3D Printer Quick Info - Thingiverse
3D Printer Quick Info Equipment Description: PRINTER
Makerbot Thing-o-Matic 3D Printer #003157 (thing:4973)
ELECTRONICS Extruder Controller v3.6 with Makerbot Firmware v3.1, Makerbot Motherboard v2x(gen4) with Sailfish Firmware v4.1, Stepper Motor Driver Board v3.3 BUILD PLATFORM Automatic Build Platform (ABP) 2.0, with Aluminium Block Heated Build Platform (thing:9692) (Note: Conveyor belt & motor removed) EXTRUDER MK6 Stepstruder Motor, MK6 Acrylic/Delrin 1.75mm Filament Drive (Note: Can optionally use MK5 3mm version (thing:6300) with Plunger Spring adaptor (thing:12189), need to re-enable “Onboard Preferences->Misc->Extruder Hold”) HOT END MK6+ Aluminium heater block, K-type thermocouple, 40W Capsule Heater and Thermal Safety Shutoff Kit with holder (thing:32954), MK6 0.4mm Teflon Coated Brass Nozzle OTHER 2x Belt Tensioners (thing:11502), Y-idler Support Bracket (thing:7022), Coin holder (thing:7655), ToM Side Covers, Build Platform Heat Reflector, Cooling fans for PLA printing
Person(s) Responsible: Name _Guy Anonymous Name Some Young Dude
Email [email protected]_______ Extension _1234__ Email _ [email protected]____ Extension _6789__
Authorised Users: Lex Luthor, Tony Stark, Ika Musume ____________________________________________
Performance & Settings: ReplicatorG Version Driver Resolution Skeinforge Base Profile Z Axis Maximum Max Build Dimensions Print-o-Matic Settings Object infill Layer height Number of shells Feedrate Travel Feedrate Material Type Filament Diameter Nozzle Diameter Drive Gear Diameter Temperature Settings Extruder Platform
Version 40 (as of 2013-02-20) from replicat.org Thingomatic with HBP and Stepstruder MK6/MK7 (Sailfish) ~0.4-0.5 mm (XY), 0.3-0.4 mm (Z) SF50-Thingomatic-HBP-ABS 108.28 (ABS & Kapton) 109.3 (PLA, Masking Tape & acrylic) 120 mm (X), 120 mm (Y), 105 mm (Z) Unit %age mm # mm/s mm/s
Default Full Range 35 0-100 0.22 0.2-0.35 1 0-4 50 20-100 80 30-120 ABS ABS/PLA mm 1.75 1.7-3.2 mm 0.4 0.4 mm 10.58 10.58 ABS [°C] PLA [°C] 220-230 170-230 90-100 70-80
Filament Settings Measured Diameter [mm] Natural White ABS 1.756, 2.842old or 2.835new Blue Sky ABS 1.802 Blue ABS 1.775 or 2.8793 Red ABS 1.7862 3 Silver ABS 1.734 Black ABS 1.77 or 2.8531 Orange ABS 2.845 UV Green ABS 2.8671 3 Clear PLA 2.832old 3, 2.855new 3 or 1.7572 3 1. Difficult to print: use mouse ears and covers 2. Needs 1.75mm thermal barrel & delrin plate 3. Expensive or specialised material
Makerbot Thing-o-Matic 3D Printer #003157 (thing:4973)
ELECTRONICS Extruder Controller v3.6 with Makerbot Firmware v3.1, Makerbot Motherboard v2x(gen4) with Sailfish Firmware v4.1, Stepper Motor Driver Board v3.3 BUILD PLATFORM Automatic Build Platform (ABP) 2.0, with Aluminium Block Heated Build Platform (thing:9692) (Note: Conveyor belt & motor removed) EXTRUDER MK6 Stepstruder Motor, MK6 Acrylic/Delrin 1.75mm Filament Drive (Note: Can optionally use MK5 3mm version (thing:6300) with Plunger Spring adaptor (thing:12189), need to re-enable “Onboard Preferences->Misc->Extruder Hold”) HOT END MK6+ Aluminium heater block, K-type thermocouple, 40W Capsule Heater and Thermal Safety Shutoff Kit with holder (thing:32954), MK6 0.4mm Teflon Coated Brass Nozzle OTHER 2x Belt Tensioners (thing:11502), Y-idler Support Bracket (thing:7022), Coin holder (thing:7655), ToM Side Covers, Build Platform Heat Reflector, Cooling fans for PLA printing
Person(s) Responsible: Name _Guy Anonymous Name Some Young Dude
Email [email protected]_______ Extension _1234__ Email _ [email protected]____ Extension _6789__
Authorised Users: Lex Luthor, Tony Stark, Ika Musume ____________________________________________
Performance & Settings: ReplicatorG Version Driver Resolution Skeinforge Base Profile Z Axis Maximum Max Build Dimensions Print-o-Matic Settings Object infill Layer height Number of shells Feedrate Travel Feedrate Material Type Filament Diameter Nozzle Diameter Drive Gear Diameter Temperature Settings Extruder Platform
Version 40 (as of 2013-02-20) from replicat.org Thingomatic with HBP and Stepstruder MK6/MK7 (Sailfish) ~0.4-0.5 mm (XY), 0.3-0.4 mm (Z) SF50-Thingomatic-HBP-ABS 108.28 (ABS & Kapton) 109.3 (PLA, Masking Tape & acrylic) 120 mm (X), 120 mm (Y), 105 mm (Z) Unit %age mm # mm/s mm/s
Default Full Range 35 0-100 0.22 0.2-0.35 1 0-4 50 20-100 80 30-120 ABS ABS/PLA mm 1.75 1.7-3.2 mm 0.4 0.4 mm 10.58 10.58 ABS [°C] PLA [°C] 220-230 170-230 90-100 70-80
Filament Settings Measured Diameter [mm] Natural White ABS 1.756, 2.842old or 2.835new Blue Sky ABS 1.802 Blue ABS 1.775 or 2.8793 Red ABS 1.7862 3 Silver ABS 1.734 Black ABS 1.77 or 2.8531 Orange ABS 2.845 UV Green ABS 2.8671 3 Clear PLA 2.832old 3, 2.855new 3 or 1.7572 3 1. Difficult to print: use mouse ears and covers 2. Needs 1.75mm thermal barrel & delrin plate 3. Expensive or specialised material
