3 Oversized Pressure ...

T R A N S M IS S ION PART S Instructions

Hyundai/Kia A6GF1, A6MF1/2, A6LF1/2/3

Oversized Pressure Regulator Valve Kit TOOL

102741-08K

R

EQ

A6MF2 Outer/Rear Valve Body

D

Part No.

UIRE

• Valve • Spring • Spacer Sleeve

Valve

Spring

Tool Kit

Spacer Sleeve

Tool Kit

Part No.

F-102741-TL8

• Reamer • Reamer Jig • Guide Pin NOTE: Sonnax “F-Tool” kits designed to service a specific bore require the VB-FIX, a self-aligning valve body reaming fixture. More information and instructions can be found online at www.sonnax.com.

1. Disassembly a. Remove OE retainer and set aside for reuse. b. Pull adjuster screw assembly straight out and set aside for reuse. NOTE: Do not turn adjuster screw.

WARNING

c. Remove and discard OE spacer sleeve, spring and pressure regulator valve. 2. Bore Reaming Ream pressure regulator bore (for reaming instructions/reamer care, please visit www.sonnax.com). Sonnax reaming tool kit F-102741-TL8 and VB-FIX are required for this operation. 3. Installation & Assembly a. Be certain all debris has been removed from valve bore and valve body. b. Install Sonnax pressure regulator valve.

16"-Hg

c. Install Sonnax spring. d. Install Sonnax spacer sleeve.

20

©2014 Sonnax Industries, Inc. 800-843-2600 • 802-463-9722 • F: 802-463-4059 • www.sonnax.com

10

5

0 30 VACUUM TEST

e. Reinstall OE adjuster screw assembly and secure with OE retainer. 4. Final Testing Vacuum testing at the port(s) indicated holds the recommended minimum 16 and 18 in-Hg.

15

25

18"-Hg

A6MF2 Outer/Rear Valve Body 102741-08K-IN 10-29-14