Brother PT-1010 Cutter Blade Replacement - The-Eye.eu!

Brother PT-1010 Cutter Blade Replacement

Brother PT-1010 Cutter Blade Replacement This guide shows you the process of replacing a blunt or broken cutter blade unit on your PT-1010 device.

Written By: Haley Sweet

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Brother PT-1010 Cutter Blade Replacement

Step 1 — Remove Back Cover 

Open the back cover of the device by pressing on the indication arrow and pulling it open.



Locate the yellow cutter blade unit as shown in the photo.

Step 2 — Locate Cutter Blade Unit

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Brother PT-1010 Cutter Blade Replacement

Step 3 — Remove Cutter Blade



Using your thumb and forefinger, pull up, applying a small amount of pressure until the blade loosens and comes out.

 Be very careful when pulling out the cutter blade, it is very sharp.  The Brother no. TL 5 Cutter Blade Unit is required for replacement. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-15 10:07:12 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3