Canon EOS Rebel T3i Motherboard Replacement AWS
Canon EOS Rebel T3i Motherboard Replacement
Canon EOS Rebel T3i Motherboard Replacement Replace the damaged motherboard.
撰写者: Natalie Crock
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
介绍 Replacing the motherboard is a last resort for correcting water damage to the camera. This guide will help you remove it step-by-step.
工具: Tweezers (1) Spudger (1) Phillips #000 Screwdriver (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 1 — Battery
Locate the battery compartment on the bottom of the camera.
Hook your finger onto the compartment door latch.
Open the battery compartment door.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 3
Remove the battery from the compartment.
步骤 4 — Motherboard
Peel away the rubber grip on the left side of the camera with your fingers.
The grip should feel like a thick sticker as it comes off.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 5
Remove four 3 mm Phillips #000 screws on the left side of the camera.
步骤 6
Remove four 3 mm Phillips #000 screws on the bottom of the camera.
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 7
Remove two 3 mm Phillips #000 screws on the right side of the camera.
步骤 8
Remove the back of the camera by lifting from both the left and right sides.
Be careful not to break the orange and blue cables connecting the back panel of the camera to the motherboard.
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 9
Disconnect the orange cable at the bottom of the camera by gently pinching with your fingers.
Detach the blue cable by sliding the pointed end of a spudger between the motherboard and the silver prongs connected to the cable.
步骤 10
© iFixit — CC BY-NC-SA
zh.iFixit.com
7 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 11
Locate the cable on the top left corner of the motherboard.
Pinch the round, white connector with tweezers and gently remove the cable.
步骤 12
With tweezers, pinch the ends of the remaining orange ribbon cables, and gently pull these ends off of the motherboard.
Leave the other end of all ribbon cables attached to their components.
© iFixit — CC BY-NC-SA
zh.iFixit.com
8 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 13
Remove the five 4 mm Phillips #000 screws.
Gently lift the motherboard away from the camera.
步骤 14
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-10-07 11:20:09 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
9 / 9 页
Canon EOS Rebel T3i Motherboard Replacement Replace the damaged motherboard.
撰写者: Natalie Crock
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
介绍 Replacing the motherboard is a last resort for correcting water damage to the camera. This guide will help you remove it step-by-step.
工具: Tweezers (1) Spudger (1) Phillips #000 Screwdriver (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 1 — Battery
Locate the battery compartment on the bottom of the camera.
Hook your finger onto the compartment door latch.
Open the battery compartment door.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 3
Remove the battery from the compartment.
步骤 4 — Motherboard
Peel away the rubber grip on the left side of the camera with your fingers.
The grip should feel like a thick sticker as it comes off.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 5
Remove four 3 mm Phillips #000 screws on the left side of the camera.
步骤 6
Remove four 3 mm Phillips #000 screws on the bottom of the camera.
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 7
Remove two 3 mm Phillips #000 screws on the right side of the camera.
步骤 8
Remove the back of the camera by lifting from both the left and right sides.
Be careful not to break the orange and blue cables connecting the back panel of the camera to the motherboard.
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 9
Disconnect the orange cable at the bottom of the camera by gently pinching with your fingers.
Detach the blue cable by sliding the pointed end of a spudger between the motherboard and the silver prongs connected to the cable.
步骤 10
© iFixit — CC BY-NC-SA
zh.iFixit.com
7 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 11
Locate the cable on the top left corner of the motherboard.
Pinch the round, white connector with tweezers and gently remove the cable.
步骤 12
With tweezers, pinch the ends of the remaining orange ribbon cables, and gently pull these ends off of the motherboard.
Leave the other end of all ribbon cables attached to their components.
© iFixit — CC BY-NC-SA
zh.iFixit.com
8 / 9 页
Canon EOS Rebel T3i Motherboard Replacement
步骤 13
Remove the five 4 mm Phillips #000 screws.
Gently lift the motherboard away from the camera.
步骤 14
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-10-07 11:20:09 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
9 / 9 页
