ALN610 â Dundee - Architectural Area Lighting
TYPE ALN610 – Dundee™ •
Reflector module rotatable on 90° centers
•
Integral ballast assembly
•
Fully gasketed to keep contaminants out
•
Hinged top for easy relamping
•
Powder coat finish in 13 standard colors with a polymer primer sealer
1. LUMINAIRE
2. LAMP/BALLAST
3. COLOR
4. OPTIONS
5. MOUNTING
ALN 610
SPECIFICATIONS
1. LUMINAIRE
3. COLOR
HORIZONTAL CUTOFF – Clear acrylic lens
HOUSING Housing and ring shall be cast aluminum, certified as pure A356 alloy, free of any porosity, foreign materials or cosmetic fillers. Castings shall be of uniform wall thickness, minimum .188" with no warping or mold shifting. The ballast housing shall be a one piece, high strength casting with COLOR (Provide RAL) an integral heat sink for the ballast assembly. The CUSTOM COLOR (Provide color chip for matching) fixture top shall be attached with a stainless steel hinge and sealed with a molded silicone gasket. The top shall be secured with two captive tamper resistant screws. Luminous dome shall be molded 4. OPTIONS opal acrylic with an inner glass radiating dome. WDM (Fixture dome painted white) The lens shall be one piece clear, injection molded acrylic, sealed in the housing. All hardware shall LDL (Lightly diffused lens to conceal fixture interior) be stainless steel.
ALN 610 H2 (Type 2) ALN 610 H3 (Type 3) ALN 610 H4 (Type 4) ALN 610 H5 (Type 5)
2. LAMP/BALLAST COMPACT FLUORESCENT (120 thru 277 volt ballast) 4-pin 26, 32 or 42 watt lamp. Specify wattage. -18° C start temp. CF METAL HALIDE (120/208/240/277 volt ballast) Medium base, ED-17 lamp 50MH 70MH 100MH 150MH 175MH HIGH PRESSURE SODIUM (120/208/240/277 volt ballast) Medium base, ED-17 lamp 70HPS 100HPS 150HPS All ballasts are factory wired for 277 volts, unless specified. Lamps not included.
AWT (Arctic White) BLK (Black) MTB (Matte Black) DGN (Dark Green) DBZ (Dark Bronze) WRZ (Wheathered Bronse) BRM (Metallic Bronze) VBL (Verde Blue)
CRT (Corten) MAL (Matte Aluminum) MDG (Medium Grey) ATG (Antique Green) LGY (Light Grey) RAL/PREMIUM
5. MOUNTING WALL MOUNT WMA1M WMA1L WMA55 WMA56 WMA7 WMA9U POLE MOUNT TRA1M TRA1L TRA5U TRA6U TRA56 TRA57 SLA1 SLA1-2 SLA22U PIER MOUNT PM1
PM2
WMA57 WMA22U TRA3 TRA55 SLA8U PM3
Visit www.aal.net for Arms, Poles & Accessories Specification Guide
REFLECTOR MODULE The optical assembly shall consist of a polished specular upper reflector and a satin finished lower reflector to control glare. The reflector module shall be mounted to the fitter assembly and remain stationary when the globe is removed. ELECTRICAL Electrical components shall be mounted and wired to a mounting plate within the fixture. The ballast compartment shall be sealed with an aluminum cover. All electrical components and materials shall be U.L. recognized. Ballasts are high power factor rated for -30°C starting. Medium base porcelain sockets are 4KV rated. MOUNTING Fixture slips over a 4"/100mm O.D. pole for post top mounting. FINISH Fixture finish consists of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
See next page
JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15
NOTES
| 1 |
FILENAME: ALN-610-H3-150HPS.IES IESNA:LM-63-2002 [TEST] LRL 894-6H [TESTLAB] LRL [MANUFAC] ARCHITECTURAL AREA LIGHTING TYPE [LUMCAT] ALN-610-H3-150HPS [LUMINAIRE] DUNDEE SERIES, FULL CUTOFF OPTICAL [MORE] SYSTEM, CLEAR DROP GLASS LENS, [MORE] HORIZONTAL LAMP, CAST ALUMINUM [MORE] HOUSING, SUPER TGIC POLYESTER POWDER COAT DIMENSIONS [MORE] FINISH. ALL FASTENERS AND HARDWARE STAINLESS STEEL [LAMPCAT] LU150/MED [LAMP] ONE 150W ED17 MED BASE CLEAR HPS LAMP [MORE] LUMENS=16000
ALN610 – Dundee™
CERTIFICATION The fixture is listed with UL for outdoor, wet location use. UL1598. SUMMARY DATA
EFFICIENCY (Total):
74.6 % 74.6 % / 0.0 % 48.2 % / 26.4 % TYPE III, SHORT FULL CUTOFF 16000 1 CIRCULAR 1.58 (Feet) 189
WARRANTY / TERMS AND CONDITIONSEFFICIENCY OF SALE (Down / Up): EFFICIENCY (Street / House): Download: ROADWAY CLASSIFICATION: CUTOFF CLASSIFICATION: http://www.hubbelllighting.com/resources/warranty/ LUMENS/LAMP: NO. OF LAMPS: AAL reserves the right to change product specifications LUMINOUS without noticeOPENING: . Diameter: INPUT WATTS:
Photometric Report Wednesday, July 18, 2012
CATALOG NUMBER: ALN-610-H5-150HPS FILENAME: ALN-610-H5-150HPS.IES IESNA:LM-63-2002 [TEST] LRL 894-6J [TESTLAB] LRL ALN 610 [MANUFAC] ARCHITECTURAL AREA LIGHTING [LUMCAT] ALN-610-H5-150HPS 17" DIA x 40" H [LUMINAIRE] DUNDEE SERIES, FULL CUTOFF OPTICAL [MORE] SYSTEM, CLEAR DROP GLASS LENS, [MORE] HORIZONTAL LAMP, CAST ALUMINUM [MORE] HOUSING, SUPER TGIC POLYESTER POWDER COAT [MORE] FINISH. ALL FASTENERS AND HARDWARE STAINLESS STEEL [LAMPCAT] LU150/MED [LAMP] ONE 150W ED17 MED BASE CLEAR HPS LAMP ISO-ILLUMINANCE DIAGRAM (fc) [MORE] LUMENS=16000
ALN610 H3 150HPS
SUMMARY DATA
WATTAGE: 189
LUMEN OUTPUT: 11886
EFFICACY: 62.9 Lm/W Mounting
UPLIGHT Height0% Multiplier DOWNLIGHT ----------- 74.3% --------------
B3 U0 G3
EFFICIENCY (Total): 76.2 % FORWARD LIGHT LUMEN EFFICIENCY (Down / Up): 76.2 % / 0.0 % o EFFICIENCY (Street / House): FL 3036.7 %7.9% / 39.5 % 934 o ROADWAY CLASSIFICATION: FM 60TYPE III, SHORT 30.7% 3651 CUTOFF CLASSIFICATION: FULL CUTOFF o FH 8016000 25.9% 3075 LUMENS/LAMP: 0.2% 23 NO. OF LAMPS: FVH 901o LUMINOUS OPENING: CIRCULAR BACK LIGHT Diameter: 1.58 (Feet) o INPUT WATTS: 6.3% BL 30189 743 o
BM 60 BH 80 o BVH 90 o
19.3% 9.6% 0.2%
2292 1139 29
UPLIGHT UL 100 o UH 180 o
0% 0%
0 0
0.2 0.01 0.02 0.1 0.51.
2.
10 15 20 25 30 35 40 45 50
0.05 5.
4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160
+ = Point of max candela 14' MOUNTING Mounting Height HEIGHT = 20 Feet. Each box represents one mounting height.
ISO-ILLUMINANCE ALN610 H5 150HPS 189 LUMEN DIAGRAM OUTPUT:(fc) 12167 EFFICACY: 64.4 Lm/W Reported data calculated from manufacturer's data file, based onWATTAGE: IESNA recommended methods.
Photometric Viewer v3.4
Mounting
B3 U0 G3
UPLIGHT Height0% Multiplier ----------- 76.0% -------------DOWNLIGHT
FORWARD LIGHT LUMEN 8.8% 1077 FL 30 o o 26.2% 3188 FM 60 FH 80 o 12.9% 1568 0.2% 26 FVH 90 o BACK LIGHT BL 30 o BM 60 o BH 80 o BVH 90 o
8.8% 26.2% 16.7% 0.2%
1072 3183 2027 24
UPLIGHT UL 100 o UH 180 o
0% 0%
0 0
0.2 0.5 0.1
1. 2.
10 15 20 25 30 35 40 45 50
5.
0.01
0.05 + = Point of max candela 0.02 14' MOUNTING Mounting HeightHEIGHT = 20 Feet. Each box represents one mounting height.
IES files can be found at www.aal.net
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15
4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160
| 2 |
Reflector module rotatable on 90° centers
•
Integral ballast assembly
•
Fully gasketed to keep contaminants out
•
Hinged top for easy relamping
•
Powder coat finish in 13 standard colors with a polymer primer sealer
1. LUMINAIRE
2. LAMP/BALLAST
3. COLOR
4. OPTIONS
5. MOUNTING
ALN 610
SPECIFICATIONS
1. LUMINAIRE
3. COLOR
HORIZONTAL CUTOFF – Clear acrylic lens
HOUSING Housing and ring shall be cast aluminum, certified as pure A356 alloy, free of any porosity, foreign materials or cosmetic fillers. Castings shall be of uniform wall thickness, minimum .188" with no warping or mold shifting. The ballast housing shall be a one piece, high strength casting with COLOR (Provide RAL) an integral heat sink for the ballast assembly. The CUSTOM COLOR (Provide color chip for matching) fixture top shall be attached with a stainless steel hinge and sealed with a molded silicone gasket. The top shall be secured with two captive tamper resistant screws. Luminous dome shall be molded 4. OPTIONS opal acrylic with an inner glass radiating dome. WDM (Fixture dome painted white) The lens shall be one piece clear, injection molded acrylic, sealed in the housing. All hardware shall LDL (Lightly diffused lens to conceal fixture interior) be stainless steel.
ALN 610 H2 (Type 2) ALN 610 H3 (Type 3) ALN 610 H4 (Type 4) ALN 610 H5 (Type 5)
2. LAMP/BALLAST COMPACT FLUORESCENT (120 thru 277 volt ballast) 4-pin 26, 32 or 42 watt lamp. Specify wattage. -18° C start temp. CF METAL HALIDE (120/208/240/277 volt ballast) Medium base, ED-17 lamp 50MH 70MH 100MH 150MH 175MH HIGH PRESSURE SODIUM (120/208/240/277 volt ballast) Medium base, ED-17 lamp 70HPS 100HPS 150HPS All ballasts are factory wired for 277 volts, unless specified. Lamps not included.
AWT (Arctic White) BLK (Black) MTB (Matte Black) DGN (Dark Green) DBZ (Dark Bronze) WRZ (Wheathered Bronse) BRM (Metallic Bronze) VBL (Verde Blue)
CRT (Corten) MAL (Matte Aluminum) MDG (Medium Grey) ATG (Antique Green) LGY (Light Grey) RAL/PREMIUM
5. MOUNTING WALL MOUNT WMA1M WMA1L WMA55 WMA56 WMA7 WMA9U POLE MOUNT TRA1M TRA1L TRA5U TRA6U TRA56 TRA57 SLA1 SLA1-2 SLA22U PIER MOUNT PM1
PM2
WMA57 WMA22U TRA3 TRA55 SLA8U PM3
Visit www.aal.net for Arms, Poles & Accessories Specification Guide
REFLECTOR MODULE The optical assembly shall consist of a polished specular upper reflector and a satin finished lower reflector to control glare. The reflector module shall be mounted to the fitter assembly and remain stationary when the globe is removed. ELECTRICAL Electrical components shall be mounted and wired to a mounting plate within the fixture. The ballast compartment shall be sealed with an aluminum cover. All electrical components and materials shall be U.L. recognized. Ballasts are high power factor rated for -30°C starting. Medium base porcelain sockets are 4KV rated. MOUNTING Fixture slips over a 4"/100mm O.D. pole for post top mounting. FINISH Fixture finish consists of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
See next page
JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15
NOTES
| 1 |
FILENAME: ALN-610-H3-150HPS.IES IESNA:LM-63-2002 [TEST] LRL 894-6H [TESTLAB] LRL [MANUFAC] ARCHITECTURAL AREA LIGHTING TYPE [LUMCAT] ALN-610-H3-150HPS [LUMINAIRE] DUNDEE SERIES, FULL CUTOFF OPTICAL [MORE] SYSTEM, CLEAR DROP GLASS LENS, [MORE] HORIZONTAL LAMP, CAST ALUMINUM [MORE] HOUSING, SUPER TGIC POLYESTER POWDER COAT DIMENSIONS [MORE] FINISH. ALL FASTENERS AND HARDWARE STAINLESS STEEL [LAMPCAT] LU150/MED [LAMP] ONE 150W ED17 MED BASE CLEAR HPS LAMP [MORE] LUMENS=16000
ALN610 – Dundee™
CERTIFICATION The fixture is listed with UL for outdoor, wet location use. UL1598. SUMMARY DATA
EFFICIENCY (Total):
74.6 % 74.6 % / 0.0 % 48.2 % / 26.4 % TYPE III, SHORT FULL CUTOFF 16000 1 CIRCULAR 1.58 (Feet) 189
WARRANTY / TERMS AND CONDITIONSEFFICIENCY OF SALE (Down / Up): EFFICIENCY (Street / House): Download: ROADWAY CLASSIFICATION: CUTOFF CLASSIFICATION: http://www.hubbelllighting.com/resources/warranty/ LUMENS/LAMP: NO. OF LAMPS: AAL reserves the right to change product specifications LUMINOUS without noticeOPENING: . Diameter: INPUT WATTS:
Photometric Report Wednesday, July 18, 2012
CATALOG NUMBER: ALN-610-H5-150HPS FILENAME: ALN-610-H5-150HPS.IES IESNA:LM-63-2002 [TEST] LRL 894-6J [TESTLAB] LRL ALN 610 [MANUFAC] ARCHITECTURAL AREA LIGHTING [LUMCAT] ALN-610-H5-150HPS 17" DIA x 40" H [LUMINAIRE] DUNDEE SERIES, FULL CUTOFF OPTICAL [MORE] SYSTEM, CLEAR DROP GLASS LENS, [MORE] HORIZONTAL LAMP, CAST ALUMINUM [MORE] HOUSING, SUPER TGIC POLYESTER POWDER COAT [MORE] FINISH. ALL FASTENERS AND HARDWARE STAINLESS STEEL [LAMPCAT] LU150/MED [LAMP] ONE 150W ED17 MED BASE CLEAR HPS LAMP ISO-ILLUMINANCE DIAGRAM (fc) [MORE] LUMENS=16000
ALN610 H3 150HPS
SUMMARY DATA
WATTAGE: 189
LUMEN OUTPUT: 11886
EFFICACY: 62.9 Lm/W Mounting
UPLIGHT Height0% Multiplier DOWNLIGHT ----------- 74.3% --------------
B3 U0 G3
EFFICIENCY (Total): 76.2 % FORWARD LIGHT LUMEN EFFICIENCY (Down / Up): 76.2 % / 0.0 % o EFFICIENCY (Street / House): FL 3036.7 %7.9% / 39.5 % 934 o ROADWAY CLASSIFICATION: FM 60TYPE III, SHORT 30.7% 3651 CUTOFF CLASSIFICATION: FULL CUTOFF o FH 8016000 25.9% 3075 LUMENS/LAMP: 0.2% 23 NO. OF LAMPS: FVH 901o LUMINOUS OPENING: CIRCULAR BACK LIGHT Diameter: 1.58 (Feet) o INPUT WATTS: 6.3% BL 30189 743 o
BM 60 BH 80 o BVH 90 o
19.3% 9.6% 0.2%
2292 1139 29
UPLIGHT UL 100 o UH 180 o
0% 0%
0 0
0.2 0.01 0.02 0.1 0.51.
2.
10 15 20 25 30 35 40 45 50
0.05 5.
4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160
+ = Point of max candela 14' MOUNTING Mounting Height HEIGHT = 20 Feet. Each box represents one mounting height.
ISO-ILLUMINANCE ALN610 H5 150HPS 189 LUMEN DIAGRAM OUTPUT:(fc) 12167 EFFICACY: 64.4 Lm/W Reported data calculated from manufacturer's data file, based onWATTAGE: IESNA recommended methods.
Photometric Viewer v3.4
Mounting
B3 U0 G3
UPLIGHT Height0% Multiplier ----------- 76.0% -------------DOWNLIGHT
FORWARD LIGHT LUMEN 8.8% 1077 FL 30 o o 26.2% 3188 FM 60 FH 80 o 12.9% 1568 0.2% 26 FVH 90 o BACK LIGHT BL 30 o BM 60 o BH 80 o BVH 90 o
8.8% 26.2% 16.7% 0.2%
1072 3183 2027 24
UPLIGHT UL 100 o UH 180 o
0% 0%
0 0
0.2 0.5 0.1
1. 2.
10 15 20 25 30 35 40 45 50
5.
0.01
0.05 + = Point of max candela 0.02 14' MOUNTING Mounting HeightHEIGHT = 20 Feet. Each box represents one mounting height.
IES files can be found at www.aal.net
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15
4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160
| 2 |
