TN â Teneo - Architectural Area Lighting
TN – Teneo™
TYPE
•
Clean, contemporary styling that stands the test of time
•
Acrylic lens will not yellow over time
•
Ideal for way finding or general illumination
•
Features energy efficient fluorescent sources
•
Angled lens transition available
•
Available in two and four lamp arrangements
•
Wall mount version available
•
Base made of cast aluminum for corrosion resistance
•
Powder coat finish in 13 standard colors with a polymer primer sealer
1. LUMINAIRE
2. LAMP/BALLAST
3. LAMP ARRANGEMENT
4. COLOR
1. LUMINAIRE STRAIGHT ACRYLIC WHITE LENS
TN8 (8') TN12 (12')
TN10 (10') TN14 (14')
STRAIGHT POLYCARBONATE WHITE LENS TN8-P (8') TN10-P (10') TN12-P (12') TN14-P (14') WALL MOUNT WITH STRAIGHT ACRYLIC WHITE LENS TN WM (Height determined by lamp selection) WALL MOUNT WITH STRAIGHT POLYCARBONATE WHITE LENS TN WM-P (Height determined by lamp selection)
AWT (Arctic White) BLK (Black) MTB (Matte Black) DGN (Dark Green) DBZ (Dark Bronze) WRZ (Wheathered Bronse) BRM (Metallic Bronze) VBL (Verde Blue)
T8 fluorescent T8-32 (32 watts, 46" lens)
T5-14 (32 watts, 22" lens)
3. LAMP ARRANGEMENT
CRT (Corten) MAL (Matte Aluminum) MDG (Medium Grey) ATG (Antique Green) LGY (Light Grey) RAL/PREMIUM
2X (2 lamps at 180 degrees) 4X (4 lamps at 90 degrees)
TN
SPECIFICATIONS
HOUSING Teneo top, intermediate and base shall be cast aluminum. All cast aluminum components shall be certified as pure #356 alloy, free of any porosity, foreign materials, or cosmetic fillers. Teneo body shall be made from ¼" thick, 5" O.D. thick extruded aluminum. All extruded aluminum components COLOR (Provide RAL) shall be alloy 6061-T6, 6063-T5 or equal. The cap CUSTOM COLOR (Provide color chip for matching) shall be removable without tools and shall provide easy access to the optical chamber. The lens shall be one-piece acrylic or polycarbonate cylinder
ANG (Angled lens) PHC (Button-type photo cell)
FLUORESCENT (120 thru 277 volt ballast)
5. OPTIONS
5. OPTIONS
2. LAMP/BALLAST
T5 fluorescent T5-28 (28 watts, 46" lens) T5-21 (21 watts, 34" lens)
4. COLOR
ELECTRICAL The electrical assembly shall be comprised of a high power factor electronic fluorescent ballast designed to run up to four lamps. Twist-lock rotary locking sockets are utilized, however, spring (plunger) style sockets are available for highvibration application (consult factory). Ballasts are wired at the factory for 277 volts, unless specified MOUNTING Ground Mount - Teneo shall use 5/8" x 24" x 3" anchor bolts, double hex nuts and flat washers hot dipped galvanized steel. A bolt circle template shall be provided. Wall Mount - The wall plate features four 11/32" holes for 5/16" bolts. Mounting hardware not included. FINISH Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
See next page
JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | Rev 2.15
NOTES
| 1 |
TN – Teneo™
TYPE
CERTIFICATION The fixture is listed with ETL for outdoor, wet location use. Conforms to UL1598 and Canadian CSA Std., C22.2 no.9.
DIMENSIONS 10'
WARRANTY / TERMS AND CONDITIONS OF SALE Download: http://www.hubbelllighting.com/resources/warranty/
9' 8'
AAL reserves the right to change product specifications without notice.
7' 6' 5'
25.5" (T514) 35.0" (T521) 48.375" (T832/T528)
4' 3' 2' 1'
20"
10.625"/266mm TN ANG option
Wall mount Isoilluminance Diagram
CATALOG NUMBER: 505-12-4T8 FILENAME: 505-4T8.IES
TN T8
WATTAGE: 104
LUMEN OUTPUT: 8253
B2 U5 G2 FORWARD LIGHT LUMEN 1.1% FL 30 o 128 o 7.4% 888 FM 60 FH 80 o 6.4% 764 2.5% 304 FVH 90 o BACK LIGHT BL 30 o BM 60 o BH 80 o BVH 90 o
1.1% 7.4% 6.4% 2.5%
128 888 764 304
UPLIGHT UL 100 o 5.7% UH 180 o 28.3%
688 3396
0.05
UPLIGHT 49.5% Multiplier -------------1.000 DOWNLIGHT 50.5% 0.444 0.250 0.160 0.111 0.082 0.063 0.049 0.040
1. 0.5 0.1
EFFICACY: 28.8 Mounting Height ----------10 15 20 25 30 35 40 45 50
2. 0.2
0.01 0.02
Mounting Height = 10 '. Each box is one mounting height.
10' MOUNTING HEIGHT
IES files can be found at www.aal.net
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | Rev 2.15
| 2 |
TYPE
•
Clean, contemporary styling that stands the test of time
•
Acrylic lens will not yellow over time
•
Ideal for way finding or general illumination
•
Features energy efficient fluorescent sources
•
Angled lens transition available
•
Available in two and four lamp arrangements
•
Wall mount version available
•
Base made of cast aluminum for corrosion resistance
•
Powder coat finish in 13 standard colors with a polymer primer sealer
1. LUMINAIRE
2. LAMP/BALLAST
3. LAMP ARRANGEMENT
4. COLOR
1. LUMINAIRE STRAIGHT ACRYLIC WHITE LENS
TN8 (8') TN12 (12')
TN10 (10') TN14 (14')
STRAIGHT POLYCARBONATE WHITE LENS TN8-P (8') TN10-P (10') TN12-P (12') TN14-P (14') WALL MOUNT WITH STRAIGHT ACRYLIC WHITE LENS TN WM (Height determined by lamp selection) WALL MOUNT WITH STRAIGHT POLYCARBONATE WHITE LENS TN WM-P (Height determined by lamp selection)
AWT (Arctic White) BLK (Black) MTB (Matte Black) DGN (Dark Green) DBZ (Dark Bronze) WRZ (Wheathered Bronse) BRM (Metallic Bronze) VBL (Verde Blue)
T8 fluorescent T8-32 (32 watts, 46" lens)
T5-14 (32 watts, 22" lens)
3. LAMP ARRANGEMENT
CRT (Corten) MAL (Matte Aluminum) MDG (Medium Grey) ATG (Antique Green) LGY (Light Grey) RAL/PREMIUM
2X (2 lamps at 180 degrees) 4X (4 lamps at 90 degrees)
TN
SPECIFICATIONS
HOUSING Teneo top, intermediate and base shall be cast aluminum. All cast aluminum components shall be certified as pure #356 alloy, free of any porosity, foreign materials, or cosmetic fillers. Teneo body shall be made from ¼" thick, 5" O.D. thick extruded aluminum. All extruded aluminum components COLOR (Provide RAL) shall be alloy 6061-T6, 6063-T5 or equal. The cap CUSTOM COLOR (Provide color chip for matching) shall be removable without tools and shall provide easy access to the optical chamber. The lens shall be one-piece acrylic or polycarbonate cylinder
ANG (Angled lens) PHC (Button-type photo cell)
FLUORESCENT (120 thru 277 volt ballast)
5. OPTIONS
5. OPTIONS
2. LAMP/BALLAST
T5 fluorescent T5-28 (28 watts, 46" lens) T5-21 (21 watts, 34" lens)
4. COLOR
ELECTRICAL The electrical assembly shall be comprised of a high power factor electronic fluorescent ballast designed to run up to four lamps. Twist-lock rotary locking sockets are utilized, however, spring (plunger) style sockets are available for highvibration application (consult factory). Ballasts are wired at the factory for 277 volts, unless specified MOUNTING Ground Mount - Teneo shall use 5/8" x 24" x 3" anchor bolts, double hex nuts and flat washers hot dipped galvanized steel. A bolt circle template shall be provided. Wall Mount - The wall plate features four 11/32" holes for 5/16" bolts. Mounting hardware not included. FINISH Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
See next page
JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | Rev 2.15
NOTES
| 1 |
TN – Teneo™
TYPE
CERTIFICATION The fixture is listed with ETL for outdoor, wet location use. Conforms to UL1598 and Canadian CSA Std., C22.2 no.9.
DIMENSIONS 10'
WARRANTY / TERMS AND CONDITIONS OF SALE Download: http://www.hubbelllighting.com/resources/warranty/
9' 8'
AAL reserves the right to change product specifications without notice.
7' 6' 5'
25.5" (T514) 35.0" (T521) 48.375" (T832/T528)
4' 3' 2' 1'
20"
10.625"/266mm TN ANG option
Wall mount Isoilluminance Diagram
CATALOG NUMBER: 505-12-4T8 FILENAME: 505-4T8.IES
TN T8
WATTAGE: 104
LUMEN OUTPUT: 8253
B2 U5 G2 FORWARD LIGHT LUMEN 1.1% FL 30 o 128 o 7.4% 888 FM 60 FH 80 o 6.4% 764 2.5% 304 FVH 90 o BACK LIGHT BL 30 o BM 60 o BH 80 o BVH 90 o
1.1% 7.4% 6.4% 2.5%
128 888 764 304
UPLIGHT UL 100 o 5.7% UH 180 o 28.3%
688 3396
0.05
UPLIGHT 49.5% Multiplier -------------1.000 DOWNLIGHT 50.5% 0.444 0.250 0.160 0.111 0.082 0.063 0.049 0.040
1. 0.5 0.1
EFFICACY: 28.8 Mounting Height ----------10 15 20 25 30 35 40 45 50
2. 0.2
0.01 0.02
Mounting Height = 10 '. Each box is one mounting height.
10' MOUNTING HEIGHT
IES files can be found at www.aal.net
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | Rev 2.15
| 2 |
