Accessories - Palisade Filigree IS.pdf - Fanimation

Mounting the Filigree Model No. FL _* *_

Before discarding packaging materials, be certain all parts have been removed You will find the filigree (set of 2) and the hardware * in its own package (FL_* *_). packet (FLHDW_* _)

INSTALLATION NOTE Do not fasten the filigree while fan is operating. Personal injury may result and/or damage to the fan blades.

Foam Pad (6 places)

1. Attach foam pads as shown (Figure 1). NOTE: Pads may already be attached. 2. Insert two screws through the mounting bracket holes in the filigree pieces and secure to the extension pole. Do not over tighten the screws. 3. Repeat this process for the bottom holes (Figure 1).

Screw (4) Filigree (2)

Foam Pad (Typical)

NOTE: The foot of the filigree rests on the top of the horizontal tube.

INSTALLATION NOTE IF one of the filigree feet does not touch the horizontal tube. Loosen the connecting harness bolts and locknuts, and adjust the horizontal tube so that both filligree feet touch the tube. ** FINISH CODES AB

ANTIQUE BRASS

AC

ANTIQUE COPPER

BL

BLACK

MC

MARBLED CREAM

MW

MATTE WHITE

PB

POLISHED BRASS

PW

PEWTER

RS

RUST

SN

SATIN NICKEL

WH

WHITE

Locknut (2)

Foot with Foam Pad Connecting Harness Bolt (2)

How to Order Parts When ordering repair parts, always give the following information: • Part Number • Part Description • Ceiling Fan Model Number Contact your retail store for repair parts.

Horizontal Tube Foam Pad (Typical)

Figure 1

10983 Bennett Parkway Zionsville, IN 46077 (888) 567-2055 FAX (866) 482-5215 Visit Our Website @ fanimation.com

2004/04