Collapsible Water Storage Barrel
Collapsible Water Storage Barrel Parts List: Barrel, Barrel Legs, Drain Spigot, Overflow cap.
1A
1D
1B
1C
Installation:
1E
1.
Connect the drain spigot to the fitting at the bottom side of the water storage barrel. [See Fig 1A,B]
2.
Install the cap on the overflow fitting at the top side of the water storage barrel. [See Fig 1C]
3.
Install the cap and filter assembly on the lid of the water storage barrel. [See Fig 1D,E]
4.
Unfold the water storage barrel and lay it on its side. Install the support legs into the built-in sleeves on the sides of the water storage barrel making sure the leg caps are positioned at the bottom of the water storage barrel. [See Fig 2A,B,C]
5.
Zipper the lid closed.
™
2A
2B
2C
Water Storage Barrel Location:
3A
4A
Off Season Storage: At the end of the season the water storage barrel should be emptied and stored in a heated place in order to prevent freezing or damage to your water storage barrel.
Warning: Never allow children to play in or around the water storage barrel. Always securely attach the lid to avoid a child drowning. Never drink water from the water storage barrel. Use water from the water storage barrel for watering or outdoor cleaning purposes only. Always place the water storage barrel on a flat and solid surface. Check the downspout does not contain heating cables before cutting when installing use safety glasses and protective gloves.
Note: Choose a downspout that has a level and firm surface beneath so that the water storage barrel will be level. 6.
Position the water storage barrel under the downspout and mark the downspout at the midway point from the top of the water storage barrel to the bottom of the water storage barrel. Cut off the downspout at this mark. [See Fig 3A] Note: It may be necessary to remove the downspout from the wall to cut it.
7.
Move the water storage barrel into position against the wall on the level surface and insert the downspout on the wall into the water storage barrel. Zip the lid tightly around the downspout inserted into the water storage barrel. [See Fig 4A] Note: The inserted downspout will add stability to the empty water storage barrel until it gets filled with water. However, it is recommended to add a couple inches of tap water to the water storage barrel for added weight and stability to prevent movement by heavy wind etc. Once water is collected in the water storage barrel, it can be emptied through the bottom spigot or unzip the top and use a watering can.
IMPORTANT — PLEASE READ 1
2
A
A
Push the tap through the tank, fitting the rubber washers as shown; one on each side Fit the tap upside down tightening as tight as you can by hand.
Insert the poles.
3
Position on a smooth, flat surface. Half fill with water. With the spigot in an inverted position.
4
Twist the tap clockwise to the upright position. Rotate the spigot clockwise to position with flow in a downward direction
5
Caution: Never drag or move the tank when it is full of water. The tank should be completely drained before it is moved.
6 month limited liability warranty against manufacture defect and workmanship. Punctures and/or dragging product filled with water are not covered by the warranty.
.
1A
1D
1B
1C
Installation:
1E
1.
Connect the drain spigot to the fitting at the bottom side of the water storage barrel. [See Fig 1A,B]
2.
Install the cap on the overflow fitting at the top side of the water storage barrel. [See Fig 1C]
3.
Install the cap and filter assembly on the lid of the water storage barrel. [See Fig 1D,E]
4.
Unfold the water storage barrel and lay it on its side. Install the support legs into the built-in sleeves on the sides of the water storage barrel making sure the leg caps are positioned at the bottom of the water storage barrel. [See Fig 2A,B,C]
5.
Zipper the lid closed.
™
2A
2B
2C
Water Storage Barrel Location:
3A
4A
Off Season Storage: At the end of the season the water storage barrel should be emptied and stored in a heated place in order to prevent freezing or damage to your water storage barrel.
Warning: Never allow children to play in or around the water storage barrel. Always securely attach the lid to avoid a child drowning. Never drink water from the water storage barrel. Use water from the water storage barrel for watering or outdoor cleaning purposes only. Always place the water storage barrel on a flat and solid surface. Check the downspout does not contain heating cables before cutting when installing use safety glasses and protective gloves.
Note: Choose a downspout that has a level and firm surface beneath so that the water storage barrel will be level. 6.
Position the water storage barrel under the downspout and mark the downspout at the midway point from the top of the water storage barrel to the bottom of the water storage barrel. Cut off the downspout at this mark. [See Fig 3A] Note: It may be necessary to remove the downspout from the wall to cut it.
7.
Move the water storage barrel into position against the wall on the level surface and insert the downspout on the wall into the water storage barrel. Zip the lid tightly around the downspout inserted into the water storage barrel. [See Fig 4A] Note: The inserted downspout will add stability to the empty water storage barrel until it gets filled with water. However, it is recommended to add a couple inches of tap water to the water storage barrel for added weight and stability to prevent movement by heavy wind etc. Once water is collected in the water storage barrel, it can be emptied through the bottom spigot or unzip the top and use a watering can.
IMPORTANT — PLEASE READ 1
2
A
A
Push the tap through the tank, fitting the rubber washers as shown; one on each side Fit the tap upside down tightening as tight as you can by hand.
Insert the poles.
3
Position on a smooth, flat surface. Half fill with water. With the spigot in an inverted position.
4
Twist the tap clockwise to the upright position. Rotate the spigot clockwise to position with flow in a downward direction
5
Caution: Never drag or move the tank when it is full of water. The tank should be completely drained before it is moved.
6 month limited liability warranty against manufacture defect and workmanship. Punctures and/or dragging product filled with water are not covered by the warranty.
.
