Canon EOS Rebel T3i Screen Replacement AWS

Canon EOS Rebel T3i Screen Replacement

Canon EOS Rebel T3i Screen Replacement Replacing the damaged LCD screen on the rear casing.

Rédigé par: Natalie Crock

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 6

Canon EOS Rebel T3i Screen Replacement

INTRODUCTION Use this guide to replace the LCD screen on your Canon EOS Rebel T3i.

OUTILS: Phillips #000 Screwdriver (1) Spudger (1)

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 6

Canon EOS Rebel T3i Screen Replacement

Étape 1 — Battery 

Locate the battery compartment on the bottom of the camera.



Hook your finger onto the compartment door latch.



Open the battery compartment door.

Étape 2

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 3 de 6

Canon EOS Rebel T3i Screen Replacement

Étape 3 

Remove the battery from the compartment.

Étape 4 — Screen



Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 6

Canon EOS Rebel T3i Screen Replacement

Étape 5 

Remove the plastic backing.



Unplug the blue cable from the back of the LCD.

Étape 6

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 5 de 6

Canon EOS Rebel T3i Screen Replacement

Étape 7



Remove the two 3 mm Phillips #000 screws.



Separate the LCD from the plastic housing.

To reassemble your device, follow these instructions in reverse order. Ce document a été généré pour la dernière fois le 2017-09-30 04:05:34 PM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 6 de 6