHAPE

VOLTAGE

CURRENT AND DUTY

FEATURES*

FINISH**

LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge)

710

0

-3

1

0

-628

-00

0 Flat

3 12 Volt

1 DC Continuous 0 Standard/Fail-Secure

313 Dark Bronze

00 1-1/16" or less

05 2"

1 Radius

5 24 Volt

4 AC Intermittent

335 Black Anodized

01 1-1/2"

07 2-1/4"

or Intermittent

5 Fail-Safe

Anodized

7 Monitored/ Fail-Safe

626 Satin Chrome

02 1-5/8"

09 2-1/2"

9 Monitored/ Fail-Secure

628 Clear Anodized

03 1-3/4"

12 2-7/8"

*Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ELECTRIC STRIKES

26

7110, 7111

Electric Strikes MODELS & FINISHES

652

7110 For wood jambs

$210.00

7111 For wood jambs, long faceplate

$212.00

7110-XX7, OR -XX9 Monitoring signal switches

$310.00 Lip Extensions up to 3” for center-hung or non-flush doors add $32.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE LENGTH

VOLTAGE

CURRENT AND DUTY

FEATURES*

FINISH

LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge)

711

0

-3

1

0

-652

-00

0 7-15/16"

3 12 Volt

1 DC Continuous 0 Standard/Fail-Secure

1 10-1/4"

5 24 Volt

4 AC Intermittent

00 1-1/16" or less

05 2"

5 Fail-Safe

01 1-1/2"

07 2-1/4"

7 Monitored/ Fail-Safe

02 1-5/8"

09 2-1/2"

9 Monitored/ Fail-Secure

03 1-3/4"

12 2-7/8"

or Intermittent

652 Satin Chrome

*Fail-secure can be field converted to fail-safe or vice-versa.

7130, 7131

Electric Strikes MODELS & FINISHES

313, 335, 628

7130 For aluminum jambs, pre-cut for MS lock strike

$181.00

7131 For radius aluminum stiles, pre-cut for MS lock strike

$181.00 Lip Extensions up to 3” for center-hung or non-flush doors add $32.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE LENGTH

VOLTAGE

713

0

-3

0 Flat

3 12 Volt

1 Radius

5 24 Volt

CURRENT AND DUTY

FEATURES*

1

0

1 DC Continuous 4 AC Intermittent

or Intermittent

FINISH

LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge)

-313

-00

0 Standard/Fail-Secure

313 Dark Bronze

00 1-1/16" or less

05 2"

5 Fail-Safe

335 Black Anodized

01 1-1/2"

07 2-1/4"

628 Clear Anodized

02 1-5/8"

09 2-1/2"

03 1-3/4"

12 2-7/8"

Anodized

*Fail-secure can be field converted to fail-safe or vice-versa.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ELECTRIC STRIKES

7140

27

Electric Strike MODEL & FINISHES 3/32"

313, 335, 628

626

$176.00

$200.00

7140 ANSI size for hollow metal and wood jambs

FITS STANDARD 2.4mm MOUNTING TAB ANSI PREP

Lip Extensions up to 3” for center-hung or non-flush doors add $32.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

7140

VOLTAGE

CURRENT AND DUTY

-3

FEATURES*

LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge)

FINISH

1

0

-628

3 12 Volt

1 DC Continuous or Intermittent

0 Standard/Fail-Secure

313 Dark Bronze Anodized

00 1-1/16" or less

-00 05 2"

5 24 Volt

4 AC Intermittent

5 Fail-Safe

335 Black Anodized

50 1-3/8"

07 2-1/4"

626 Satin Chrome

01 1-1/2"

09 2-1/2"

628 Clear Anodized

02 1-5/8"

12 2-7/8"

03 1-3/4" *Fail-secure can be field converted to fail-safe or vice-versa.

7160

Electric Strike MODELS & FINISHES

313, 335, 628

626

7160 For aluminum jambs

$220.00

$245.00

7160-XX7 OR -XX9 Monitoring signal switches

$320.00

$345.00

Lip Extensions up to 3” for center-hung or non-flush doors add $32.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

VOLTAGE

CURRENT AND DUTY

FEATURES*

FINISH

LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge)

7160

-3

1

0

-628

-00

3 12 Volt

1 DC Continuous or Intermittent

0 Standard/Fail-Secure

313 Dark Bronze Anodized

00 1-1/16" or less

05 2"

5 24 Volt

4 AC Intermittent

5 Fail-Safe

335 Black Anodized

01 1-1/2"

07 2-1/4"

7 Monitor/Fail-Safe

626 Satin Chrome

02 1-5/8"

09 2-1/2"

628 Clear Anodized

03 1-3/4"

12 2-7/8"

9 Monitor/Fail-Secure

*Fail-secure can be field converted to fail-safe or vice-versa.

7170

Electric Strike MODELS & FINISHES

FITS STANDARD MOUNTING TAB ANSI PREP

3/32"

2.4mm

313, 335, 628

626

7170 For hollow metal and wood jambs

$220.00

$245.00

7170-XX7 OR -XX9 Monitoring signal switches

$320.00

$345.00

Lip Extensions up to 3” for center-hung or non-flush doors add $32.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

VOLTAGE

CURRENT AND DUTY

FEATURES*

FINISH

LIP EXTENSIONS (DIM. A) Door Centerline to Jamb Edge

7170

-3

1

0

-628

-00

3 12 Volt

1 DC Continuous or Intermittent

0 Standard/Fail-Secure

313 Dark Bronze Anodized

00 1-1/16" or less

05 2"

5 24 Volt

4 AC Intermittent

5 Fail-Safe

335 Black Anodized

50 1-3/8"

07 2-1/4"

7 Monitor/Fail-Safe

626 Satin Chrome

01 1-1/2"

09 2-1/2"

9 Monitor/Fail-Secure

628 Clear Anodized

02 1-5/8"

12 2-7/8"

03 1-3/4" *Fail-secure can be field converted to fail-safe or vice-versa.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ELECTRIC STRIKES

28

7100 Series

Electric Strike Components STRIKE BODY KITS 7103A-XXX

$147.00

7173A-XXX

$190.00 One strike body kit matched with one faceplate kit makes a complete electric strike.

FACEPLATE KITS & FINISHES

313,335, 628

US26D

US3

FPK00 For use with body kits: 7103A, 7173A

$30.00

$50.00

$53.00

FPK01 For use with body kit: 7103A

$30.00

FPK10 For use with body kit: 7103A

$63.00

$86.00

FPK11 For use with body kits: 7103A, 7173A

$66.00

$89.00

$50.00

$53.00

FPK30 For use with body kit: 7103A

$34.00

FPK31 For use with body kits: 7103A, 7173A

$34.00

FPK40 For use with body kit: 7103A

$30.00

FPK45 For use with body kit: 7103A, for installing electric strike in previous prep, 4901, 4501 strike cover.

$33.00

Faceplate kits contain all hardware to mount electric strike.

KITTED OPTIONS 91-0171-01 through -13 Lip extension kits for use with 7100 through 7140

$32.00

91-0171-50 Lip extension kits for use with 7100 through 7140 interior framing systems

$32.00

91-0172-01 through -13 Lip extension kits for use with 7160 and 7170

$32.00

91-0172-50 Lip extension kits for use with 7160 and 7170 interior framing systems

$32.00

7100 LIP EXTENSION LIP EXTENSION PART NUMBER

APPLICABLE ELECTRIC STRIKES

91-0171-01 through -13

7100, 7110, 7111, 7130, 7140

91-0172-01 through -13

7160, 7170

91-0173-01 through -13

7108, 7128

7100 LIP EXTENSION DIMENSIONS DASH PART NUMBER

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE

DASH PART NUMBER

DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE

DASH PART NUMBER

DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE

-00

1-1/16”

-05

2”

-10

2-5/8”

-01

1-1/2”

-06

2-1/8”

-11

2-3/4”

-02

1-5/8”

-07

2-1/4”

-12

2-7/8”

-03

1-3/4”

-08

2-3/8”

-13

3”

-04

1-7/8”

-09

2-1/2”

ELECTRIC STRIKES

7240 Series

29

Fire-Rated Electric Strikes MODELS & FINISH

630

7240 Fire-rated, for cylindrical latches

$330.00

7240-50 Lip extension for interior frame systems

$366.00

7240-XX9 Monitoring signal switches

$430.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

VOLTAGE

CURRENT AND DUTY

FEATURES

FINISH

LIP EXTENSIONS (DIM. A) Door Centerline to Jam Edge for Interior Frames

7240

-3

1

0

-630

-50

3 12 Volt

1 DC Continuous or Intermittent

0 Fail-Secure*

5 24 Volt

4 AC Intermittent

9 Monitor/Fail-Secure

630 Satin Stainless

00 1-1/16" or less 50 1-3/8" *Not available fail-safe.

7270 Series

Fire-Rated Electric Strikes MODELS & FINISH

630

7270 Fire-rated, for mortise latches

$382.00

7270-50 Lip extension for interior frame systems

$418.00

7270-XX9 Monitoring signal switches

$482.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

7270

VOLTAGE

-3

CURRENT AND DUTY

1

FEATURES

0

3 12 Volt

1 DC Continuous or Intermittent

0 Fail-Secure*

5 24 Volt

4 AC Intermittent

9 Monitor/Fail-Secure

FINISH

LIP EXTENSIONS (DIM. A) Door Centerline to Jam Edge for Interior Frames

-630 630 Satin Stainless

-50 00 1-1/16" or less 50 1-3/8" *Not available fail-safe.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044 ARM-014-01/14

www.adamsrite.com

ELECTRIC STRIKES

30

7400, 7401

Ultraline Electric Strikes MODELS & FINISHES

313, 335, 628

630

606

605, 629

7400 For radius jambs

$241.00

$266.00

$271.00

$275.00

7400-M Monitoring signal switches

$341.00

$366.00

$371.00

$375.00

119, 121, 130

7401 For radius aluminum stiles

$241.00

7401-M Monitoring signal switches

$341.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE SHAPE

FEATURES

FINISH

740

0

M

628

0 Flat

- None

1 Radius

M Monitored

313 Dark Bronze Anodized

7400 ONLY 628 Clear Anodized

119 To match 335 Black Anodized

7401 ONLY

A Modular Pack - Body Kit*

335 Black Anodized

629 Bright Stainless

121 To match 313 Dark Bronze Anodized

605 Bright Brass

630 Satin Stainless

130 To match 628 Clear Anodized

606 Satin Brass Fail-secure can be field converted to fail-safe or vice-versa. *Modular Packing Program - match body kit with faceplate kit to complete. Use 7400A for standard jambs and 7401A for radius stile mounting. No finish designation required.

7410, 7411

Ultraline Electric Strikes MODELS & FINISHES

313, 335, 628

630

7410 For wood jambs, 7-15/16" faceplate

$270.00

$296.00

7410-M Monitoring signal switches

$370.00

$396.00

7411 For wood jambs, 10-1/4" faceplate

$270.00

$296.00

7411-M Monitoring signal switches

$396.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE LENGTH

741

FEATURES

0

FINISH

-

628

0 7-15/16"

- None

313 Dark Bronze Anodized

628 Clear Anodized

1 10-1/4"

M Monitored

335 Black Anodized

630 Satin Stainless

Fail-secure can be field converted to fail-safe or vice-versa.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ELECTRIC STRIKES

7430, 7431

31

Ultraline Electric Strikes MODELS & FINISHES

313, 335, 628

7430 For aluminum jambs, flat faceplate

$247.00

7430-M Monitoring signal switches

$347.00

119, 121, 130

7431 For aluminum stiles, radius faceplate

$247.00

7431-M Monitoring signal switches. Not available in 119 finish.

$347.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FACEPLATE SHAPE

FEATURES

FINISH

743

0

M

628

0 Flat

- None

313 Dark Bronze Anodized

119 To match 335 Black Anodized

1 Radius

M Monitored

335 Black Anodized

121 To match 313 Dark Bronze Anodized

628 Clear Anodized

130 To match 628 Clear Anodized

Fail-secure can be field converted to fail-safe or vice-versa.

7440

Ultraline Electric Strikes MODELS & FINISHES

313, 335, 628

630

606

605, 629

7440 For steel and wood, jambs and doors

$241.00

$266.00

$271.00

$275.00

7440-M Monitoring signal switches

$341.00

$366.00

$371.00

$375.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FEATURES

FINISH

7440

M

628

- None

313 Dark Bronze Anodized

606 Satin Brass

629 Bright Stainless

M Monitored

335 Black Anodized

628 Clear Anodized

630 Satin Stainless

605 Bright Brass Fail-secure can be field converted to fail-safe or vice-versa.

74R1

Ultraline Electric Strikes MODELS & FINISHES

119, 121, 130

74R1 For use with rim type exit devices with 3/4" latchbolt

$327.00

74R1-M Monitoring signal switches

$427.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FEATURES

74R1

M

FINISH

-130

- None

119 To match 335 Black Anodized

M Monitored

121 To match 313 Dark Bronze Anodized 130 To match 628 Clear Anodized Fail-secure can be field converted to fail-safe or vice-versa.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ELECTRIC STRIKES

32

74R2

Ultraline Electric Strike MODELS & FINISHES

119, 121, 130

74R2 For use with narrow stile rim type exit devices with 1/2" latchbolt

$327.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

FINISH

74R2

-130 119 To match 335 Black Anodized 121 To match 313 Dark Bronze Anodized 130 To match 628 Clear Anodized

7400 Series

Electric Strike Components STRIKE BODY KITS 7400A Standard body, for use with faceplate kits: FPK7400, FPK7410, FPK7411, FPK7430, FPK7440, FPK7445

$218.00

7401A Radius body, for use with faceplate kits: FPK7401, FPK7431

$218.00

Match one strike body kit with one faceplate kit to make a complete electric strike.

FACEPLATE KITS & FINISHES FPK7400 For use with body kit: 7400A

313, 335, 628

630

606

605, 629

$24.00

$49.00

$50.00

$53.00

119, 121,130

FPK7401 For use with body kit: 7401A

$25.00

FPK7410 For use with body kit: 7400A

$49.00

$78.00

FPK7411 For use with body kit: 7400A

$61.00

$88.00

FPK7430 For use with body kit: 7400A

$30.00

FPK7431 For use with body kit: 7401A

$31.00

FPK7440 For use with body kit: 7400A

$24.00

FPK7445 For use with body kit:7400A

$34.00

$49.00

$50.00

$53.00

Faceplate kits contain all hardware to mount electric strike.

KITTED OPTIONS LEK7400-01 Lip extension kits for use with 7400 series electric strikes

$40.00

VA7400-16VDC 16V DC adapter kit required for all 7400 strikes when applying 16VDC

$18.00

WDC7400 Wood door cover plate for use when mounting 7400 in the inactive leaf of a wood door pair (to simplify the mortising operation)

$12.00

ELX ElectroLynx™ Adapter to connect Adams Rite products to the ElectroLynx system

$29.00

HOW TO ORDER Specify quantity and the following information. Order related products separately.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

PRODUCT NO.

LIP EXTENSIONS (distance from vertical centerline of the door in the closed position to the edge of the jamb)

LEK7400-

-00 01 1-1/2"

03 1-3/4"

05 2"

07 2-1/4"

09 2-1/2”

11 2-3/4"

13 3"

02 1-5/8"

04 1-7/8"

06 2-1/8"

08 2-3/8"

10 2-5/8"

12 2-7/8"

50 1-3/8"

TRIM

33

TRIM 1000

Series Turns MODELS & FINISHES

119, 121, 130

1000-01 OR -02 Turn for use with MS1847 deadlock

$25.00

1000-11 OR -21 Turn and escutcheon for use with MS1847 deadlock

$25.00

1004 Turn for use with 5015, 5017 deadlock

$30.00

1015 Turn for use with 5015, 5017 deadlock

$30.00

1016 Outside escutcheon

$25.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

TURN TYPE

SPINDLE LENGTH

FINISH

-21

-14

-130

TURN WITHOUT ESCUTCHEON

DASH CHART MM NO.

1000

Furnished Unassembled

-02

-01

Parallel Drive

Pendicular Drive

TURN WITH ESCUTCHEON Furnished Assembled

-11

-21

Parallel Drive

3000

Pendicular Drive

NO.

"L"

-11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21

17/32 39/64 43/64 47/64 51/64 55/64 59/64 63/64 1-3/64 1-7/64 1-11/64

13 15 17 19 20 22 23 25 26 28 30

-22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32

"L"

MM

1-15/64 1-19/64 1-23/64 1-27/64 1-31/64 1-33/64 1-39/64 1-43/64 1-47/64 1-51/64 1-55/64

31 33 35 36 38 39 41 42 44 46 47

119 To match 335 Black Anodized 121 To match 313 Dark Bronze Anodized 130 To match 628 Clear Anodized

Fixed Pull MODELS & FINISH

US32D

3001 Tubular fixed pull

$190.00

3002 Flat fixed pull

$207.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

HANDLE

CYLINDER HOLE

EXIT DEVICE

FINISH

300

1

-1

1

-US32D

1 Round

1 Without Hole

1 Mortise, Rim

2 Flat

2 With Hole

2 CVR

US32D Satin Stainless

3 SVR Not for use with the following exit devices: 8200, 8400, 8600, 8800.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

TRIM

34

3080

Series Entry Trim KEYPAD

ELECTRIFIED TRIM

MODELS & FINISHES

US32D, US10B

US4, US3, US32

US32D, US10B

US4, US3, US32

3080 Entry trim with standard series lever (01, 02, 03)

$333.00

$360.00

$650.00

$690.00

3080-M Matching trim cover finish, plated

$423.00

$450.00

$740.00

$780.00

3080-U Universal trim kit includes tailpieces and trimplates for use with all Adams Rite exit devices

$358.00

$385.00

$675.00

$715.00

3080-MX Entry trim with designer series levers (MX)

$378.00

$405.00

$695.00

$735.00

Tactile strip available on inside of standard series levers 01 and 03, add $40.

KITTED OPTIONS 91-0686 Adaptor kit for 3080 trim and G86 exit device

$27.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

ELECTRIFIED

HANDLE

HANDING

CYLINDER HOLE

EXIT DEVICE

VOLTAGE

FEATURES

TRIM COVER FINISH

FINISH

3080

E

-01

-0

-3

7

-3

0

M

US32D

STANDARD HANDLES

0 No Handing

3 With Hole

1 SVR

ELECTRIFIED TRIM ONLY

ELECTRIFIED - Standard (Black) TRIM ONLY

US3 Bright Brass

01 Curve

7 Right Hand*

9 Without Hole

3 Mortise

3 12 Volt DC

0 F ail-Secure

US4 Satin Brass

02 Round

8 Left Hand*

4 SCVR

5 24 Volt DC

5 Fail-Safe

(blank)

Standard

E Electrified Trim

03 Square DESIGNER SERIES MD

MJ

ME

MN* (Handed)

MG

MV* (Handed)

MI

MW

MM  atching Finish

US10B Oil-Rubbed Bronze

6 CVR

US32 Bright Stainless

7 Rim

US32D Satin Stainless

U Universal Kit

*Handing must be specified for MN and MV Designer Handles.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

TRIM

3090, 3090P/C

35

eForce® Keyless Entry MODELS & FINISHES For Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin Russwin ED4000 series exit devices only

KEYPAD

PROX

ICLASS

626, 121

626, 121

626, 121

3090-01

3090P-01

3090C-01

$632.00

$878.00

$915.00

3090-02

3090P-02

3090C-02

$652.00

$898.00

$935.00

For Adams Rite MS ® deadlocks

Kitted Options MODELS RSK-3090 Remote switch input connector

$14.00

3090-CABLE 15 ft cable extension (ElectroLynx™ x pigtail) for 3090P/C

$30.00

3090-CABLE-EL 15 ft cable extension (ElectroLynx™ x ElectroLynx™) for 3090P/C

$36.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

COMPATIBLE PRODUCTS

FINISH

-01

-626

3090

01 A dams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin

121 To match 313 Dark Bronze Anodized

02 Adams Rite MS® deadlocks

626 Satin Chrome

Russwin ED4000 series exit devices only

HOW TO ORDER Specify quantity and the following information. Order related products separately.

A100-3090H

PRODUCT NO.

CREDENTIAL

3090

P

COMPATIBLE PRODUCTS

FINISH

-01

-626

P 125 kHz HID® Prox

01 A dams Rite latches or 8000 Series Exit Devices, Yale 7200

C 13.56 MHz HID iCLASS

02 Adams Rite MS deadlocks

121 To match 313 Dark Bronze

series, Corbin Russwin ED4000 series exit devices only

Anodized

626 Satin Chrome

®

Keyless Entry and Aperio® Hub Wholesale Kit FOR DEADLATCHES

FOR DEADLOCKS

MODELS & FINISHES

121, 626

121, 626

A100-3090H-C Keyless entry paired with hub, iCLASS reader

$1,680.00

$1,700.00

A100-3090H-P Keyless entry paired with hub, PROX reader

$1,680.00

$1,700.00

Special pricing program discounts apply to Aperio products. Please contact your sales representative for pricing information.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

CREDENTIAL

A100-3090H

-C P 125 kHz HID® Prox

COMPATIBLE PRODUCTS

FINISH

-1

-626

1 A dams Rite latches or 8000 Series Exit Devices, Yale 7200

series, Corbin Russwin ED4000 series exit devices only (select REX enabled version).

C 13.56 MHz HID iCLASS 2 Adams Rite MS® deadlocks

121 To match 313 Dark Bronze Anodized 626 Satin Chrome

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044 ARM-014-01/14

www.adamsrite.com

TRIM

36

4060

Turn MODEL & FINISH

130

4060 Turn for 1875 deadlock, 1-1/2", 1-3/4", or 2" door thickness

$57.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

DOOR THICKNESS

4060

FINISH

-05 05 1-1/2”

-130 130 To match 628 Clear Anodized

06 1-3/4” 07 2” NOTE: Contact factory regarding mounting spacers, bolts, guides and strikes for a particular door design.

4550

MS® Deadlock Lever MODEL & DOOR THICKNESS 4550 Deadlock lever, 119, 121, or 130 finish

1-3/4" TO 2-1/16"

2-1/16" TO 2-3/8"

$191.00

$227.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

DOOR HAND*

4550

R

DOOR THICKNESS

RITECOAT FINISH

-01

-130

R RH or RHR

01 1-3/4" to 2"

119 To match 335 Black Anodized

L LH or LHR

02 2-1/8" to 2-3/8"

121 To match 313 Dark Bronze Anodized 130 To match 628 Clear Anodized *Regardless of swing.

4560, 4565

Series Deadlatch Handles for 4300, 4500, 4900 MODELS & FINISHES

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

119, 121, 130

4560-X01 For door thickness (01) 1-3/4" to 2"

$50.00

4560-X02 For door thickness (02) 2-1/4" to 2-1/2"

$70.00

4560-X03 For door thickness (03) 2-3/4" to 3"

$70.00

4560-X04 For door thickness (04) 3-1/4"

$70.00

4565-X01 For door thickness (01) 1-3/4" to 2"

$50.00

4565-X02 For door thickness (02) 2-1/4" to 2-1/2"

$70.00

4565-X03 For door thickness (03) 2-3/4" to 3"

$70.00

4565-X04 For door thickness (04) 3-1/4"

$70.00

TRIM

4560-010, 4565-010

37

Series Deadlatch Handles for MS+1890 MODELS & FINISHES

119, 121, 130

4560-011 For door thickness (11) 1-3/4"

$37.00

4560-012 For door thickness (12) 1-3/4" to 2-1/4"

$47.00

4560-013 For door thickness (13) 2-15/16" to 2-3/4"

$47.00

4565-011 For door thickness (11) 1-3/4"

$37.00

4565-012 For door thickness (12) 1-3/4" to 2-1/4"

$47.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

HANDLE TYPE

HANDING

DOOR THICKNESS

FINISH

456

0

-5

01

-130

For 4300, 4500, 4900 Series Deadlatches

0 Lever

0 Using MS+1890

For MS+1890

119 To match 335 Black Anodized

5 Turn

5 LH or LHR

01 1-3/4" to 2"

11 1-3/4"

121 To match 313 Dark Bronze Anodized

6 RH or RHR

02 2-1/4" to 2-1/2"

12 1-3/4" to 2-1/4"

130 To match 628 Clear Anodized

03 2-3/4" to 3"

13 2-5/16" to 2-3/4"

04 3-1/4"

4568, 4569

Eurostyle Deadlatch Handles MODELS & FINISHES

sw 4568

119, 121, 130

4568-X01 For door thickness (01) 1-3/4" to 2"

$60.00

4568-X02 For door thickness (02) 2-1/4" to 2-1/2"

$75.00

4568-X03 For door thickness (03) 2-3/4" to 3"

$75.00

4568-X04 For door thickness (04) 3-1/4"

$75.00

4569-X01 For door thickness (01) 1-3/4" to 2"

$68.00

4569-X02 For door thickness (02) 2-1/4" to 2-1/2"

$83.00

4569-X03 For door thickness (03) 2-3/4" to 3"

$83.00

4569-X04 For door thickness (04) 3-1/4"

$83.00

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

TRIM

38

4568-010, 4569-010

Series Deadlatch Handles for MS+1890 MODELS & FINISHES

119, 121, 130

4568-011 For door thickness (11) 1-3/4" to 1-15/16"

$46.00

4568-012 For door thickness (12) 2" to 2-1/4"

$51.00

4568-013 For door thickness (13) 2-15/16" to 2-3/4"

$51.00

4568-014 For door thickness (14) 3"

$51.00

4569-011 For door thickness (11) 1-3/4" to 1-15/16"

$53.00

4569-012 For door thickness (12) 2" to 2-1/4"

$58.00

4569-013 For door thickness (13) 2-15/16" to 2-3/4"

$58.00

4569-014 For door thickness (14) 3"

$58.00

HOW TO ORDER Specify quantity and the following information. Order related products separately.

4590

PRODUCT NO.

LEVER TYPE

HANDING

DOOR THICKNESS

FINISH

456

8

-5

01

-130

8 Straight

0 Using MS+1890

For 4300, 4500, 4900 Series Deadlatches

9 Return End

5 LH or LHR

01 1-3/4" to 2"

11 1-3/4" to 1-15/16"

121 To match 313 Dark Bronze Anodized

6 RH or RHR

02 2-1/4" to 2-1/2"

12 2" to 2-1/4"

130 To match 628 Clear Anodized

03 2-3/4" to 3"

13 2-5/16" to 2-3/4"

04 3-1/4"

14 3”

10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

119 To match 335 Black Anodized

Deadlatch Paddle for 4300, 4500, 4900 MODELS & FINISHES

800.872.3267 • Fax 800.232.7329

For MS+1890

313, 335, 628

4590-0X-00 For door thickness (00) 1-3/4"

$100.00

4590-0X-01 For door thickness (01) 1-13/16" to 2"

$120.00

4590-0X-02 For door thickness (02) 2-1/4" to 2-1/2"

$120.00

4590-0X-03 For door thickness (03) 2-3/4" to 3"

$120.00

4590-0X-04 For door thickness (04) 3-1/4"

$120.00

TRIM

4590-1X

39

Deadlatch Paddle for MS+1890, 2190 MODELS & FINISHES

313, 335, 628

4590-1X-00 For door thickness (00) 1-3/4"

$84.00

4590-1X-01 For door thickness (01) 1-3/4" to 2-1/4"

$102.00

4590-1X-02 For door thickness (02) 2-5/16" to 2-1/2"

$102.00

4590-1X-03 For door thickness (03) 2-9/16" to 2-3/4"

$102.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

OPERATION

DOOR THICKNESS

FINISH*

4590

02

-00

-313

FIRST DASH FOR LATCH SERIES -01 4300/4500/4900 -11 MS+1890/2190 -02 4300/4500/4900 -12 MS+1890/2190 -03 4300/4500/4900 -13 MS+1890/2190 -04 4300/4500/4900 -14 MS+1890/2190

LH

LHR

3 -03 OR -1 2 -1 -02 OR

-04 OR -1 4 -01 OR -11

OPPERATION

USE Outside of left hand reverse door or inside of right hand

PULL TO LEFT

Outside of left hand door or inside of right hand reverse

PUSH TO LEFT PULL TO RIGHT

Outside of right hand reverse door or inside or left hand

PUSH TO RIGHT

Outside of right hand door or inside of left hand reverse

RH

RHR

For 4300, 4500, 4900 Series Deadlatches

For MS+1890, 2190

313 Dark Bronze Anodized

00 1-3/4"

00 1-3/4"

335 Black Anodized

01 1 -13/16" to 2"

01 1 -3/4" to 2-1/4"

628 Clear Anodized

02 2 -1/4" to 2-1/2"

02 2 -5/16" to 2-1/2"

03 2 -3/4" to 3"

03 2 -9/16" to 2-3/4"

04 3-1/4"

-01 OR -1 1 -04 OR -1 4 2 -02 OR -1 3 -1 R -03 O *Paddle only.

4591

Deadlatch Paddle for 4300, 4500, 4900 MODELS & FINISHES

313, 335, 628

US3, US4, US26D

4591-0X-00 For door thickness (00) 1-3/4"

$118.00

$225.00

4591-0X-01 For door thickness (01) 1-13/16" to 2"

$138.00

$245.00

4591-0X-02 For door thickness (02) 2-1/4" to 2-1/2"

$138.00

$245.00

4591-0X-03 For door thickness (03) 2-3/4" to 3"

$138.00

$245.00

4591-0X-04 For door thickness (04) 3-1/4"

$138.00

$245.00

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

TRIM

40

4591-1X

Deadlatch Paddle for MS+1890, 2190 MODELS & FINISHES

313, 335, 628

US3, US4, US26D

4591-1X-00 For door thickness (00) 1-3/4"

$103.00

$210.00

4591-1X-01 For door thickness (01) 1-3/4" to 2-1/4"

$121.00

$228.00

4591-1X-02 For door thickness (02) 2-5/16" to 2-1/2"

$121.00

$228.00

4591-1X-03 For door thickness (03) 2-9/16" to 2-3/4"

$121.00

$228.00

MODELS 4591MA Active paddle, latch activator with monitor switch

Add $114.00

4591M Paddle with switch, no latch activator

Add $97.00

91-0914 Monitor switch kit for 4591, field installation

$104.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

OPTIONS**

OPERATION

DOOR THICKNESS

FINISH*

4591

M

02

-00

-313

- Standard Paddle

FIRST DASH FOR LATCH SERIES

M Paddle

w/ switch only

-01 4300/4500/4900

MA Active paddle w/ switch

-11 MS+1890/2190 -02 4300/4500/4900 -12 MS+1890/2190 -03 4300/4500/4900 -13 MS+1890/2190 -04 4300/4500/4900 -14 MS+1890/2190

OPPERATION

USE

For 4300, 4500, 4900 Series Deadlatches

For MS+1890, 2190

313 Dark Bronze

00 1-3/4"

00 1-3/4"

335 Black Anodized

01 1 -13/16" to 2"

01 1 -3/4" to 2-1/4"

628 Clear Anodized

Anodized

PULL TO LEFT

Outside of left hand reverse door or inside of right hand

PUSH TO LEFT

Outside of left hand door or inside of right hand reverse

02 2 -1/4" to 2-1/2"

02 2 -5/16" to 2-1/2"

US3 Bright Brass

03 2 -3/4" to 3"

03 2 -9/16" to 2-3/4"

US26 Bright Chrome

PULL TO RIGHT

Outside of right hand reverse door or inside or left hand

04 3-1/4"

PUSH TO RIGHT

Outside of right hand door or inside of left hand reverse

US26D Satin Chrome

*Paddle only. **M and MA options availble on push paddles only, not pull paddles.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

TRIM

41

4600 Heavy Duty Designer Deadlatch Handles LEVER OPERATOR FOR 4300, 4500, 4900 SERIES DEADLATCHES

LEVER OPERATOR FOR 2190, 2290 INTERCONNECTED DEADBOLT/DEADLATCH

US32D, US10B

US3, US4, US32

US32D, US10B

US3, US4, US32

4600 With standard series handle designation (01, 02, 03)

$122.00

$140.00

$107.00

$125.00

4600-DESIGNER HANDLE With designer series handle designation (MD through MW)

$167.00

$185.00

$152.00

$170.00

4600-REX With request to exit form 'C' switch to indicate when lever is actuated

$167.00

$185.00

$152.00

$170.00

4600-THICK DOOR For door thickness greater than 1-7/8"

$142.00

$160.00

$127.00

$145.00

MODELS & FINISHES

KITTED OPTIONS 4600-REX Request to exit kit

$35.00

DTK-4600 Fixed lever (dummy) kit

$10.00

TDK-4600-XX Thick door kit. Specify door thickness.*

$20.00

TBK-4600-XX Through-bolt mounting kit for back-to-back mounting on wood doors. Specify door thickness.*

$25.00

*(01) 1-3/4",(02) 2", (03) 2-1/4", (04) 2-1/2", (05) 2-3/4".

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

4600

REX

HANDLE

M

-01

HANDING**

-5

DOOR THICKNESS

1

COMPATIBLE PRODUCTS

FINISH

1

-32D

(blank) Standard

STANDARD HANDLES

5 LH or LHR

1 1-3/4" to 1-7/8"

1 2 190, 2290 Interconnected Deadbolt/Deadlatch

US3 Bright Brass

M REX Switch Option

01 Curve

6 RH or RHR

2 2" to 2-1/8"

2 4 300, 4500, 4900 Series Deadlatches

US4 Satin Brass

02 Round

3 2-1/4" to 2-3/8"

US10B Oil-Rubbed Bronze

03 Square

4 2-1/2" to 2-5/8"

US32 Bright Stainless

5 2-3/4" to 2-7/8"

US32D Satin Stainless

DESIGNER SERIES MD

MJ

ME

MN* (Handed)

MG

MV* (Handed)

MI

MW *MN and MV Designer Handles are not field reversible. **Assuming handle on interior of door.

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

CYLINDERS

42

CYLINDERS 4024, 4025, 4026

Cylinder Pulls MODELS & FINISHES

119, 121, 130

4024-05 Cylinder pull, Schlage keyway

$56.00

4024-06 Cylinder pull, Weiser keyway

$56.00

4025-04 Special cylinder pull for Sargent Sixline, requires pull and cylinder modification

$215.00

4025-05 Cylinder pull, Schlage keyway

$61.00

4025-06 Standard cylinder pull, Weiser keyway

$61.00

4025-06, CYL X CYL Cylinder both sides pullset, Weiser keyway

$121.00

4025-08 Special cylinder pull for Corbin 471AR, requires pull modification

$183.00

4025-09 Special cylinder pull, for Russwin AR848, requires pull modification

$183.00

4026-05 Cylinder pull for use with 5015, 5017 deadlock, Schlage keyway

$64.00

4026-06 Cylinder pull for use with 5015, 5017 deadlock, Weiser keyway

$64.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PULL TYPE

PULL NO./CYLINDER INCLUDED

4024

-05

-130

4024 Trim Plate Mounted

05 Schlage "C: Keyway

119 To match 335 Black Anodized

4025 Stile Mounted with through - screws

06 Weiser Keyway

121 To match 313 Dark Bronze Anodized

4026 For Wood Applications

4036

FINISH

130 To match 628 Clear Anodized

Mortise Cylinder MODEL & FINISHES

313, 335, 628

4036 2 keys and 1/4" ring, KD, KA2 only

$38.00

For 3300, 3600, 8300, 8400, 8600, or entry trim. Five pin. Can be installed directly in latch case of 8400, 8300, or 3300. HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

4036

LOCK TYPE

-01

10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

-01

FINISH

-628

01 F or MS Lock, 4900 Deadlatches, 2190, etc.

01 KD

313 Dark Bronze Anodized

02 For 4070 Deadlock

02 KA2

335 Black Anodized

03 For 2331 Deadlock

800.872.3267 • Fax 800.232.7329

KEY OPTIONS

628 Clear Anodized

CYLINDERS

MS4043

43

Cylinder Guard MODEL & STILE WALL, CYLINDER

1/8" STILE WALL, 5 OR 6 PIN CYLINDER

1/4" STILE WALL, 5 OR 6 PIN CYLINDER

1/8" STILE WALL, 1-5/16" TO 1-7/16" LONG CYLINDER

$34.00

$38.00

$52.00

MS4043 Cylinder guard, 119, 121, or 130 finishes

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

STILE WALL & CYLINDER

MS4043

-01 STILE WALL

4066

FINISH

-130 CYLINDER

119 To match 335 Black Anodized

00 1/8"

5 or 6 pin

121 To match 313 Dark Bronze Anodized

01 1/4"

5 or 6 pin

130 To match 628 Clear Anodized

02 1/8"

1.31” to 1.435” long

Thumbturn 130, 313, 335, 628

MODEL & FINISHES 4066 Thumbturn cylinder with 1/4" ring

$41.00

HOW TO ORDER Specify quantity and the following information. Order related products separately.

4580

PRODUCT NO.

LOCK TYPE

FINISH

4066

-01

-130

01 F or MS Lock, 4900 Deadlatches, 2190, etc

130 To match 628 Clear Anodized

02 For 4070 Deadlock

313 Dark Bronze Anodized

03 For 2331 Deadlock

335 Black Anodized

Cam Disc MODELS 4580 - X00, X01 Included with lever handles, door thickness 2" or less

$15.00

4580 - X02, X03 Included with lever handles, door thickness greater than 2"

$23.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

HANDING

4580

DOOR THICKNESS

-5

00

5 LH

00 1-3/4"

6 RH

01 2" 02 2-1/4" 03 2-3/4"

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

CYLINDERS

44

4581

Universal Cam Disc MODELS 4581-01 Universal cam disc, non-handed, for 1-3/4" door thickness (included in 4600)

$22.00

4581-02 Universal cam disc, non-handed, for 2" door thickness

$30.00

4581-03 Universal cam disc, non-handed, for 2-1/4" door thickness

$30.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

DOOR THICKNESS

4581

01 01 1-3/4" 02 2" 03 2-1/4"

8650

Cylinder Escutcheon Kit 119, 121, 130

313, 335, 628

US4, US32D

US3, US32

8650 Cylinder escutcheon kit for 3600, 8500, 8600 exit devices

$32.00

$59.00

$65.00

$76.00

8650 For wall thickness over 1/8"

$62.00

$89.00

$95.00

$106.00

MODELS & FINISHES

8736

Rim Cylinder MODEL & FINISHES

313, 335, 628

8736 Rim cylinder for use with 3100, 3700, 8100, 8200, 8700, 8800. Five pin.

$43.00

Keying Available: Keyed different, or two keyed alike (2).

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ACCESSORIES

45

ACCESSORIES 4014

Two-Point Conversion Kit MODEL 4014 Two-point conversion kit for MS1861 Bottom Rail Deadbolt

4015

$34.00

Threshold Bolt MODEL & CYLINDER HEIGHT

STANDARD

CYLINDER HEIGHT OVER 53"

$41.00

$63.00

4015-18-IB Two-point converter, threshold bolt, 603 finish, specify cylinder height, 60” maximum

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

ADD DASH NUMBER FOR "UNIVERSAL SIZE"

PACKAGING

4015

-18

-IB IB Individually Boxed If ordering in volume quantity for specific cylinder height, specify CYLINDER HEIGHT.

4016

Header Bolt MODEL 4016 Three-point converter, provides upper bolt for MS1850/1870 Deadlocks

$52.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

LOCK BACKSET

DOOR HEIGHT

4016

-30

-01

10 1-1/2"

01 7' Door

20 31/32"

02 10' Door

30 1-1/8"

4085

Header Bolt (Pairs of Doors Only) sw 4085

MODEL & DOOR HEIGHT

STANDARD

DOOR HEIGHT OVER 84"

$80.00

$100.00

4085-IB Positioner bolt and header strike, 603 finish, specify cylinder height and door height, door height 10’ maximum HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

DIMENSION 'A'

PACKAGING

4085

-02

-IB

01 30" - 52" 02 52" - 67" 03 67" - 79" 04 79" - 92"

IB Individually Boxed

EXAMPLE

Door Height 96"

Cylinder Height -

40"

A =

56"

REFERENCE:

7’ Door is 84” 8’ Door is 96” 9’ Door is 108” 10’ Door is 120”

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ACCESSORIES

46

4089

Exit Indicator MODELS & FINISHES

119, 121, 130

4089 For 1-3/4" door, includes both UBC and IBC signs

$50.00

4089-20 For 2"to 2-1/2" door, includes both UBC and IBC signs

$80.00

91-0912 Adapter plate for converting MS1850/4089. Installation to deadlatch and lever handle or paddle.

$29.00

ACCESSORIES 20-0255-IP Header sign "…During Business Hours"

$7.00

20-0256-IP IBC header sign "…Building is Occupied"

$7.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. OPTIONS

4089

-01

FINISH

-130

00 Standard 1-3/4" Door

119 To match 335 Black Anodized

01 For Inverted Lock

121 To match 313 Dark Bronze Anodized

20 For Doors up to 2-1/2"

130 To match 628 Clear Anodized Standard unit fits 1-3/4” doors.

4104

Mounting Bridges MODELS

91-0965

4104-01 Radius mounting bridge

$8.00

4104-02 Flat mounting bridge

$8.00

4104-03 LH bevel mounting bridge

$8.00

4104-04 RH bevel mounting bridge

$8.00

Universal Mounting Tab Kits for Installing MS® Locks & Latches MODELS

2190

91-0965 For flat/radius stiles

$13.00

91-0966 For beveled stiles, includes tabs for RH and LH bevel doors and mounting screws for clear and dark bronze

$13.00

Dual Force® Interconnected Deadbolt/Deadlatch Strikes MODELS & FINISHES

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

630

119, 121

2101-01 Standard flat strike with dust box

$25.00

$31.00

2101-XX Strike with extended lip, 4.5" only, flat strike. Not available in 119 finish.

$40.00

$46.00

2101-02 Standard radius strike with dust box

$25.00

$31.00

2102-01 Retrofit strike extended height 7-5/8" with dust box. Not available in 119 finish.

$36.00

$42.00

ACCESSORIES

2290

47

Dual Force® Interconnected Deadbolt/Deadlatch Strikes MODELS & FINISHES

4000 Series

630

119, 121

2206-01 Standard flat strike with dust box

$25.00

$31.00

2206-XX Strike with extended lip, specify dimension from strike centerline to frame face, to 4.5” maximum, flat strike only

$40.00

Series MS® Deadlock Strikes MODELS & FINISHES

630

313, 335, 628

US3, US26D

4000 Trim Strike

$18.00

4001 Box Strike

$18.00

$40.00

MS4002 Armored Strike

$50.00

$72.00

119, 121

626

$65.00

$59.00

4003 ANSI strike. Not available in 119 finish. 4005 Strike for 4015 Threshold Bolt

$17.00

4006 Strike for 1830 Bottom Rail Deadlock

$40.00

4170 Trim strike for 4070 Short Throw Deadbolt. Not available in 335 finish.

$46.00 $18.00

4505-01 Flat armored box strike for MS+1891 Deadlock/Deadlatch

$43.00

$50.00

4505-02 Radius armored box strike for MS+1891 Deadlock/Deadlatch

$43.00

$50.00

4505-17 and -21 Flat long lip armored box strike

$55.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. STRIKE MODEL

TRIM PLATE SHAPE

4001

-0

TRIM PLATE CORNERS

FINISH

1

1

-313

4000 Trim Strike

0 Flat

1 All Standard MS locks with 1-3/8" Bolt Throw

1 Square

313 Dark Bronze Anodized

4001 Box Strike

1 Radius

2 1850A-020 with 3/4" Bolt Throw Only

2 Round

335 Black Anodized

MS4002 Armored Strike

4800, MS4804

COMPATIBLE DEADLOCK

®

3 All MS-050 "Hookbolt" locks

628 Clear Anodized

Series Strikes MODELS & FINISHES

630

603

MS4804 Reinforcing strike and screws, two-part with reinforcement for strengthening metal jamb

$17.00

4801 Metal strike for MS1847 Deadlock

$20.00

$13.00

4802 Wood strike for MS 1847 Deadlock

$20.00

$13.00

4810 Box strike for 5017 Wood Door Deadlock/Deadlatch

$13.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

TYPE OF JAMB

DIMENSION 'A'

FINISH

PRODUCT NO.

FINISH

480

1

-02

-630

MS4804

-630

1 Metal

01 3/32"

603 Zinc Plated Steel

2 Wood

02 3/16"

630 Satin Stainless

630 Satin Stainless

03 9/32"

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ACCESSORIES

48

4901, 4902

Deadlatch Strikes MODELS & FINISHES

630

119, 121

4901-01 Flush mount strike, mortised with dust box

$14.00

$21.00

4901-02 Radius strike with dust box

$14.00

$21.00

4901-XX Extended lip strike, specify lip dim 'A', 2.5” maximum*

$30.00

$38.00

4902-01 Box strike

$14.00

$21.00

4902-02 Short type box strike, radius with dust box, mounting plate

$14.00

$21.00

4902-XX Extended lip strike, specify lip dim 'A', 2.5” maximum*

$30.00

$38.00

4506 Strike for use with 4920AN

$30.00

$38.00

*See dim. ‘A’ dash chart table below.

HOW TO ORDER Specify quantity and the following information. Order related products separately. PRODUCT NO.

STRIKE TYPE

490

1

FACEPLATE SHAPE

FINISH

-02

630

STANDARD LIP 1 Long

01 Flat

2 Short

02 Radius LONG LIP FOR CENTER HUNG DOOR

4304

119 To match 335 Black Anodized 121 To match 313 Dark Bronze Anodized 630 Satin Stainless Steel

DIM. ‘A’

LONG LIP FOR CENTER HUNG DOOR

DIM. ‘A’

03 2-1/4" Wide Jamb

1-1/8

13 3-1/2" Wide Jamb

1-3/4

05 2-1/2" Wide Jamb

1-1/4

15 3-3/4" Wide Jamb

1-7/8

07 2-3/4" Wide Jamb

1-3/8

17 4" Wide Jamb

2

09 3" Wide Jamb

1-1/2

19 4-1/4" Wide Jamb

2-1/8

11 3-1/4" Wide Jamb

1-5/8

21 4-1/2" Wide Jamb

2-1/4

Deadlatch Strike MODELS & FINISHES 4304 Surface mount strike for 4300 Electrified Deadlatch

630

119, 121

$18.00

$24.00

THICK DOOR KITS 2190, 2290

Dual Force® Interconnected Deadbolt/Deadlatch Thick Door Kit MODELS 2190-TDK-XX Thick door kit for 2190, 2290 standard exterior trim set. Specify door thickness.*

$45.00

TDK-4600-XX Thick door kit for 2190, 2290 low profile trim set. Specify door thickness.*

$18.00

*(01) 1-3/4", (02) 2", (03) 2-1/4", (04) 2-1/2", (05) 2-3/4", (06) 3", (07) 3-1/4".

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ACCESSORIES

4568, 4569

49

Eurostyle Deadlatch Handle Thick Door Kits MODELS 91-0128-02, 03, 04 Thick door kits for 4568, 4569

$15.00

26-0203-02, 03, 04 Thick door kits for 4568-11, 4569-11

$15.00

FACEPLATES MS1850S

Deadlock Faceplates MODELS & FINISHES

MS1850S, MS1950

MS1850S, MS1950

MS1850SN

313, 628

BFK-MS1850-10-313 OR -628 Blank faceplate kit, flat, 1” x 6-7/8”

$20.00

BFK-MS1850-11-313 OR -628 Blank faceplate kit, radius, 1” x 6-7/8”

$20.00

Deadlock (Long Throw) Faceplates MODELS & FINISHES

313, 335, 628

US4, US26D

US3, US26

24-0384-010 Flat faceplate

$6.00

$26.00

$29.00

24-0384-110 Radius faceplate

$6.00

$26.00

$29.00

24-0384-210 LH bevel faceplate

$6.00

$26.00

$29.00

24-0384-310 RH bevel faceplate

$6.00

$26.00

$29.00

24-0384-410 Radius with weatherstrip

$9.00

313, 335, 628

US4, US26D

US3, US26

24-0384-020 Flat faceplate

$6.00

$26.00

$29.00

24-0384-120 Radius faceplate

$6.00

$26.00

$29.00

24-0384-220 LH bevel faceplate

$6.00

$26.00

$29.00

24-0384-320 RH bevel faceplate

$6.00

$26.00

$29.00

24-0384-420 Radius with weatherstrip

$9.00

Deadlock (Hookbolt and Short Bolt) Faceplates MODELS & FINISHES

Deadlock (Long Throw) Faceplates MODELS & FINISHES

313, 335, 628

US4, US26D

US3, US26

24-0226-010 Flat faceplate

$8.00

$28.00

$31.00

24-0226-110 Radius faceplate

$8.00

$28.00

$31.00

24-0226-210 LH bevel faceplate

$8.00

$28.00

$31.00

24-0226-310 RH bevel faceplate

$8.00

$28.00

$31.00

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ACCESSORIES

50

MS1850SN

Deadlock (Hookbolt) Faceplates MODELS & FINISHES

1870

313, 335, 628

US4, US26D

US3, US26

24-0226-020 Flat faceplate

$8.00

$28.00

$31.00

24-0226-120 Radius faceplate

$8.00

$28.00

$31.00

24-0226-220 LH bevel faceplate

$8.00

$28.00

$31.00

24-0226-320 RH bevel faceplate

$8.00

$28.00

$31.00

Flushbolt Faceplates MODELS & FINISHES

MS+1890

313, 335, 628

24-0168-00 Flat faceplate

$13.00

24-0168-01 Radius faceplate

$13.00

24-0168-02 LH bevel faceplate

$13.00

24-0168-03 RH bevel faceplate

$13.00

24-0168-04 Radius with weatherstrip

$16.00

Deadlock Faceplates MODELS & FINISHES

2190

313, 335, 628

24-0270-020 Flat faceplate

$8.00

24-0270-120 Radius faceplate

$8.00

24-0270-220 LH bevel faceplate

$8.00

24-0270-320 RH bevel faceplate

$8.00

24-0270-420 Radius with weatherstrip

$11.00

Dual Force® Interconnected Deadbolt/Deadlatch Faceplates MODELS & FINISHES

313, 335, 628

91-0266-01 Flat faceplate and radius faceplate kit

2331

3300

Heavy Duty Deadbolt Faceplates MODELS & FINISHES

121

US26D

US3, US26

22-0170 Flat faceplate

$34.00

$35.00

$38.00

22-0032 Strike plate

$34.00

$35.00

$38.00

Fire-Rated Mortise Exit Device Faceplates MODEL & FINISHES 24-0015-020 Flat faceplate

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

$35.00

335, 628 $8.00

ACCESSORIES

4070

51

Short Throw Deadbolt Faceplates MODELS & FINISHES

4500

313, 335, 628

24-0136-00 Flat faceplate

$8.00

24-0136-10 Radius faceplate

$8.00

24-0136-20 LH bevel faceplate

$8.00

24-0136-30 RH bevel faceplate

$8.00

Standard Duty Deadlatch Faceplates MODELS & FINISHES

4530

313, 335, 628

24-0017-0220 Flat faceplate

$6.00

24-0017-1220 Radius faceplate

$6.00

24-0017-2220 LH bevel faceplate

$6.00

24-0017-3220 RH bevel faceplate

$6.00

24-0017-4220 Radius with weatherstrip

$9.00

Standard Duty Deadlatch Faceplates MODELS & FINISHES

4900

24-0016-020 Flat faceplate

$11.00

24-0016-120 Radius faceplate

$11.00

24-0016-220 LH bevel faceplate

$11.00

24-0016-320 RH bevel faceplate

$11.00

Heavy Duty Deadlatch Faceplates MODELS & FINISHES

4900

313, 335, 628

US4, US26D

US3, US26

24-0137-01 Flat or bevel faceplate

$6.00

$26.00

$29.00

24-0137-02 Radius faceplate

$6.00

$26.00

$29.00

24-0137-03 Radius with weatherstrip

$9.00

Heavy Duty Deadlatch Special Faceplates MODELS & FINISHES

4920, 8300

313, 335, 628

313, 628

24-0140 Radius with weatherstrip seal (1-1/8" x 6-7/8")

$14.00

24-0144-01 Flat or beveled doors (1-1/8" x 7-1/4")

$11.00

24-0144-03 Radius with weatherstrip (1-1/8" x 7-1/4")

$14.00

Faceplates MODEL & FINISHES 24-0138-01 Flat or bevel faceplate

313, 335, 628 $20.00

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ACCESSORIES

52

7100, 7160

Electric Strike Faceplates MODEL & FINISHES 24-0685-01 Round corner faceplate (1-1/4" x 4-7/8")

7101

24-0685-02 Radius faceplate (1-1/4" x 4-7/8")

22-0558 Round corner faceplate (1-7/16" x 7-15/16")

22-0557 Round corner faceplate (1-7/16" x 10-1/4")

24-0686-01 Round corner faceplate (1-1/4" x 6-7/8")

24-0686-02 Radius faceplate (1-1/4" x 6-7/8")

24-0687-01 Radius faceplate (1-1/4" x 4-7/8")

10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

652 $20.00

313, 335, 628 $14.00

313, 335, 628 $14.00

Electric Strike Faceplates MODEL & FINISHES

800.872.3267 • Fax 800.232.7329

$16.00

Electric Strike Faceplates MODEL & FINISHES

7140, 7170

652

Electric Strike Faceplates MODEL & FINISHES

7131

$9.00

Electric Strike Faceplates MODEL & FINISH

7130

313, 335, 628

Electric Strike Faceplates MODEL & FINISH

7111

$9.00

Electric Strike Faceplates MODEL & FINISHES

7110

313, 335, 628

313, 335, 628 $9.00

POWER

53

POWER PS-SE

Power Supply MODEL PS-SE Power supply for exit devices with SE latch retraction option

$588.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. POWER SUPPLY

PS

-SE SE Power Supply for exit devices w/ SE option

Kitted Option MODEL BBK-SE Add-on board to the PS-SE, must be supplied with 2 each 12V - 7AH batteries (by others)

PS-1

$202.00

Power Supply MODEL PS-1 Power supply, 12/24 VDC boxed P/S 1 amp

$292.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. POWER SUPPLY

PS

-1 1 Standard Power Supply

PS-LR

Power Supply MODEL PS-LR Power supply for exit devices with LR latch retraction option

$739.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. POWER SUPPLY

PS

-LR LR Power Supply for exit devices w/ LR option

Kitted Options MODEL BBK-LR Add-on board to the PS-LR, must be supplied with 2 each 12V - 7AH batteries (by others)

$202.00

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

POWER

54

4603, 4605, 4606

Transformer/Rectifier/Piezo Horn MODELS 4603 Rectifier

$13.00

4605 Transformer, 115 VAC to 12/24 VAC

$51.00

4606 Plug-in transformer, 115 VAC to 24 VAC only

$84.00

29-0218 Piezo electric horn

$18.00

ELX ElectroLynx(TM) Adapter to connect Adams Rite products to the ElectroLynx system

$29.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. ACCESSORY

460

3 3 Rectifier 5 Transformer 6 Transformer (plug in)

4612

Power Transfer Device MODELS 4612-1 Wire transfer, 105° swing

$158.00

4612-2 Wire transfer, 180° swing

$203.00

4612-1-SC Wire transfer, swing clear 90° swing

$272.00

HOW TO ORDER Specify quantity and the following information. Order related products separately. DOOR SWING

4612

-1 1 105° swing 1SC Swing clear, 90° 2 180° swing

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

55

800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

© 2014 Hanchett Entry Systems, Inc., an ASSA ABLOY Group company ARM-027-12/15

P 800.872.3267 • F 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

adamsrite.com