4x8 slatwall mounting instructions
SLATWALL PANEL MOUNTING INSTRUCTIONS
NOTE: Must have four people to assemble this unit.
EXPANSION SCREW (x13)
#6xl 58 PHILLIPS SCREW (x13)
SLATWALL (xl)
TOOLS NEEDED
the top of the panel using a leveler (Figures B & C) Step 1 I.II.Mark Mark the 13 holes using the distances shown in Figure A: 23"
•
Step 2
I. Use drill and drill bit to make holes in the marked areas from step 1 (Figure A) II. Insert the expansion screw into the holes (Figure B) III. Have at least 2 people hold the slatwall panel while another person screws in the #6x158 phillips screws through the panel and into the wall (Figure C)
NOTE: Must have four people to assemble this unit.
EXPANSION SCREW (x13)
#6xl 58 PHILLIPS SCREW (x13)
SLATWALL (xl)
TOOLS NEEDED
the top of the panel using a leveler (Figures B & C) Step 1 I.II.Mark Mark the 13 holes using the distances shown in Figure A: 23"
•
Step 2
I. Use drill and drill bit to make holes in the marked areas from step 1 (Figure A) II. Insert the expansion screw into the holes (Figure B) III. Have at least 2 people hold the slatwall panel while another person screws in the #6x158 phillips screws through the panel and into the wall (Figure C)
