Art Deco Fan Placemat Instructions Background Fabric Backing Fabric ...

Report 1 Downloads 70 Views
Art Deco Fan Placemat Instructions Digitized Design by Anna Aldmon

Description of Project: Placemat Finished Size: 12” x 18” 6 - Quilted Blocks (6” x 6”) •

4 - with Applique & Quilting



2 - Quilting only

Fusible ¼” Tape

Fabric Requirements

1 Placemat

6 Placemats

Background

3/4 yd

4 -1/2 yds

Backing Fabric

3/4 yd

4 -1/2 yds

Joining Strips and Binding

¼ yd

1-1/2 yds

Applique Fabric #1

1 Fat Qtr

3 Fat Qtr

Applique Fabric #2

1 Fat Qtr

3 Fat Qtr

Fleece or Embroidery Batting

1/3 yd

2 yds

Backing Fabric Background Fabric Applique Fabric 2 Applique Fabric 1

All rights reserved. No part of these electronic designs or supporting instructions may be reproduced photographically, mechanically, electronically, or reproduced for mass marketing without written permission from Anna Aldmon, excepting brief quotations in connection with reviews or promotions. Nor are the patterns on the CD to be mass produced into finished items to be sold on e-bay, at craft shows, in retail stores, or at any other venue. Quilts made for guild raffles, charity auctions, or to be entered in quilt shows are welcome with credit. The patterns on the CD are intended for your personal use. Send inquiries to Anna Aldmon, 4380 Shamrock Dr, Frisco, TX 75034 USA; 214-335-9236 or email [email protected] .

Art Deco Fan Placemat Instructions Digitized Design by Anna Aldmon

Cutting Fabric

1 Placemat

Background & Backing Fabric

From each Fabric Cut (2) 10 ½” x WOF strips; Then cut (4) 10 ½” x 10 ½” squares for 6 sqs.

Joining Strips

Cut (4) 1” x 8” Front Joining strips Cut (4) 1 3/8” x 8” Back Joining Strips Cut (1) 1” x 20 “ Front Joining Strip Cut (1) 1 3/8” x 20” Back Joining Strip

Applique Fabric #1

Cut (4) 6” squares

Applique Fabric #2

Cut (4) 6” squares

Fleece (stabilizer)

Cut (6) 1” larger than outside edge of hoop

Binding

Cut (2) 3” x WOF strips

Using embroidery machine file format and Block Instructions located on the Art Deco Fan CD, stitch out the 6 blocks for one placemat. Trim per Block Instructions. Use the “Joining the Quilted Blocks” instructions for connecting the 6 blocks together. For the Placemat, attach joining strips to both sides of the quilted block and then attach the applique blocks to either side. Remember to finish the back joining strip after pressing with either a “decorative stitch”, “stitch in the ditch” or “hand stitch”. For a consistent look, do the “decorative stitch” or “stitch in the ditch” on both sides of the joining strip. Also, remember to change the bobbin thread as needed to have nice a finish on the back side of the Placemat. Finish the Placemat with binding. Use a scant ½” seam to attach binding to front. This will match the width of the Joining Strips.

All rights reserved. No part of these electronic designs or supporting instructions may be reproduced photographically, mechanically, electronically, or reproduced for mass marketing without written permission from Anna Aldmon, excepting brief quotations in connection with reviews or promotions. Nor are the patterns on the CD to be mass produced into finished items to be sold on e-bay, at craft shows, in retail stores, or at any other venue. Quilts made for guild raffles, charity auctions, or to be entered in quilt shows are welcome with credit. The patterns on the CD are intended for your personal use. Send inquiries to Anna Aldmon, 4380 Shamrock Dr, Frisco, TX 75034 USA; 214-335-9236 or email [email protected] .