Deadlatch - Adams Rite
DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
DEADLOCKS
Operation
Dual Force® 2190 Interconnected Deadbolt/Deadlatch
STRIKES
OPTIONS
Key or thumbturn retracts or extends deadbolt or deadlatch. Inside lever retracts both when configured with interconnect feature. Outside lever retracts latch only. Latch holdback feature activated or deactivated by turning key to retract latch and sliding holdback button on faceplate down to hold and up to release.
• Standard strike furnished is the 2101-01 for flat jamb where door closes flush or nearly flush. The 2101 covers MS® Deadlock strike preparation with modification, and the 4901 Deadlatch strike directly. Also available in radius version for opposite stile pairs of doors and with extended lip strikes for special jamb conditions.
• Specify trim option, lever style, finish, and strike. Also adapts to paddle operator 4591. See 2290 for wood or steel door version for stile and rail type door construction. Note that the low profile trim (trim option 3) is recommended for in-swing door applications. Please refer to 3080 (TRIM) for full offering of designer handle sets.
Specifications
CYLINDER CAM
ELECTRIFIED TRIM OPTIONS
• The Dual Force 2190 is operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.
• Order 2190 Electrification Kit EK-2190 for adding to the clutched exterior lever. Dual voltage 12/24 VDC rated for continuous duty operation. Energizing the lever allows exterior lever to be turned to retract latch only. The electrified option is not available for low profile trim (trim option 3).
INTER-CONNECTION
ALUMINUM
ELECTRIFIED OPTION
• Field-selectable inter-connection feature allows interior trim to retract deadbolt and deadlatch. Consult local building officials for guidance in code compliance. Retrofits to existing MS1850S Deadbolt or 4500 and 4900 Deadlatch of the same backset. 1-3/4" minimum door thickness required.
GRADE 1 E82102
DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
DL-27
DIMENSIONS OF CAM TO OPERATE:
MS1850SN boxed ASSA with trim as specified, strike and machine DEADLOCK • Individually MS1861 BEST SERIES screws for mounting. Cylinders available separately. Shipping 1875 CORBIN RUSSWIN MS + 18902 lbs.DORMA weight: MS1950 FALCON 2190 KABA-ILCO 2290 MEDECO 4300 SARGENT 4510 SCHLAGE DEADLATCH 4530 WEISER SERIES 4900 4920AN YALE 8300 EXIT 8400 DEVICES 8650 1870 1870HM FLUSHBOLTS 1877 4781 3080 TRIM 3090
CYLINDER BASKET
The Dual Force 2190 Interconnected Deadbolt/Deadlatch provides access control and security for aluminum stile doors. Latch and deadbolt capabilities are combined for fast, easy, and panic-proof exiting.
• 1-1/8" or 1-1/2" only.
LATCHBOLT/DEADBOLT • Latchbolt: 5/8" throw of solid brass. Easily reversible using only a screwdriver. Deadbolt: 1" throw of stainless steel.
“Dim A” .800" ± .005" 20.3mm ± .127mm
AUXILIARY DEADLATCH PIN • Stainless steel. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
Function The Dual Force 2190 combines the access control capabilities of a latch with the security of a deadbolt. The key retracts and extends the deadbolt (and deadlatch) from either side. The exterior lever retracts the latch only, while the inside lever retracts the deadbolt and latch simultaneously for fast, easy, panic-proof exiting. Intended for out-swinging doors.
.120"R 3.0mm
.182" 4.6mm
FACEPLATES • Measures 1" x 6-7/8". Include FaceStyle faceplate system that adapts to flat, radius, or beveled door edge. Radius with weatherseal faceplate available separately.
THIS CAM AVAILABLE FROM: ADAMS RITE
1830 MS1837
STANDARD PACKAGE MS1850S ARROW
HOW TO ORDER
DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
Specify quantity and the following information. Order related products separately. PRODUCT NO.
BACKSET
STRIKE
2190
-3
1
STANDARD SERIES:
3 1-1/8" 4 1-1/2" .620" R
15.7mm
01-CURVE
02-ROUND
03-SQUARE
0 None
DIMENSIONS OF CAM TO OPERATE: FACEPLATE FINISH TRIM 4070 SERIES DEADBOLT
1
-1
2 D ark Bronze
Anodized 313
(OR MAKE FROM STANDARD CAM) 1 With Trim Set
.334" 3 Black Anodized 335 2 Radius Strike 8.5mm
2 W ith Electrified
3 Flat/Center
3 Low Profile Trim
Hung 4"
CYLINDER Hung 4-1/2" TRIM RING
TR
DOOR STILE
MD
MI B
A
MV LOCK CASE
ME
Trim options 1 and 2 are for outswing CAM doors only.
MJ MW
MG
CLUTCHED EXTERIOR TRIM SET
MN
INTERIOR PASSAGE LEVER SET 800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044 ARM-014-9/14
Trim Set
www.adamsrite.com
DOOR CENTERLINE
32D
00 No Handle
03 Bright Brass (US3) .950"
STANDARD SERIES:
04 Satin Brass (US4)
.721" R 01 Curve
10B Dark Bronze (US10B) .334"
02 Round
32 Bright Stainless (US32)
03 Square
32D Satin Stainless (US32D)
18.3mm
4 Flat/Center
DESIGNER SERIES:
01
THIS CAM AVAILABLE
ABOVE CYLINDER .850" ± .005" FROM MANUFACTURERS 21.6mm .127mm 1 ±Clear AnodizedON 628 0 None SPECIAL ORDER
1 Standard Flat
HANDLE DESIGNATION
DIMENSION TO OPE TRIM AND HANDLE FINISH 2331 DEA
24.1mm
THIS CAM A FROM ALL C MANUFAC (STANDAR
8.5mm
CYLINDER TRIM RING FOR NARROW STILES
DESIGNER SERIES: Narrow stile doors require a trim ring to fill the gap remaining between the cylinder MJ mortise cylinder is used. If the security of the shoulder and stile whenMD a standard hardened steel Adams Rite Cylinder Guard is not required, this ring may be ME MS4043 MN (Handed) simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or MG of pins. MV (Handed) cylinder make and number The specific length required can be quickly determined by the following MI formula: MW FOR MS® LOCKS:
FOR 4500 SERIES LATCHES:
TR* = A + .125 – B
TR* = A + .132 – B
*TOLERANCE: ± 1/16
“TR” is trim ring length. “A” is cylinder height (less shoulder but in “B” is one-half of door thickness.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Electrification
Accessories
Cylinders
2190 Interconnected Deadbolt/Deadlatch can be electrified in the field using the 2190 Electrification Kit (EK-2190) or it can be ordered with electrified trim (trim option 2).
Extended lip strikes.
2190 Interconnected Deadbolt/Deadlatch is operable by any standard 1-5/32” diameter mortise cylinder with MS® cam.
2190 thick door kits.
DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
DL-28
DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Dimensions
Stile Preparation FOR CLUTCHED EXTERIOR TRIM SET HOW BACKSET IS MEASURED:
1"
63/64"
25.4mm
25mm
BACKSET
CYLINDER C L
Dimensions
25mm
29mm
68.3mm
1-1/4" 31.8mm DIA.
63/64"
1-9/64"
2-11/16"
63/64"
2-11/16"
2-15/32"
25mm
68.3mm
62.7mm
1-23/64" 34.5mm
1-19/32" 40.5mm
C L
2-1/8" 54mm
1-1/2"
38.1mm
FLAT
1"
8-59/64"
25.4mm
6-21/32"
226.6mm
169.1mm
106.8mm
C L
9/64"
3.6mm
8-59/64"
226.6mm
4-13/64" 6-57/64" 175mm
RADIUS
LOW PROFILE TRIM C L
1-55/64"
1-23/64"
47.2mm
1-23/64"
BEVEL
34.5mm
173mm
3/4"
72.6mm
19.1mm
5-51/64" 147.2mm
6-7/8"
174.6mm
11/16"
BACKSET
“A”
1-1/8" 28.6mm
1-25/32" 45.2mm
1-1/2" 38.1mm
2-1/4" 57.2mm
17.5mm ARMORED FACEPLATE 1" X 6-7/8"
34.5mm
INSIDE
OUTSIDE
25.8mm
2-55/64"
6-13/16"
1-1/64"
CUTOUT SAME AS MS1850S DEADBOLT PLUS HOLES FOR HANDLE MOUNTING
INT.
INT.
3"
76.2mm
3-3/16"
2-45/64"
INT.
81mm
68.7mm
MAXIMUM GAP DOOR TO JAMB:
1/8"
3.2mm
3" EXT. 76.2mm
EXT. 2-51/64"
EXT. 3-19/64" 83.7mm
71mm
FLAT 24-0066-01 (included)
5"
4-11/32"
4-35/64"
127mm
5/8"
110.3mm
115.5mm
RADIUS 24-0066-02 (included)
15.9mm
2190 WITH 01 LEVER*
2190 WITH 02 LEVER*
2190 WITH 03 LEVER*
RADIUS W/ WEATHERSTRIP 24-0066-03
Jamb Preparation
INT.
82.6mm
3-1/4"
INT.
3-7/32" 81.8mm
3-1/8" INT. 79.4mm
3-1/4" INT. 82.6mm
EXT.
3-3/8"
3-11/32" EXT. 84.9mm
3-9/32" EXT. 83.3mm
EXT. 3-13/32"
Latch/Lock, Cylinder & Level Installation
15/64" 6mm
CL CYLINDER
85.7mm
4-5/16"
4-29/32"
2-25/32"
INT. 3-5/32"
INT.
EXT. 3-5/16"
EXT. 2-15/16"
80.2mm
70.6mm
5"
130.2mm
2190 WITH ME LEVER
2190 WITH MD LEVER
117.9mm
5-1/8"
109.5mm
124.6mm
4-41/64"
86.5mm
127mm
2190 WITH MG LEVER
2190 WITH MI LEVER
INT.
3-17/32" 89.7mm
INT.
EXT.
3-11/16"
EXT. 3-11/32"
3-3/16" 81mm
5-3/8"
136.5mm
84.1mm
74.6mm
37/64"
14.7mm
4-3/8"
1-9/64"
111.1mm
84.9mm
93.7mm
4-3/16"
106.4mm
4-1/2"
4-11/16"
114.3mm
119.1mm
29mm
2101 STRIKE (covers and previous cutout for MS® Deadbolt) Retrofits 4901 and 4501 strike preparations.
2190 WITH MJ LEVER
2190 WITH MN LEVER**
2190 WITH MV LEVER**
2190 WITH MW LEVER
* THE 2190-01, -02, AND -03 LEVER HANDLES ARE DESIGNED TO RETURN WITHIN 1/2" OF THE DOOR FACE. HANDLES IN THE DESIGNER SERIES DO NOT HAVE THIS SAME FEATURE. PLEASE VERIFY WITH LOCAL CODE REQUIREMENTS TO ENSURE COMPLIANCE. ** HANDED
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DEADLOCKS
Operation
Dual Force® 2190 Interconnected Deadbolt/Deadlatch
STRIKES
OPTIONS
Key or thumbturn retracts or extends deadbolt or deadlatch. Inside lever retracts both when configured with interconnect feature. Outside lever retracts latch only. Latch holdback feature activated or deactivated by turning key to retract latch and sliding holdback button on faceplate down to hold and up to release.
• Standard strike furnished is the 2101-01 for flat jamb where door closes flush or nearly flush. The 2101 covers MS® Deadlock strike preparation with modification, and the 4901 Deadlatch strike directly. Also available in radius version for opposite stile pairs of doors and with extended lip strikes for special jamb conditions.
• Specify trim option, lever style, finish, and strike. Also adapts to paddle operator 4591. See 2290 for wood or steel door version for stile and rail type door construction. Note that the low profile trim (trim option 3) is recommended for in-swing door applications. Please refer to 3080 (TRIM) for full offering of designer handle sets.
Specifications
CYLINDER CAM
ELECTRIFIED TRIM OPTIONS
• The Dual Force 2190 is operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.
• Order 2190 Electrification Kit EK-2190 for adding to the clutched exterior lever. Dual voltage 12/24 VDC rated for continuous duty operation. Energizing the lever allows exterior lever to be turned to retract latch only. The electrified option is not available for low profile trim (trim option 3).
INTER-CONNECTION
ALUMINUM
ELECTRIFIED OPTION
• Field-selectable inter-connection feature allows interior trim to retract deadbolt and deadlatch. Consult local building officials for guidance in code compliance. Retrofits to existing MS1850S Deadbolt or 4500 and 4900 Deadlatch of the same backset. 1-3/4" minimum door thickness required.
GRADE 1 E82102
DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
DL-27
DIMENSIONS OF CAM TO OPERATE:
MS1850SN boxed ASSA with trim as specified, strike and machine DEADLOCK • Individually MS1861 BEST SERIES screws for mounting. Cylinders available separately. Shipping 1875 CORBIN RUSSWIN MS + 18902 lbs.DORMA weight: MS1950 FALCON 2190 KABA-ILCO 2290 MEDECO 4300 SARGENT 4510 SCHLAGE DEADLATCH 4530 WEISER SERIES 4900 4920AN YALE 8300 EXIT 8400 DEVICES 8650 1870 1870HM FLUSHBOLTS 1877 4781 3080 TRIM 3090
CYLINDER BASKET
The Dual Force 2190 Interconnected Deadbolt/Deadlatch provides access control and security for aluminum stile doors. Latch and deadbolt capabilities are combined for fast, easy, and panic-proof exiting.
• 1-1/8" or 1-1/2" only.
LATCHBOLT/DEADBOLT • Latchbolt: 5/8" throw of solid brass. Easily reversible using only a screwdriver. Deadbolt: 1" throw of stainless steel.
“Dim A” .800" ± .005" 20.3mm ± .127mm
AUXILIARY DEADLATCH PIN • Stainless steel. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
Function The Dual Force 2190 combines the access control capabilities of a latch with the security of a deadbolt. The key retracts and extends the deadbolt (and deadlatch) from either side. The exterior lever retracts the latch only, while the inside lever retracts the deadbolt and latch simultaneously for fast, easy, panic-proof exiting. Intended for out-swinging doors.
.120"R 3.0mm
.182" 4.6mm
FACEPLATES • Measures 1" x 6-7/8". Include FaceStyle faceplate system that adapts to flat, radius, or beveled door edge. Radius with weatherseal faceplate available separately.
THIS CAM AVAILABLE FROM: ADAMS RITE
1830 MS1837
STANDARD PACKAGE MS1850S ARROW
HOW TO ORDER
DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
Specify quantity and the following information. Order related products separately. PRODUCT NO.
BACKSET
STRIKE
2190
-3
1
STANDARD SERIES:
3 1-1/8" 4 1-1/2" .620" R
15.7mm
01-CURVE
02-ROUND
03-SQUARE
0 None
DIMENSIONS OF CAM TO OPERATE: FACEPLATE FINISH TRIM 4070 SERIES DEADBOLT
1
-1
2 D ark Bronze
Anodized 313
(OR MAKE FROM STANDARD CAM) 1 With Trim Set
.334" 3 Black Anodized 335 2 Radius Strike 8.5mm
2 W ith Electrified
3 Flat/Center
3 Low Profile Trim
Hung 4"
CYLINDER Hung 4-1/2" TRIM RING
TR
DOOR STILE
MD
MI B
A
MV LOCK CASE
ME
Trim options 1 and 2 are for outswing CAM doors only.
MJ MW
MG
CLUTCHED EXTERIOR TRIM SET
MN
INTERIOR PASSAGE LEVER SET 800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044 ARM-014-9/14
Trim Set
www.adamsrite.com
DOOR CENTERLINE
32D
00 No Handle
03 Bright Brass (US3) .950"
STANDARD SERIES:
04 Satin Brass (US4)
.721" R 01 Curve
10B Dark Bronze (US10B) .334"
02 Round
32 Bright Stainless (US32)
03 Square
32D Satin Stainless (US32D)
18.3mm
4 Flat/Center
DESIGNER SERIES:
01
THIS CAM AVAILABLE
ABOVE CYLINDER .850" ± .005" FROM MANUFACTURERS 21.6mm .127mm 1 ±Clear AnodizedON 628 0 None SPECIAL ORDER
1 Standard Flat
HANDLE DESIGNATION
DIMENSION TO OPE TRIM AND HANDLE FINISH 2331 DEA
24.1mm
THIS CAM A FROM ALL C MANUFAC (STANDAR
8.5mm
CYLINDER TRIM RING FOR NARROW STILES
DESIGNER SERIES: Narrow stile doors require a trim ring to fill the gap remaining between the cylinder MJ mortise cylinder is used. If the security of the shoulder and stile whenMD a standard hardened steel Adams Rite Cylinder Guard is not required, this ring may be ME MS4043 MN (Handed) simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or MG of pins. MV (Handed) cylinder make and number The specific length required can be quickly determined by the following MI formula: MW FOR MS® LOCKS:
FOR 4500 SERIES LATCHES:
TR* = A + .125 – B
TR* = A + .132 – B
*TOLERANCE: ± 1/16
“TR” is trim ring length. “A” is cylinder height (less shoulder but in “B” is one-half of door thickness.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Electrification
Accessories
Cylinders
2190 Interconnected Deadbolt/Deadlatch can be electrified in the field using the 2190 Electrification Kit (EK-2190) or it can be ordered with electrified trim (trim option 2).
Extended lip strikes.
2190 Interconnected Deadbolt/Deadlatch is operable by any standard 1-5/32” diameter mortise cylinder with MS® cam.
2190 thick door kits.
DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
DL-28
DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Dimensions
Stile Preparation FOR CLUTCHED EXTERIOR TRIM SET HOW BACKSET IS MEASURED:
1"
63/64"
25.4mm
25mm
BACKSET
CYLINDER C L
Dimensions
25mm
29mm
68.3mm
1-1/4" 31.8mm DIA.
63/64"
1-9/64"
2-11/16"
63/64"
2-11/16"
2-15/32"
25mm
68.3mm
62.7mm
1-23/64" 34.5mm
1-19/32" 40.5mm
C L
2-1/8" 54mm
1-1/2"
38.1mm
FLAT
1"
8-59/64"
25.4mm
6-21/32"
226.6mm
169.1mm
106.8mm
C L
9/64"
3.6mm
8-59/64"
226.6mm
4-13/64" 6-57/64" 175mm
RADIUS
LOW PROFILE TRIM C L
1-55/64"
1-23/64"
47.2mm
1-23/64"
BEVEL
34.5mm
173mm
3/4"
72.6mm
19.1mm
5-51/64" 147.2mm
6-7/8"
174.6mm
11/16"
BACKSET
“A”
1-1/8" 28.6mm
1-25/32" 45.2mm
1-1/2" 38.1mm
2-1/4" 57.2mm
17.5mm ARMORED FACEPLATE 1" X 6-7/8"
34.5mm
INSIDE
OUTSIDE
25.8mm
2-55/64"
6-13/16"
1-1/64"
CUTOUT SAME AS MS1850S DEADBOLT PLUS HOLES FOR HANDLE MOUNTING
INT.
INT.
3"
76.2mm
3-3/16"
2-45/64"
INT.
81mm
68.7mm
MAXIMUM GAP DOOR TO JAMB:
1/8"
3.2mm
3" EXT. 76.2mm
EXT. 2-51/64"
EXT. 3-19/64" 83.7mm
71mm
FLAT 24-0066-01 (included)
5"
4-11/32"
4-35/64"
127mm
5/8"
110.3mm
115.5mm
RADIUS 24-0066-02 (included)
15.9mm
2190 WITH 01 LEVER*
2190 WITH 02 LEVER*
2190 WITH 03 LEVER*
RADIUS W/ WEATHERSTRIP 24-0066-03
Jamb Preparation
INT.
82.6mm
3-1/4"
INT.
3-7/32" 81.8mm
3-1/8" INT. 79.4mm
3-1/4" INT. 82.6mm
EXT.
3-3/8"
3-11/32" EXT. 84.9mm
3-9/32" EXT. 83.3mm
EXT. 3-13/32"
Latch/Lock, Cylinder & Level Installation
15/64" 6mm
CL CYLINDER
85.7mm
4-5/16"
4-29/32"
2-25/32"
INT. 3-5/32"
INT.
EXT. 3-5/16"
EXT. 2-15/16"
80.2mm
70.6mm
5"
130.2mm
2190 WITH ME LEVER
2190 WITH MD LEVER
117.9mm
5-1/8"
109.5mm
124.6mm
4-41/64"
86.5mm
127mm
2190 WITH MG LEVER
2190 WITH MI LEVER
INT.
3-17/32" 89.7mm
INT.
EXT.
3-11/16"
EXT. 3-11/32"
3-3/16" 81mm
5-3/8"
136.5mm
84.1mm
74.6mm
37/64"
14.7mm
4-3/8"
1-9/64"
111.1mm
84.9mm
93.7mm
4-3/16"
106.4mm
4-1/2"
4-11/16"
114.3mm
119.1mm
29mm
2101 STRIKE (covers and previous cutout for MS® Deadbolt) Retrofits 4901 and 4501 strike preparations.
2190 WITH MJ LEVER
2190 WITH MN LEVER**
2190 WITH MV LEVER**
2190 WITH MW LEVER
* THE 2190-01, -02, AND -03 LEVER HANDLES ARE DESIGNED TO RETURN WITHIN 1/2" OF THE DOOR FACE. HANDLES IN THE DESIGNER SERIES DO NOT HAVE THIS SAME FEATURE. PLEASE VERIFY WITH LOCAL CODE REQUIREMENTS TO ENSURE COMPLIANCE. ** HANDED
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
