Christmas Dreams Table Runner - Quilting Treasures
Christmas Dreams Table Runner
Designed by Theresa Romeo for Quilting Treasures
SIZE 18” X 58”
quiltingtreasures.com | ©quiltingtreasures | All rights reserved.
Pg 1
FABRIC REQUIREMENTS Design 24554 K
24555 R (includes binding)
CHRISTMAS DREAMS TABLE RUNNER – Designed by Theresa Romeo for Quilting Treasures
24557 K
24556 R (backing only)
24559 R
Designer Notes • All seams are ¼" throughout. Cutting Directions Note: WOF—a widthwise cut from selvage to selvage; LOF—a lengthwise cut that is parallel to the selvage. 24554 K: Fabric A (gray poinsettia print) Runner Center • Cut (1) 8½" x LOF strip. Trim strip to measure 8½" x 48½". 24555 R: Fabric B (red snowflake print) Outer Border • Cut (4) 3" x WOF strips. Sew strips together (end to end) with 45° seams. Press seams open. Subcut (2) 3" x 53" rectangles. Subcut (2) 3" x 18" rectangles. Binding • Cut (5) 2½" x WOF strips. 24556 R: Fabric C (red poinsettia print) Backing • Cut (1) 26" x LOF strip. Trim strip to measure 26" x 66". 24557 K: Fabric D (gray scroll print) Inner Border #2 • Cut (4) 1¾" x WOF strips. Sew strips together (end to
Yardage
24554 K 1½ 24555 R* ⅞ 24556 R** 1⅞ 24557 K ¼ 24559 R ¼ Quilt batting, 26" x 66" Basic sewing and pressing supplies *includes binding **backing only
end) with 45° seams. Press seams open. Subcut (2) 1¾" x 50½" rectangles. Subcut (2) 1¾" x 13" rectangles. 24559 R: Fabric E (red swirl print) Inner Border #1 • Cut (4) 1½" x WOF strips. Sew strips together (end to end) with 45° seams. Press seams open. Subcut (2) 1½" x 48½" rectangles. Subcut (2) 1½" x 10½" rectangles. Table Runner Instructions Note: Refer to the Table Runner Layout Diagram for the following steps. 1. Inner Border #1. Sew one 1½" x 48½" Fabric E (red swirl print) rectangle to each long side of the 8½" x 48½" Fabric A (gray poinsettia print) rectangle. Sew one 1½" x 10½" Fabric E (red swirl print) rectangle to each short side of the same 8½" x 48½" Fabric A (gray poinsettia print) rectangle for the Runner Center. The Runner Center should measure 10½" x 50½". 2. Inner Border #2. Sew one 1¾" x 50½" Fabric D (gray scroll print) rectangle to each long side of the Runner Center. Sew one 1¾" x 13" Fabric D (gray scroll print) rectangle to each short side of the Runner Center. The Runner Center should measure 13" x 53".
quiltingtreasures.com | ©quiltingtreasures | All rights reserved. | Not for resale / Winter 2016
Pg 2
3. Outer Border. Sew one 3" x 53" Fabric B (red snowflake print) rectangle to each long side of the Runner Center. Sew one 3" x 18" Fabric B (red snowflake print) rectangle to each short side of the Runner Center. The Table Runner top should measure 18" x 58". Finishing 1. If not already done, prepare Fabric C (red poinsettia print) backing to measure 26" x 66". 2. Lay out the table runner top right side up on top of the batting and the wrong side of the backing fabric.
3. Baste the layers together and quilt as desired. Trim the backing and the batting even with the runner top. 4. Sew the five 2½" x WOF Fabric B (red snowflake print) strips together (end to end) with 45° seams to make a continuous strip. Fold strip in half lengthwise (with wrong sides together) and press. Bind as desired. While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the way in which individual work varies.
CHRISTMAS DREAMS TABLE RUNNER – Designed by Theresa Romeo for Quilting Treasures
Table Runner Layout Diagram
quiltingtreasures.com | ©quiltingtreasures | All rights reserved. | Not for resale / Winter 2016
Pg 3
Designed by Theresa Romeo for Quilting Treasures
SIZE 18” X 58”
quiltingtreasures.com | ©quiltingtreasures | All rights reserved.
Pg 1
FABRIC REQUIREMENTS Design 24554 K
24555 R (includes binding)
CHRISTMAS DREAMS TABLE RUNNER – Designed by Theresa Romeo for Quilting Treasures
24557 K
24556 R (backing only)
24559 R
Designer Notes • All seams are ¼" throughout. Cutting Directions Note: WOF—a widthwise cut from selvage to selvage; LOF—a lengthwise cut that is parallel to the selvage. 24554 K: Fabric A (gray poinsettia print) Runner Center • Cut (1) 8½" x LOF strip. Trim strip to measure 8½" x 48½". 24555 R: Fabric B (red snowflake print) Outer Border • Cut (4) 3" x WOF strips. Sew strips together (end to end) with 45° seams. Press seams open. Subcut (2) 3" x 53" rectangles. Subcut (2) 3" x 18" rectangles. Binding • Cut (5) 2½" x WOF strips. 24556 R: Fabric C (red poinsettia print) Backing • Cut (1) 26" x LOF strip. Trim strip to measure 26" x 66". 24557 K: Fabric D (gray scroll print) Inner Border #2 • Cut (4) 1¾" x WOF strips. Sew strips together (end to
Yardage
24554 K 1½ 24555 R* ⅞ 24556 R** 1⅞ 24557 K ¼ 24559 R ¼ Quilt batting, 26" x 66" Basic sewing and pressing supplies *includes binding **backing only
end) with 45° seams. Press seams open. Subcut (2) 1¾" x 50½" rectangles. Subcut (2) 1¾" x 13" rectangles. 24559 R: Fabric E (red swirl print) Inner Border #1 • Cut (4) 1½" x WOF strips. Sew strips together (end to end) with 45° seams. Press seams open. Subcut (2) 1½" x 48½" rectangles. Subcut (2) 1½" x 10½" rectangles. Table Runner Instructions Note: Refer to the Table Runner Layout Diagram for the following steps. 1. Inner Border #1. Sew one 1½" x 48½" Fabric E (red swirl print) rectangle to each long side of the 8½" x 48½" Fabric A (gray poinsettia print) rectangle. Sew one 1½" x 10½" Fabric E (red swirl print) rectangle to each short side of the same 8½" x 48½" Fabric A (gray poinsettia print) rectangle for the Runner Center. The Runner Center should measure 10½" x 50½". 2. Inner Border #2. Sew one 1¾" x 50½" Fabric D (gray scroll print) rectangle to each long side of the Runner Center. Sew one 1¾" x 13" Fabric D (gray scroll print) rectangle to each short side of the Runner Center. The Runner Center should measure 13" x 53".
quiltingtreasures.com | ©quiltingtreasures | All rights reserved. | Not for resale / Winter 2016
Pg 2
3. Outer Border. Sew one 3" x 53" Fabric B (red snowflake print) rectangle to each long side of the Runner Center. Sew one 3" x 18" Fabric B (red snowflake print) rectangle to each short side of the Runner Center. The Table Runner top should measure 18" x 58". Finishing 1. If not already done, prepare Fabric C (red poinsettia print) backing to measure 26" x 66". 2. Lay out the table runner top right side up on top of the batting and the wrong side of the backing fabric.
3. Baste the layers together and quilt as desired. Trim the backing and the batting even with the runner top. 4. Sew the five 2½" x WOF Fabric B (red snowflake print) strips together (end to end) with 45° seams to make a continuous strip. Fold strip in half lengthwise (with wrong sides together) and press. Bind as desired. While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the way in which individual work varies.
CHRISTMAS DREAMS TABLE RUNNER – Designed by Theresa Romeo for Quilting Treasures
Table Runner Layout Diagram
quiltingtreasures.com | ©quiltingtreasures | All rights reserved. | Not for resale / Winter 2016
Pg 3
