Canon EOS Rebel T3i Screen Replacement

Canon EOS Rebel T3i Screen Replacement

Canon EOS Rebel T3i Screen Replacement Replacing the damaged LCD screen on the rear casing.

Written By: Natalie Crock

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 6

Canon EOS Rebel T3i Screen Replacement

INTRODUCTION Use this guide to replace the LCD screen on your Canon EOS Rebel T3i.

TOOLS: Phillips #000 Screwdriver (1) Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 6

Canon EOS Rebel T3i Screen Replacement

Step 1 — Battery 

Locate the battery compartment on the bottom of the camera.



Hook your finger onto the compartment door latch.



Open the battery compartment door.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 6

Canon EOS Rebel T3i Screen Replacement

Step 3 

Remove the battery from the compartment.

Step 4 — Screen



Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 6

Canon EOS Rebel T3i Screen Replacement

Step 5 

Remove the plastic backing.



Unplug the blue cable from the back of the LCD.

Step 6

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 6

Canon EOS Rebel T3i Screen Replacement

Step 7



Remove the two 3 mm Phillips #000 screws.



Separate the LCD from the plastic housing.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 07:20:12 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 6