installation instructions - Adams Rite
"A"
DIMENSIONS Inches (Millimeters)
STILE PREPARATION
BACK OF STILE CL
"A"
CL
"B"
RADIUS CL
.980 24.9
.63 15.9
1.00 25.4
1.594 [40.48]
"A"
CL FLAT
.62 15.7
"A"
Flat Face Plate can be adjusted for right or left beveled edge doors. Radius Weather Strip is optional.
CL
"A"
AVAILABLE FACEPLATES
-.00
RADIUS
1.587 40.3
CL
BEVEL
RADIUS WEATHER STRIP
+.015 1.010 - .000 +0.4 25.7 0
CL 1.437 36.5
6.38 162
6.81 173
HOW BACKSET IS MEASURED 2.769 70.3
5.80 147.3
FOR OPTIMUM LOCK PERFORMANCE, THE GAP BETWEEN THE DOOR AND FRAME MUST MEET INDUSTRY STANDARDS OF AN 1/8" DOOR CL TO JAMB EDGE
CYLINDER CL
CAM TOLERANCE: ±.005 ( ±.13 )
.06 [1.5]
CYLINDER CL
1.437 [36.5] 2.769 [70.3]
CL
CL
.800 [20.32]
.182 [20.32]
.570 14.5 R.120 [3.0]
4300 SERIES ELECTRIFIED DEADLATCH 80-0180-421
Adjustable Mounting Tube Bracket may be removed for mounting on bridges, tabs, or either methods.
CL
4.635 CL 117.7
.42 10.6
R.156 [3.96] TYP.
2x #10-32 UNC-2B
INSTALLATION
5.375 136.5
Adams Rite Manufacturing Co. 260 Santa Fe Street, Pomona, CA 91767 Phone: 909-632-2300 Fax: 909-632-2369 www.adamsrite.com
6.38 162.1
+.005
6.885 -.000 [174.9] +.38
FLAT
Rev. C
ECN:11847
4581 Cam Plug Assy.
Drill and c'sk for #10-32 X 1/2" Flat Head Machine Screws
PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES
INSTALLATION INSTRUCTIONS Page 1 of 2
Appvd: MP
Date: 10/20/11
#8-32 x 5/16" Truss Head Screw
Depth Dim.
Depth Dim.
Yoke
Tube Spacer
RHR BEVEL POSITION 3/16" Hex Key
Inside Stile wall
Fig. 5
FLAT FACE PLATE NEUTRAL POSITION
Bevel Tab
Fig. 1
Mounting Plate
Fig. 3
Fig. 4 LHR BEVEL POSITION
Fig. 2 SOLENOID SPECIFICATION SOLENOID AVAILABLE VOLTAGES 12V DC CONTINUOUS DUTY, 24V DC CONTINUOUS DUTY.
RED -
BROWN
BROWN
YELLOW
YELLOW
BLUE ORANGE
Remove Bevel Tabs
12V DC
STRIKE
RADIUS WEATHERSEAL FACEPLATES ONLY
STRIKE
SOLENOID WIRING DIAGRAM
MONITORING (OPTIONAL)
4300 WIRING DIAGRAM INTERMITTENT / CONTINUOUS DUTY 12 / 24V DC 4603 2-AMP RECTIFIER
120V AC LINE VOLTAGE
MONITORED DEADLATCH CONTAINS AN INTERNALLY MOUNTED SWITCH. THIS SWITCH IS ACTIVATED WHEN THE DOOR IS IN CLOSE POSITION. ALL UNUSED LEADS FROM THE MONITOR SWITCH MUST BE INSULATED.
WHITE (+) 4300 ELECTRIFIED DEADLATCH
Common contact Normally Open contact (N.O.) Normally Closed contact (N.C.) Maximum switching current
RED 4605 / 4606 -24V AC 40 VA TRANSFORMER
BLACK (-)
BLUE
Black White Red 0.1 Amps @ 125 VAC
EXAMPLE WIRING DIAGRAM WITH N.O. MONITORING
ORANGE
Black 24V DC
Access Control System
White Red
Screwdriver
-
4300 SERIES ELECTRIFIED DEADLATCH
X
4300 MONITOR
Black = Common White = N.O. contact (Dry) Red = N.C. contact (Dry) Unused wires must be cut such that no exposed wire will touch any metallic surface
VOLTAGE ADAPTOR CABLE - EXTEND THE WIRE RUN FROM THE POWER SOURCE AND THROUGH THE STILE PREPARATION. CONNECT THE WIRE TO THE VOLTAGE ADAPTOR CABLE. - ATTACH VOLTAGE ADAPTOR CABLE TO 4300 AS SHOWN.
Fig. 6 Adams Rite Manufacturing Co. 260 Santa Fe Street, Pomona, CA 91767 Phone: 909-632-2300 Fax: 909-632-2369 www.adamsrite.com
4300 SERIES ELECTRIFIED DEADLATCH 80-0180-421 Rev. C
ECN: 11847
PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES
INSTALLATION INSTRUCTIONS Page 2 of 2
Appvd: MP
Date: 10/20/11
DIMENSIONS Inches (Millimeters)
STILE PREPARATION
BACK OF STILE CL
"A"
CL
"B"
RADIUS CL
.980 24.9
.63 15.9
1.00 25.4
1.594 [40.48]
"A"
CL FLAT
.62 15.7
"A"
Flat Face Plate can be adjusted for right or left beveled edge doors. Radius Weather Strip is optional.
CL
"A"
AVAILABLE FACEPLATES
-.00
RADIUS
1.587 40.3
CL
BEVEL
RADIUS WEATHER STRIP
+.015 1.010 - .000 +0.4 25.7 0
CL 1.437 36.5
6.38 162
6.81 173
HOW BACKSET IS MEASURED 2.769 70.3
5.80 147.3
FOR OPTIMUM LOCK PERFORMANCE, THE GAP BETWEEN THE DOOR AND FRAME MUST MEET INDUSTRY STANDARDS OF AN 1/8" DOOR CL TO JAMB EDGE
CYLINDER CL
CAM TOLERANCE: ±.005 ( ±.13 )
.06 [1.5]
CYLINDER CL
1.437 [36.5] 2.769 [70.3]
CL
CL
.800 [20.32]
.182 [20.32]
.570 14.5 R.120 [3.0]
4300 SERIES ELECTRIFIED DEADLATCH 80-0180-421
Adjustable Mounting Tube Bracket may be removed for mounting on bridges, tabs, or either methods.
CL
4.635 CL 117.7
.42 10.6
R.156 [3.96] TYP.
2x #10-32 UNC-2B
INSTALLATION
5.375 136.5
Adams Rite Manufacturing Co. 260 Santa Fe Street, Pomona, CA 91767 Phone: 909-632-2300 Fax: 909-632-2369 www.adamsrite.com
6.38 162.1
+.005
6.885 -.000 [174.9] +.38
FLAT
Rev. C
ECN:11847
4581 Cam Plug Assy.
Drill and c'sk for #10-32 X 1/2" Flat Head Machine Screws
PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES
INSTALLATION INSTRUCTIONS Page 1 of 2
Appvd: MP
Date: 10/20/11
#8-32 x 5/16" Truss Head Screw
Depth Dim.
Depth Dim.
Yoke
Tube Spacer
RHR BEVEL POSITION 3/16" Hex Key
Inside Stile wall
Fig. 5
FLAT FACE PLATE NEUTRAL POSITION
Bevel Tab
Fig. 1
Mounting Plate
Fig. 3
Fig. 4 LHR BEVEL POSITION
Fig. 2 SOLENOID SPECIFICATION SOLENOID AVAILABLE VOLTAGES 12V DC CONTINUOUS DUTY, 24V DC CONTINUOUS DUTY.
RED -
BROWN
BROWN
YELLOW
YELLOW
BLUE ORANGE
Remove Bevel Tabs
12V DC
STRIKE
RADIUS WEATHERSEAL FACEPLATES ONLY
STRIKE
SOLENOID WIRING DIAGRAM
MONITORING (OPTIONAL)
4300 WIRING DIAGRAM INTERMITTENT / CONTINUOUS DUTY 12 / 24V DC 4603 2-AMP RECTIFIER
120V AC LINE VOLTAGE
MONITORED DEADLATCH CONTAINS AN INTERNALLY MOUNTED SWITCH. THIS SWITCH IS ACTIVATED WHEN THE DOOR IS IN CLOSE POSITION. ALL UNUSED LEADS FROM THE MONITOR SWITCH MUST BE INSULATED.
WHITE (+) 4300 ELECTRIFIED DEADLATCH
Common contact Normally Open contact (N.O.) Normally Closed contact (N.C.) Maximum switching current
RED 4605 / 4606 -24V AC 40 VA TRANSFORMER
BLACK (-)
BLUE
Black White Red 0.1 Amps @ 125 VAC
EXAMPLE WIRING DIAGRAM WITH N.O. MONITORING
ORANGE
Black 24V DC
Access Control System
White Red
Screwdriver
-
4300 SERIES ELECTRIFIED DEADLATCH
X
4300 MONITOR
Black = Common White = N.O. contact (Dry) Red = N.C. contact (Dry) Unused wires must be cut such that no exposed wire will touch any metallic surface
VOLTAGE ADAPTOR CABLE - EXTEND THE WIRE RUN FROM THE POWER SOURCE AND THROUGH THE STILE PREPARATION. CONNECT THE WIRE TO THE VOLTAGE ADAPTOR CABLE. - ATTACH VOLTAGE ADAPTOR CABLE TO 4300 AS SHOWN.
Fig. 6 Adams Rite Manufacturing Co. 260 Santa Fe Street, Pomona, CA 91767 Phone: 909-632-2300 Fax: 909-632-2369 www.adamsrite.com
4300 SERIES ELECTRIFIED DEADLATCH 80-0180-421 Rev. C
ECN: 11847
PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES
INSTALLATION INSTRUCTIONS Page 2 of 2
Appvd: MP
Date: 10/20/11
