Cook's Corner Kitchen
Cook's Corner Kitchen Assembly Instructions
Item #3950 © 2010 Melissa & Doug, LLC All rights reserved 1011
We care about your comments Please call us! 1-800-284-3948 www.MelissaAndDoug.com
Cook's Corner Kitchen
PARTS D A E
Q
I
(2 pieces)
N R
B
(2 pieces)
F
J
S
(3 pieces)
K
O T
C
G
L H
Item #3950
M Page 2
P
(2 pieces)
U
Cook's Corner Kitchen
HARDWARE
9
10
(2 pieces)
5
3
1
(27 pieces)
(2 pieces)
7
(8 pieces)
(19 pieces)
(31 pieces) NOTE: The (5) Screw is a little shorter than the (4) Screw
2 (11 pieces)
4 (8 pieces)
6 (10 pieces)
8
11 (4 pieces)
(3 pieces)
(Note that some packages of hardware may have extra pieces)
(Items above this line are shown full size)
17 (4 pieces)
12
13 Item #3950
18
14
(4 pieces)
15 (2 pieces)
16 Page 3
20
19
HINTS and TIPS
Cook's Corner Kitchen This part is a Barrel Nut (3) It is used to join the main wood panels together with a screw. The threaded hole in it should be turned to make it easy for the screw to attach. Using a screwdriver as shown will help to turn the barrel nut so the hole is lined up with the screw.
This part is a Locknut (7) It is used in several places and should be held with the included wrench while assembling with a screwdriver as shown. When tightened properly, it will prevent the screw from loosening during play.
Item #3950
(Included Wrench)
Page 4
Lay out all the parts you will need for each step. The parts are labeled in alphabetical or numerical order by the step.
Cook's Corner Kitchen
STEP 1
A
B A
suggested assembly position
Assemble Panel (A) to Panel (B) as shown using two Screws (1) and two Barrel Nuts (3). It may be easier to start with Panel (A) on its back as shown above. Remember to line up the holes in the Barrel Nuts with the screws as explained on page 4.
3 What hardware you will need for this step:
3 (two pieces)
B
1 (two pieces) Item #3950
Assembled view
1
Page 5
Cook's Corner Kitchen
STEP 2
D
E D suggested assembly position small holes
E
small holes
What hardware you will need for this step:
3 (4 pieces)
1 (4 pieces) Item #3950
Assemble panels (D) and (E) to the parts from step 1 using four Screws (1) and four Barrel Nuts (3) as shown above. Make sure that panels (D) and (E) are facing the correct way, with the two small holes as shown. Assembled view
Page 6
Cook's Corner Kitchen
STEP 3
C F
suggested assembly position
C
F
1
3 What hardware you will need for this step:
3 (8 pieces)
1 (8 pieces)
Item #3950
Now assemble panels (C) and (F) as shown using eight screws (1) and eight barrel nuts (3). Remember to turn the barrel nuts as explained on page 4 so that the screws line up with the threaded holes. Page 7
Assembled view
Cook's Corner Kitchen
STEP 4
18
17
I
First assemble the Range Knob (17) to Panel (H) as shown here by screwing on the Plastic Nut (18) to the Range Knob. H
I
Make sure to line up the peg with the smaller hole in the panel.
Next, insert Panels (G) and (H) by slightly spreading the side panels and inserting the dowels on the panels into the holes on the side panel and the center panel.
G H
Now, lining up the Panels (I) with the slots in the sides and center panels, slide them down into place as shown.
side panel Item #3950
side panel Assembled view
Page 8
Cook's Corner Kitchen
STEP 5
Assemble Panels (J) and (K) as shown using three Screws (1) and three Barrel Nuts (3). Then assemble Panels (L) and (M) using four Screws (1) and four Barrel Nuts (3). 1
K
J
L
3
M
What hardware you will need for this step:
6
6 (4 pieces) 3 (7 pieces)
Attach two Latch Plates (9) using four Screws (6) as shown above and in the detail on the left.
1 (7 pieces) Item #3950
small holes
9
Page 9
Assembled view
Cook's Corner Kitchen
STEP 6
1 P
7
N
Assemble Handle (P) as shown to both the Oven Door (N) and Fridge Door (O) using two Screws (1) and two Nuts (7) for each Handle. Tighten using the included wrench and a screwdriver. Next, assemble the Hinges (11) as shown to each door. Make sure that the "bent" side of the Hinge is attached to the door and that it fits in the door notch properly. Use two Screws (4) and two Nuts (7) for each Hinge.
4 6
O 10
Assemble a Door Latch (10) to each door as shown using two Screws (6).
P
6
What hardware you will need for this step:
10
bent side of the hinge
6 (4 pieces)
7
1
Assembled view front side
NOTE: The small holes are only on the back of the door as shown here.
7 (12 pieces) 4
1 (4 pieces) Item #3950
4
(8 pieces)
typical Hinge assembly
7
11 Page 10
Assembled view back side
Cook's Corner Kitchen
STEP 7
N O
NOTE: The (5) screws are shorter than the (4) screws. Make sure you use the short screws for this assembly.
Attach the Fridge Door (O) and the Oven Door (N) using two Screws (5) for each Hinge as shown. The screws will thread directly into the center panel.
5
What hardware you will need for this step:
5 (8 pieces)
Item #3950
Detail view of Hinge assembly
Page 11
Assembled view
Cook's Corner Kitchen
STEP 8
Attach two Posts (R) using two Screws (2). Attach the three Range Burners (S) with a Screw (2) and a Nut (7) for each. Use the included wrench to tighten.
2 R
Assemble the Hot and Cold taps (14) with two Plastic Spacers (15) and two Screws (8).
R
13
Then attach the Faucet Base (13) with a Screw (8).
Next assemble three Range Knobs (17) using the Plastic Nut (18) as shown. The Plastic Nut screws on to the Range Knob from underneath the counter top.
S
14
S S 17 Q
8 8
What hardware you will need for this step:
15 8 2
7 18
7 (3 pieces) 8 (3 pieces) 2 (5 pieces) Item #3950
top view showing location of parts and their holes.
Page 12
Assembled view
Cook's Corner Kitchen
STEP 9
Attach the Counter Top assembly as shown using six Screws (1) and six Barrel Nuts (3).
1
Don't tighten the screws completely until all six screws have been installed, then continue to tighten all of them.
3
What hardware you will need for this step:
3 (6 pieces)
1 (6 pieces) Item #3950
Page 13
Assembled view
Cook's Corner Kitchen
STEP 10
Assemble the Timer (19) to the Shelf (U) using two Screws (2) and two Nuts (7) as shown. Don't make the screws too tight.
2 12
16
19
U
R
2 T
7
R
Then assemble the Shelf (U) to the Posts (R) using two screws (2). Make sure the recessed holes are facing up. This is the top side. Attach the Cutting Board (T) with two Screws (2) and two Nuts (7). Next, drop the Sink (16) in place as shown and attach with two Screws (6). Attach the Faucet (12) into the Base by pushing it directly down until it snaps.
2
7 Detail of Timer mounting as shown from the back
Recessed holes are face up.
Now your Cook's Corner Kitchen is ready for play.
6 7
What hardware you will need for this step:
7
(4 pieces)
2 (6 pieces) 6 (2 pieces)
Item #3950
Assembled view
Page 14
Item #3950 © 2010 Melissa & Doug, LLC All rights reserved 1011
We care about your comments Please call us! 1-800-284-3948 www.MelissaAndDoug.com
Cook's Corner Kitchen
PARTS D A E
Q
I
(2 pieces)
N R
B
(2 pieces)
F
J
S
(3 pieces)
K
O T
C
G
L H
Item #3950
M Page 2
P
(2 pieces)
U
Cook's Corner Kitchen
HARDWARE
9
10
(2 pieces)
5
3
1
(27 pieces)
(2 pieces)
7
(8 pieces)
(19 pieces)
(31 pieces) NOTE: The (5) Screw is a little shorter than the (4) Screw
2 (11 pieces)
4 (8 pieces)
6 (10 pieces)
8
11 (4 pieces)
(3 pieces)
(Note that some packages of hardware may have extra pieces)
(Items above this line are shown full size)
17 (4 pieces)
12
13 Item #3950
18
14
(4 pieces)
15 (2 pieces)
16 Page 3
20
19
HINTS and TIPS
Cook's Corner Kitchen This part is a Barrel Nut (3) It is used to join the main wood panels together with a screw. The threaded hole in it should be turned to make it easy for the screw to attach. Using a screwdriver as shown will help to turn the barrel nut so the hole is lined up with the screw.
This part is a Locknut (7) It is used in several places and should be held with the included wrench while assembling with a screwdriver as shown. When tightened properly, it will prevent the screw from loosening during play.
Item #3950
(Included Wrench)
Page 4
Lay out all the parts you will need for each step. The parts are labeled in alphabetical or numerical order by the step.
Cook's Corner Kitchen
STEP 1
A
B A
suggested assembly position
Assemble Panel (A) to Panel (B) as shown using two Screws (1) and two Barrel Nuts (3). It may be easier to start with Panel (A) on its back as shown above. Remember to line up the holes in the Barrel Nuts with the screws as explained on page 4.
3 What hardware you will need for this step:
3 (two pieces)
B
1 (two pieces) Item #3950
Assembled view
1
Page 5
Cook's Corner Kitchen
STEP 2
D
E D suggested assembly position small holes
E
small holes
What hardware you will need for this step:
3 (4 pieces)
1 (4 pieces) Item #3950
Assemble panels (D) and (E) to the parts from step 1 using four Screws (1) and four Barrel Nuts (3) as shown above. Make sure that panels (D) and (E) are facing the correct way, with the two small holes as shown. Assembled view
Page 6
Cook's Corner Kitchen
STEP 3
C F
suggested assembly position
C
F
1
3 What hardware you will need for this step:
3 (8 pieces)
1 (8 pieces)
Item #3950
Now assemble panels (C) and (F) as shown using eight screws (1) and eight barrel nuts (3). Remember to turn the barrel nuts as explained on page 4 so that the screws line up with the threaded holes. Page 7
Assembled view
Cook's Corner Kitchen
STEP 4
18
17
I
First assemble the Range Knob (17) to Panel (H) as shown here by screwing on the Plastic Nut (18) to the Range Knob. H
I
Make sure to line up the peg with the smaller hole in the panel.
Next, insert Panels (G) and (H) by slightly spreading the side panels and inserting the dowels on the panels into the holes on the side panel and the center panel.
G H
Now, lining up the Panels (I) with the slots in the sides and center panels, slide them down into place as shown.
side panel Item #3950
side panel Assembled view
Page 8
Cook's Corner Kitchen
STEP 5
Assemble Panels (J) and (K) as shown using three Screws (1) and three Barrel Nuts (3). Then assemble Panels (L) and (M) using four Screws (1) and four Barrel Nuts (3). 1
K
J
L
3
M
What hardware you will need for this step:
6
6 (4 pieces) 3 (7 pieces)
Attach two Latch Plates (9) using four Screws (6) as shown above and in the detail on the left.
1 (7 pieces) Item #3950
small holes
9
Page 9
Assembled view
Cook's Corner Kitchen
STEP 6
1 P
7
N
Assemble Handle (P) as shown to both the Oven Door (N) and Fridge Door (O) using two Screws (1) and two Nuts (7) for each Handle. Tighten using the included wrench and a screwdriver. Next, assemble the Hinges (11) as shown to each door. Make sure that the "bent" side of the Hinge is attached to the door and that it fits in the door notch properly. Use two Screws (4) and two Nuts (7) for each Hinge.
4 6
O 10
Assemble a Door Latch (10) to each door as shown using two Screws (6).
P
6
What hardware you will need for this step:
10
bent side of the hinge
6 (4 pieces)
7
1
Assembled view front side
NOTE: The small holes are only on the back of the door as shown here.
7 (12 pieces) 4
1 (4 pieces) Item #3950
4
(8 pieces)
typical Hinge assembly
7
11 Page 10
Assembled view back side
Cook's Corner Kitchen
STEP 7
N O
NOTE: The (5) screws are shorter than the (4) screws. Make sure you use the short screws for this assembly.
Attach the Fridge Door (O) and the Oven Door (N) using two Screws (5) for each Hinge as shown. The screws will thread directly into the center panel.
5
What hardware you will need for this step:
5 (8 pieces)
Item #3950
Detail view of Hinge assembly
Page 11
Assembled view
Cook's Corner Kitchen
STEP 8
Attach two Posts (R) using two Screws (2). Attach the three Range Burners (S) with a Screw (2) and a Nut (7) for each. Use the included wrench to tighten.
2 R
Assemble the Hot and Cold taps (14) with two Plastic Spacers (15) and two Screws (8).
R
13
Then attach the Faucet Base (13) with a Screw (8).
Next assemble three Range Knobs (17) using the Plastic Nut (18) as shown. The Plastic Nut screws on to the Range Knob from underneath the counter top.
S
14
S S 17 Q
8 8
What hardware you will need for this step:
15 8 2
7 18
7 (3 pieces) 8 (3 pieces) 2 (5 pieces) Item #3950
top view showing location of parts and their holes.
Page 12
Assembled view
Cook's Corner Kitchen
STEP 9
Attach the Counter Top assembly as shown using six Screws (1) and six Barrel Nuts (3).
1
Don't tighten the screws completely until all six screws have been installed, then continue to tighten all of them.
3
What hardware you will need for this step:
3 (6 pieces)
1 (6 pieces) Item #3950
Page 13
Assembled view
Cook's Corner Kitchen
STEP 10
Assemble the Timer (19) to the Shelf (U) using two Screws (2) and two Nuts (7) as shown. Don't make the screws too tight.
2 12
16
19
U
R
2 T
7
R
Then assemble the Shelf (U) to the Posts (R) using two screws (2). Make sure the recessed holes are facing up. This is the top side. Attach the Cutting Board (T) with two Screws (2) and two Nuts (7). Next, drop the Sink (16) in place as shown and attach with two Screws (6). Attach the Faucet (12) into the Base by pushing it directly down until it snaps.
2
7 Detail of Timer mounting as shown from the back
Recessed holes are face up.
Now your Cook's Corner Kitchen is ready for play.
6 7
What hardware you will need for this step:
7
(4 pieces)
2 (6 pieces) 6 (2 pieces)
Item #3950
Assembled view
Page 14
