4322
Phone: 02/ 4322 2339 Fax: 02/ 4322 2403 Mob: 04 14 87 87 11 Email: [email protected] Web: www.panthertrikes.com ABN: 71 108 441 621 Dealers License No. 20536 Unit 7/ 379 Manns Road,
West Gosford
2250
N.S.W.
Australia
PECK SERIES CNC LATHE
Options: 6-Station NC Turret, Hydraulic Chuck (solid or hollow), Hydraulic Tailstock, 3-step Speed Change (manual or auto)
Specifications
PECK6136B
Max .Swing over bed
360mm 360mm 750/1000mm 750mm MT6(Φ90 1:20) C6 (D8) B-52mm / G-57mm B-100-3000rpm(I 100-1047 II 290-3000 (G 140-3000rpm)
Max. Work piece Length Spindle taper Chuck size Thru-hole of spindle
Spindle speeds (12steps) Tailstock center sleeve travel Tailstock center sleeve taper Repeatability error X feed speed Z feed speed Spindle motor
Packing dimensions (L×W×H mm) for 750 B Packing dimensions (L×W×H mm) for 1500 B Packing dimensions (L×W×H mm) for 750 G
CNC System Options: -GSK 980TA1 / KND100Ti-D (China) -FANUC Oi-Mate TD (Japan)
PECK6136G
150mm MT5 0.01mm B-4m/min / G-6m/min B-6m/min / G-8m/min 5.5kw 2100×1350×1700mm/1400Kg 2100×1350×1700mm/1500Kg 2305×1258×1655mm/1700KG
Standard Accessories Frequency Spindle Manual Chuck 4-Station NC Turret Full-splash Guard Steeples speed change
1 Panther CNC Lathe PECK 6136B With 52mm Spindle bore and 750mm between centers, four post Tool changer, Manual 200mm Diameter chuck and Fanuc Oi-Mate TD Controller AU $
Terms & Conditions: 12 months warranty on parts. Manufacturer warrants the products to be free from defects in material and workmanship for 12 months from the date of shipment to the original purchaser only. We will send parts (FREE) for your replacement. If the machine has worst running problems, we will send engineer to your factory for maintenance. NOTE: All tooling is considered wear items which not covered under machine warranty. Training & Setup: Additional Machine should be placed in position and main power connected prior to setup and training at customer site. Customer should pay for travel plus related expenses (may include hotel, airfare, and rental car etc.) We also welcome customer send people here for training how to operate machines. Lead time: 3~5 days, and customer should pay all relative expenses by themselves.
Price are variable based on exchange rate quoted = $ Quotation Valid for 30 Days and subject to terms and conditions Delivery Approximately 8-14 weeks from receiving deposit and order Deposit 40% Rest before shipment Freight Ex West Gosford Date15.08.2015
Hoping This Quote meets your requirements and we can be of assistance in future. Josef Furrer Director
West Gosford
2250
N.S.W.
Australia
PECK SERIES CNC LATHE
Options: 6-Station NC Turret, Hydraulic Chuck (solid or hollow), Hydraulic Tailstock, 3-step Speed Change (manual or auto)
Specifications
PECK6136B
Max .Swing over bed
360mm 360mm 750/1000mm 750mm MT6(Φ90 1:20) C6 (D8) B-52mm / G-57mm B-100-3000rpm(I 100-1047 II 290-3000 (G 140-3000rpm)
Max. Work piece Length Spindle taper Chuck size Thru-hole of spindle
Spindle speeds (12steps) Tailstock center sleeve travel Tailstock center sleeve taper Repeatability error X feed speed Z feed speed Spindle motor
Packing dimensions (L×W×H mm) for 750 B Packing dimensions (L×W×H mm) for 1500 B Packing dimensions (L×W×H mm) for 750 G
CNC System Options: -GSK 980TA1 / KND100Ti-D (China) -FANUC Oi-Mate TD (Japan)
PECK6136G
150mm MT5 0.01mm B-4m/min / G-6m/min B-6m/min / G-8m/min 5.5kw 2100×1350×1700mm/1400Kg 2100×1350×1700mm/1500Kg 2305×1258×1655mm/1700KG
Standard Accessories Frequency Spindle Manual Chuck 4-Station NC Turret Full-splash Guard Steeples speed change
1 Panther CNC Lathe PECK 6136B With 52mm Spindle bore and 750mm between centers, four post Tool changer, Manual 200mm Diameter chuck and Fanuc Oi-Mate TD Controller AU $
Terms & Conditions: 12 months warranty on parts. Manufacturer warrants the products to be free from defects in material and workmanship for 12 months from the date of shipment to the original purchaser only. We will send parts (FREE) for your replacement. If the machine has worst running problems, we will send engineer to your factory for maintenance. NOTE: All tooling is considered wear items which not covered under machine warranty. Training & Setup: Additional Machine should be placed in position and main power connected prior to setup and training at customer site. Customer should pay for travel plus related expenses (may include hotel, airfare, and rental car etc.) We also welcome customer send people here for training how to operate machines. Lead time: 3~5 days, and customer should pay all relative expenses by themselves.
Price are variable based on exchange rate quoted = $ Quotation Valid for 30 Days and subject to terms and conditions Delivery Approximately 8-14 weeks from receiving deposit and order Deposit 40% Rest before shipment Freight Ex West Gosford Date15.08.2015
Hoping This Quote meets your requirements and we can be of assistance in future. Josef Furrer Director
