5L DMVF Series Compact Fluorescent - Cooper Industries
DMVF Series Compact Fluorescent Champ® Luminaires Applications: DMVF Series Champ Luminaires are used: • In areas made hazardous by abnormal conditions resulting in the presence of flammable vapors or gases
Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB)
5L
Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence Marine & Wet Locations 3, 3R, 4, 4X; IP66
Certifications and Compliances: • NEC and CEC: Class I, Division 2, Groups A, B, C, D Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II)
• In areas made hazardous by the presence of combustible dusts
Class I, Zone 2
• Where combustible dusts and flammable vapors are present simultaneously
• IEC:
• In marine applications where water spray and corrosive atmospheres are considerations
• UL Standards:
• On installations where vibration and rough usage are problematic
Zone 2 Ex nR IIC 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations
• Where a cool, efficient light source is required
• CSA Standards:
• In areas that require lamps to reach full illumination immediately
• IEC Standards:
• In refineries, chemical and petrochemical facilities, grain processing, handling or storage facilities, manufacturing plants, wastewater treatment plants, sewage treatment plants, oil terminals, food processing facilities, breweries, and any other manufacturing or processing facility where safe, reliable, hazardous area fluorescent or auxiliary lighting is needed
C22.2 No. 137
Accessories: Reflectors (to be used with globe) Type Cat. #
60079-15
Standard Materials:
Dome 30° Angle
• Ballast housings and mountings – copper-free aluminum (less than 0.4 of 1%)
To be ordered separately.
• Exterior hardware and guards – stainless steel • Reflectors – Krydon fiberglassreinforced polyester ®
Standard Features: • Housings made of die-cast copper-free aluminum (less than 0.4 of 1% copper) for strength and resistance to corrosion
• Hubs are provided with an integral conduit stop and bushing to help prevent damage to field wiring during installation • Epoxy powder finish and stainless steel external hardware for resistance to corrosion • Long-life gaskets which provide seals between mounting module, housing, and optical assembly • Grounding wire for safety • Cool operating design • Optional stainless steel open bottom guard permits direct access to the globe for easy relamping • Optional battery pack ballast for auxiliary lighting
Standard Finishes: • Aluminum – gray epoxy powder coat • Krydon material – high reflectance white • Stainless steel – natural
Energy Savings • Less wattage used with compact fluorescent lamps compared to equivalent incandescent lamps providing the same light output
Electrical Rating Ranges: • Wattage: Two 26, 32, or 42 watt lamps • 120–277V, 50–60Hz • 347V, 60Hz • 12, 24, and 125VDC
5L
• Mounting modules equipped with integral hub set screws for vibration resistance (ceiling, pendant, and quad mounts)
• Globe – heat- and impact-resistant internally fluted glass
RD739 RA739
Options: Description Suffix Restricted Breathing Construction ................................................................................. S826 Class I, Division 2 & Zone 2 Suitability Cooler Operating Temperatures (T-Numbers) Certified for IEC Zone 2 (Suffix S826TB) ........................................................................S826TB Furnished with Terminal Block Crimp Terminals Factory assembled with lamps installed for additional labor savings ........................... FA Fused – to protect ballast against abnormal line conditions (not available on CSA certified fixtures) (not suitable for marine applications) ................................................. S658 Lamps supplied with fixture........................................................................................... S714 Top hat with stainless steel threaded insert to attach ballast housing.......................... S806 ® TEFLON coating on globe for increased shatter protection......................................... S808 Quick-Clip ....................................................................................................................... S890
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1071
5L
DMVF Series Compact Fluorescent
Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB)
Champ® Luminaires
Mounting Style Pendant Mount
Hub Luminaire Size (In.) Watts 3
/4 1 /4 1 3 /4 1
52
3
64
/4 /4 3 /4
52 64 84
DMVF2HA052GP DMVF2HA064GP DMVF2HA084GP
/4 1 3 /4 1 3 /4 1
52
DMVF2C052GP DMVF3C052GP DMVF2C064GP DMVF3C064GP DMVF2C084GP DMVF3C084GP
/4 1 3 /4 1 3 /4 1
52
Flexible Pendant Mount
3
Ceiling Mount Thru-Feed
3
Wall Mount Thru-Feed
DMVF Series Fluorescent with G303 Globe and P33 Guard Cat. # DMVF2A052GP DMVF3A052GP DMVF2A064GP DMVF3A064GP DMVF2A084GP DMVF3A084GP
84
3
64 84
3
64 84
DMVF2TW052GP DMVF3TW052GP DMVF2TW064GP DMVF3TW064GP DMVF2TW084GP DMVF3TW084GP
3 3
/4 /4 3 /4
52 64 84
DMVF25Q052GP DMVF25Q064GP DMVF25Q084GP
Stanchion Mount 25° Angle
11/2 11/2 11/2
52 64 84
DMVFJ052GP DMVFJ064GP DMVFJ084GP
Stanchion Mount Straight
11/2 11/2 11/2
52 64 84
DMVFP052GP DMVFP064GP DMVFP084GP
5L
Quad-Mount Pendant, Adjustable Thru-Feed, 25° Angle, 121/ 2° Angle
1.
Catalog numbers are basic numbers. Voltages must be specified. STANDARD VOLTAGE BALLASTS NEC/UL & CEC/CSA (cUL) CEC/CSA (cUL)
Voltage Suffix
1072
120–277V 50–60Hz /UNV
www.crouse-hinds.com
US: 1-866-764-5454
347V 60Hz /347
CAN: 1-800-265-0502
OPTIONAL BALLASTS 125V DC /125VDC
12V DC /012VDC
24V DC /024VDC
Copyright© 2013 Eaton’s Crouse-Hinds Business
Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence Marine & Wet Locations 3, 3R, 4, 4X; IP66
5L
DMVF Series – Ordering by Components
DMVF luminaires are available in components. A complete I. II. III.
luminaire consists of: Champ Cover (Mounting Module) DMVF Ballast Housing Globe, Globe Guard, Globe Reflectors
I. Champ Cover (Mounting Module): Type Pendant Mount
Conduit
Cat. #
/4" 1
APM2 APM3
Flexible Pendant
3
/4"
HPM2
Ceiling
3
/4" 1
CM2 CM3
Wall
3
/4" 1
TWM2 TWM3
3
Stanchion - 25 Degree Angle
11/2"
JM5
Stanchion - Straight
11/2"
PM5
Quad-Mount
3
/4"
QM25
II. Ballast Housings: Complete catalog number must have the voltage suffix (UNV shown) and any options suffixes. Lamp Type Compact Fluorescent
Lamp Watts
Cat. #
2 (26W) 2 (32W) 2 (42W)
DMVF052/UNV DMVF064/UNV DMVF084/UNV
III. Globe, Guards and Reflectors: Cat. #
Globe Teflon Coated Globe Guard Globe Reflector-Dome Globe Reflector-Angle
G303 G303S808 P33 RD739 RA739
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
5L
Type
Copyright© 2013 Eaton’s Crouse-Hinds Business
1073
5L
DMVF Series Compact Fluorescent
Family Tree
5L
Champ® Luminaires
*These plastic reflectors are for non-hazardous areas only (50-100W max).
1074
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
DMVF Series Compact Fluorescent
5L
Temperature Performance Data Weights
Champ® Luminaires Temperature Performance Data: Lamp Watts
Minimum Operating Temperature
Maximum Ambient Temp.
Fluorescent: DMVF
Class I Non-restricted Restricted Breathing Breathing Div. 2
Class II
Simultaneous Presence Non-restricted Restricted Breathing Breathing
Zone 2 or Div. 2
Division 1
Cl. I, Div. 2/Cl. II
Cl. I, Zone 2 or Div. 2/Cl. II
Supply Wire °C
52 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
64 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
84 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
Net Luminaire Weights: Luminaire Series
Luminaire with Globe, Guard (lbs.)
Lamp Watts
181/4 Lbs.
DMVF 52, 64, 84 Type Add for mounting modules: Pendant Flexible Pendant Ceiling Wall Quad-Mount Angle Stanchion Straight Stanchion
11/4 11/2 23/4 41/2 31/2 31/2 41/2
Add for reflectors: Dome 11/4 30° Angle Deduct: 1 lb. for luminaire with P33 Guard
13/4
5L
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1075
5L
DMVF Series Compact Fluorescent
Photometric Data
Champ® Luminaires
Note: For 52 watt DMVF applications, use a .75 multiplier. For complete 84W IES files, please log onto www.crouse-hinds.com and go to Resources > Specification and Design Support > Photometric Files.
DMVF Photometric Data Isofootcandle Chart: Luminaire with globe and dome reflector
DMVF064GRD Dome Reflector
DMVF064GRD Dome Reflector Coefficient of Utilization Effective Floor Cavity Reflectance 20% Eff. Ceil.
5L
Footcandle Values for Isofootcandle Lines Mtg. Hgt.
A
B
C
D
E
8' 10' 12' 16'
4.00 2.56 1.78 1.00
2.00 1.28 0.89 0.50
1.00 0.64 0.44 0.25
0.50 0.32 0.22 0.13
0.25 0.16 0.11 0.06
Room Cavity Ratio Wall
1
2
3
4
5
6
7
8
9
10
80*
50* 30* 10*
.741 .694 .652
.617 .548 .491
.524 .445 .382
.452 .370 .308
.396 .314 .254
.351 .271 .214
.314 .237 .183
.283 .210 .159
.258 .188 .140
.236 .169 .125
70*
50* 30* 10*
.722 .679 .640
.601 .537 .483
.510 .437 .378
.440 .364 .305
.386 .309 .252
.342 .267 .212
.307 .234 .182
.277 .207 .158
.252 .185 .139
.231 .167 .124
50*
50* 30* 10*
.686 .650 .617
.570 .516 .470
.484 .421 .369
.418 .351 .299
.367 .299 .247
.326 .259 .209
.293 .227 .180
.265 .202 .155
.242 .181 .138
.223 .163 .123
30*
50* 30* 10*
.653 .623 .596
.542 .497 .457
.460 .406 .361
.398 .340 .293
.350 .290 .243
.311 .251 .206
.280 .221 .177
.254 .197 .154
.233 .176 .136
.214 .160 .121
.50* 30* 10* 0*
.622 .598 .576 .557
.516 .478 .444 .424
.437 .392 .352 .332
.379 .329 .287 .267
.333 .271 .239 .220
.297 .244 .203 .184
.268 .215 .175 .157
.244 .192 .152 .136
.224 .172 .135 .119
.206 .156 .120 .105
10* 0*
*Percent Reflectance.
1076
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
DMVF Series Compact Fluorescent
Dimensions
5L
Champ® Luminaires Dimensions In Inches:
Pendant Mount
Quad-Mount
25° Angle Stanchion Mount
Wall Mount
5L
Ceiling Mount
Ceiling Mount – Top View
Straight Stanchion Mount
Luminaire with Globe, Guard, Reflectors
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1077
Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB)
5L
Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence Marine & Wet Locations 3, 3R, 4, 4X; IP66
Certifications and Compliances: • NEC and CEC: Class I, Division 2, Groups A, B, C, D Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II)
• In areas made hazardous by the presence of combustible dusts
Class I, Zone 2
• Where combustible dusts and flammable vapors are present simultaneously
• IEC:
• In marine applications where water spray and corrosive atmospheres are considerations
• UL Standards:
• On installations where vibration and rough usage are problematic
Zone 2 Ex nR IIC 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations
• Where a cool, efficient light source is required
• CSA Standards:
• In areas that require lamps to reach full illumination immediately
• IEC Standards:
• In refineries, chemical and petrochemical facilities, grain processing, handling or storage facilities, manufacturing plants, wastewater treatment plants, sewage treatment plants, oil terminals, food processing facilities, breweries, and any other manufacturing or processing facility where safe, reliable, hazardous area fluorescent or auxiliary lighting is needed
C22.2 No. 137
Accessories: Reflectors (to be used with globe) Type Cat. #
60079-15
Standard Materials:
Dome 30° Angle
• Ballast housings and mountings – copper-free aluminum (less than 0.4 of 1%)
To be ordered separately.
• Exterior hardware and guards – stainless steel • Reflectors – Krydon fiberglassreinforced polyester ®
Standard Features: • Housings made of die-cast copper-free aluminum (less than 0.4 of 1% copper) for strength and resistance to corrosion
• Hubs are provided with an integral conduit stop and bushing to help prevent damage to field wiring during installation • Epoxy powder finish and stainless steel external hardware for resistance to corrosion • Long-life gaskets which provide seals between mounting module, housing, and optical assembly • Grounding wire for safety • Cool operating design • Optional stainless steel open bottom guard permits direct access to the globe for easy relamping • Optional battery pack ballast for auxiliary lighting
Standard Finishes: • Aluminum – gray epoxy powder coat • Krydon material – high reflectance white • Stainless steel – natural
Energy Savings • Less wattage used with compact fluorescent lamps compared to equivalent incandescent lamps providing the same light output
Electrical Rating Ranges: • Wattage: Two 26, 32, or 42 watt lamps • 120–277V, 50–60Hz • 347V, 60Hz • 12, 24, and 125VDC
5L
• Mounting modules equipped with integral hub set screws for vibration resistance (ceiling, pendant, and quad mounts)
• Globe – heat- and impact-resistant internally fluted glass
RD739 RA739
Options: Description Suffix Restricted Breathing Construction ................................................................................. S826 Class I, Division 2 & Zone 2 Suitability Cooler Operating Temperatures (T-Numbers) Certified for IEC Zone 2 (Suffix S826TB) ........................................................................S826TB Furnished with Terminal Block Crimp Terminals Factory assembled with lamps installed for additional labor savings ........................... FA Fused – to protect ballast against abnormal line conditions (not available on CSA certified fixtures) (not suitable for marine applications) ................................................. S658 Lamps supplied with fixture........................................................................................... S714 Top hat with stainless steel threaded insert to attach ballast housing.......................... S806 ® TEFLON coating on globe for increased shatter protection......................................... S808 Quick-Clip ....................................................................................................................... S890
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1071
5L
DMVF Series Compact Fluorescent
Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB)
Champ® Luminaires
Mounting Style Pendant Mount
Hub Luminaire Size (In.) Watts 3
/4 1 /4 1 3 /4 1
52
3
64
/4 /4 3 /4
52 64 84
DMVF2HA052GP DMVF2HA064GP DMVF2HA084GP
/4 1 3 /4 1 3 /4 1
52
DMVF2C052GP DMVF3C052GP DMVF2C064GP DMVF3C064GP DMVF2C084GP DMVF3C084GP
/4 1 3 /4 1 3 /4 1
52
Flexible Pendant Mount
3
Ceiling Mount Thru-Feed
3
Wall Mount Thru-Feed
DMVF Series Fluorescent with G303 Globe and P33 Guard Cat. # DMVF2A052GP DMVF3A052GP DMVF2A064GP DMVF3A064GP DMVF2A084GP DMVF3A084GP
84
3
64 84
3
64 84
DMVF2TW052GP DMVF3TW052GP DMVF2TW064GP DMVF3TW064GP DMVF2TW084GP DMVF3TW084GP
3 3
/4 /4 3 /4
52 64 84
DMVF25Q052GP DMVF25Q064GP DMVF25Q084GP
Stanchion Mount 25° Angle
11/2 11/2 11/2
52 64 84
DMVFJ052GP DMVFJ064GP DMVFJ084GP
Stanchion Mount Straight
11/2 11/2 11/2
52 64 84
DMVFP052GP DMVFP064GP DMVFP084GP
5L
Quad-Mount Pendant, Adjustable Thru-Feed, 25° Angle, 121/ 2° Angle
1.
Catalog numbers are basic numbers. Voltages must be specified. STANDARD VOLTAGE BALLASTS NEC/UL & CEC/CSA (cUL) CEC/CSA (cUL)
Voltage Suffix
1072
120–277V 50–60Hz /UNV
www.crouse-hinds.com
US: 1-866-764-5454
347V 60Hz /347
CAN: 1-800-265-0502
OPTIONAL BALLASTS 125V DC /125VDC
12V DC /012VDC
24V DC /024VDC
Copyright© 2013 Eaton’s Crouse-Hinds Business
Cl. II, Groups E, F, G; Cl. III & Simultaneous Presence Marine & Wet Locations 3, 3R, 4, 4X; IP66
5L
DMVF Series – Ordering by Components
DMVF luminaires are available in components. A complete I. II. III.
luminaire consists of: Champ Cover (Mounting Module) DMVF Ballast Housing Globe, Globe Guard, Globe Reflectors
I. Champ Cover (Mounting Module): Type Pendant Mount
Conduit
Cat. #
/4" 1
APM2 APM3
Flexible Pendant
3
/4"
HPM2
Ceiling
3
/4" 1
CM2 CM3
Wall
3
/4" 1
TWM2 TWM3
3
Stanchion - 25 Degree Angle
11/2"
JM5
Stanchion - Straight
11/2"
PM5
Quad-Mount
3
/4"
QM25
II. Ballast Housings: Complete catalog number must have the voltage suffix (UNV shown) and any options suffixes. Lamp Type Compact Fluorescent
Lamp Watts
Cat. #
2 (26W) 2 (32W) 2 (42W)
DMVF052/UNV DMVF064/UNV DMVF084/UNV
III. Globe, Guards and Reflectors: Cat. #
Globe Teflon Coated Globe Guard Globe Reflector-Dome Globe Reflector-Angle
G303 G303S808 P33 RD739 RA739
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
5L
Type
Copyright© 2013 Eaton’s Crouse-Hinds Business
1073
5L
DMVF Series Compact Fluorescent
Family Tree
5L
Champ® Luminaires
*These plastic reflectors are for non-hazardous areas only (50-100W max).
1074
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
DMVF Series Compact Fluorescent
5L
Temperature Performance Data Weights
Champ® Luminaires Temperature Performance Data: Lamp Watts
Minimum Operating Temperature
Maximum Ambient Temp.
Fluorescent: DMVF
Class I Non-restricted Restricted Breathing Breathing Div. 2
Class II
Simultaneous Presence Non-restricted Restricted Breathing Breathing
Zone 2 or Div. 2
Division 1
Cl. I, Div. 2/Cl. II
Cl. I, Zone 2 or Div. 2/Cl. II
Supply Wire °C
52 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
64 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
84 Watt
–20°C (4°F)
40°C (104°F) T3
T6
T6
T3/T6
T6
60
Net Luminaire Weights: Luminaire Series
Luminaire with Globe, Guard (lbs.)
Lamp Watts
181/4 Lbs.
DMVF 52, 64, 84 Type Add for mounting modules: Pendant Flexible Pendant Ceiling Wall Quad-Mount Angle Stanchion Straight Stanchion
11/4 11/2 23/4 41/2 31/2 31/2 41/2
Add for reflectors: Dome 11/4 30° Angle Deduct: 1 lb. for luminaire with P33 Guard
13/4
5L
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1075
5L
DMVF Series Compact Fluorescent
Photometric Data
Champ® Luminaires
Note: For 52 watt DMVF applications, use a .75 multiplier. For complete 84W IES files, please log onto www.crouse-hinds.com and go to Resources > Specification and Design Support > Photometric Files.
DMVF Photometric Data Isofootcandle Chart: Luminaire with globe and dome reflector
DMVF064GRD Dome Reflector
DMVF064GRD Dome Reflector Coefficient of Utilization Effective Floor Cavity Reflectance 20% Eff. Ceil.
5L
Footcandle Values for Isofootcandle Lines Mtg. Hgt.
A
B
C
D
E
8' 10' 12' 16'
4.00 2.56 1.78 1.00
2.00 1.28 0.89 0.50
1.00 0.64 0.44 0.25
0.50 0.32 0.22 0.13
0.25 0.16 0.11 0.06
Room Cavity Ratio Wall
1
2
3
4
5
6
7
8
9
10
80*
50* 30* 10*
.741 .694 .652
.617 .548 .491
.524 .445 .382
.452 .370 .308
.396 .314 .254
.351 .271 .214
.314 .237 .183
.283 .210 .159
.258 .188 .140
.236 .169 .125
70*
50* 30* 10*
.722 .679 .640
.601 .537 .483
.510 .437 .378
.440 .364 .305
.386 .309 .252
.342 .267 .212
.307 .234 .182
.277 .207 .158
.252 .185 .139
.231 .167 .124
50*
50* 30* 10*
.686 .650 .617
.570 .516 .470
.484 .421 .369
.418 .351 .299
.367 .299 .247
.326 .259 .209
.293 .227 .180
.265 .202 .155
.242 .181 .138
.223 .163 .123
30*
50* 30* 10*
.653 .623 .596
.542 .497 .457
.460 .406 .361
.398 .340 .293
.350 .290 .243
.311 .251 .206
.280 .221 .177
.254 .197 .154
.233 .176 .136
.214 .160 .121
.50* 30* 10* 0*
.622 .598 .576 .557
.516 .478 .444 .424
.437 .392 .352 .332
.379 .329 .287 .267
.333 .271 .239 .220
.297 .244 .203 .184
.268 .215 .175 .157
.244 .192 .152 .136
.224 .172 .135 .119
.206 .156 .120 .105
10* 0*
*Percent Reflectance.
1076
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
DMVF Series Compact Fluorescent
Dimensions
5L
Champ® Luminaires Dimensions In Inches:
Pendant Mount
Quad-Mount
25° Angle Stanchion Mount
Wall Mount
5L
Ceiling Mount
Ceiling Mount – Top View
Straight Stanchion Mount
Luminaire with Globe, Guard, Reflectors
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1077
