Convotherm Acc 101705.qxd
Item __________________________________ Quantity _______________________________ FCSI Section ____________________________
THE "MINI" COMBI OVEN-STEAMER Options & Accessories 34” EQUIPMENT STAND OPEN TYPE STAND, ALL STAINLESS STEEL CONSTRUCTION
Approval _______________________________ Date __________________________________
MODEL:
CST610MOB
Only used for model OES 6.10 mini.
Convotherm Standard Features: I I
Spacers provided for securing MINI legs into proper position and accomodating utilities All stainless steel welded construction with 11⁄4˝ square tubing
I
Stationary shelf provided at bottom of stand
ITEM NUMBER
I
Adjustable feet (rear feet are flanged for floor bolting)
__________________________________________
Note: Not indended for stacking units.
COMBI OVEN-STEAMER
Project ________________________________
Options and Accessories: Ë Pull-Out Shelf Kit (111724) Ë Pan Rack Kit (111726)
Shown with optional Pull-Out Shelf Kit and Pan Rack Kit.
Ë Stainless Steel Wire Shelves (WS5)
Ë Stainless Steel Perforated Cafeteria Pans (PP) Ë Stainless Steel Solid Cafeteria Pans (SP)
Short Form Specifications Shall be a Convotherm 34” high Equipment Stand CST610MOB with: Cups provided for securing unit into proper position and accomodating utilities; All stainless steel welded construction with 11⁄4” square tubing; Stationary shelf at bottom of stand; Adjustable feet (rear feet are flanged for floor bolting).
SECT.
IIB PAGE 17
1013
179 St., St., 1333 East 179
1-216-481-4900 Tel: 1-216-481-4900
www.ConvothermUSA.com Web Site: www.ClevelandRange.com
Ohio, U.S.A. U.S.A.44110 44110 Cleveland, Ohio,
1-216-481-3782 Fax: 1-216-481-3782
[email protected] Email: [email protected]
CST610MOB MINI EQUIPMENT STAND
21.75 in / 552.5 mm
30.00 in / 762.0 mm
34.25 33.25 in
8.81 7.81 in
mm / 870.0 844.6
mm / 223.8 198.4
Shown with optional Pull-out Shelf, optional Pan Racks
NOTES:
Convotherm reserves right of design improvement or modification, as warranted. Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Convotherm equipment is built to comply with applicable standards for manufacturers.
SECT.
IIB
18
PAGE 1013
Item __________________________________ Quantity _______________________________ FCSI Section ____________________________
THE "MINI" COMBI OVEN-STEAMER Options & Accessories 25” EQUIPMENT STAND OPEN TYPE STAND, ALL STAINLESS STEEL CONSTRUCTION
Approval _______________________________ Date __________________________________
MODEL:
CST1010MOB
Only used for model OES 10.10 mini.
Convotherm Standard Features: I I
Spacers provided for securing MINI legs into proper position and accomodating utilities All stainless steel welded construction with 11⁄4˝ square tubing
I
Stationary shelf provided at bottom of stand
ITEM NUMBER
I
Adjustable feet (rear feet are flanged for floor bolting)
__________________________________________
Note: Not indended for stacking units.
COMBI OVEN-STEAMER
Project ________________________________
Options and Accessories: Ë Pull-Out Shelf Kit (111724) Ë Pan Rack Kit (111726)
Shown with optional Pull-Out Shelf Kit and Pan Rack Kit.
Ë Stainless Steel Wire Shelves (WS5)
Ë Stainless Steel Perforated Cafeteria Pans (PP) Ë Stainless Steel Solid Cafeteria Pans (SP)
Short Form Specifications Shall be a Convotherm 34” high Equipment Stand CST1010MOB with: Cups provided for securing unit into proper position and accomodating utilities; All stainless steel welded construction with 11⁄4” square tubing; Stationary shelf at bottom of stand; Adjustable feet (rear feet are flanged for floor bolting).
SECT.
IIB PAGE 19
1013
179 St., St., 1333 East 179
1-216-481-4900 Tel: 1-216-481-4900
www.ConvothermUSA.com Web Site: www.ClevelandRange.com
Ohio, U.S.A. U.S.A.44110 44110 Cleveland, Ohio,
1-216-481-3782 Fax: 1-216-481-3782
[email protected] Email: [email protected]
CST1010MOB MINI EQUIPMENT STAND
21.75 in / 552.5 mm
30.00 in / 762.0 mm
26.23 25.23 in
8.81 7.81 in
mm / 666 641
mm / 223.8 198.4
Shown with optional Pull-out Shelf, optional Pan Racks
NOTES:
Convotherm reserves right of design improvement or modification, as warranted. Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Convotherm equipment is built to comply with applicable standards for manufacturers.
SECT.
IIB
20
PAGE 1013
THE "MINI" COMBI OVEN-STEAMER Options & Accessories 34” EQUIPMENT STAND OPEN TYPE STAND, ALL STAINLESS STEEL CONSTRUCTION
Approval _______________________________ Date __________________________________
MODEL:
CST610MOB
Only used for model OES 6.10 mini.
Convotherm Standard Features: I I
Spacers provided for securing MINI legs into proper position and accomodating utilities All stainless steel welded construction with 11⁄4˝ square tubing
I
Stationary shelf provided at bottom of stand
ITEM NUMBER
I
Adjustable feet (rear feet are flanged for floor bolting)
__________________________________________
Note: Not indended for stacking units.
COMBI OVEN-STEAMER
Project ________________________________
Options and Accessories: Ë Pull-Out Shelf Kit (111724) Ë Pan Rack Kit (111726)
Shown with optional Pull-Out Shelf Kit and Pan Rack Kit.
Ë Stainless Steel Wire Shelves (WS5)
Ë Stainless Steel Perforated Cafeteria Pans (PP) Ë Stainless Steel Solid Cafeteria Pans (SP)
Short Form Specifications Shall be a Convotherm 34” high Equipment Stand CST610MOB with: Cups provided for securing unit into proper position and accomodating utilities; All stainless steel welded construction with 11⁄4” square tubing; Stationary shelf at bottom of stand; Adjustable feet (rear feet are flanged for floor bolting).
SECT.
IIB PAGE 17
1013
179 St., St., 1333 East 179
1-216-481-4900 Tel: 1-216-481-4900
www.ConvothermUSA.com Web Site: www.ClevelandRange.com
Ohio, U.S.A. U.S.A.44110 44110 Cleveland, Ohio,
1-216-481-3782 Fax: 1-216-481-3782
[email protected] Email: [email protected]
CST610MOB MINI EQUIPMENT STAND
21.75 in / 552.5 mm
30.00 in / 762.0 mm
34.25 33.25 in
8.81 7.81 in
mm / 870.0 844.6
mm / 223.8 198.4
Shown with optional Pull-out Shelf, optional Pan Racks
NOTES:
Convotherm reserves right of design improvement or modification, as warranted. Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Convotherm equipment is built to comply with applicable standards for manufacturers.
SECT.
IIB
18
PAGE 1013
Item __________________________________ Quantity _______________________________ FCSI Section ____________________________
THE "MINI" COMBI OVEN-STEAMER Options & Accessories 25” EQUIPMENT STAND OPEN TYPE STAND, ALL STAINLESS STEEL CONSTRUCTION
Approval _______________________________ Date __________________________________
MODEL:
CST1010MOB
Only used for model OES 10.10 mini.
Convotherm Standard Features: I I
Spacers provided for securing MINI legs into proper position and accomodating utilities All stainless steel welded construction with 11⁄4˝ square tubing
I
Stationary shelf provided at bottom of stand
ITEM NUMBER
I
Adjustable feet (rear feet are flanged for floor bolting)
__________________________________________
Note: Not indended for stacking units.
COMBI OVEN-STEAMER
Project ________________________________
Options and Accessories: Ë Pull-Out Shelf Kit (111724) Ë Pan Rack Kit (111726)
Shown with optional Pull-Out Shelf Kit and Pan Rack Kit.
Ë Stainless Steel Wire Shelves (WS5)
Ë Stainless Steel Perforated Cafeteria Pans (PP) Ë Stainless Steel Solid Cafeteria Pans (SP)
Short Form Specifications Shall be a Convotherm 34” high Equipment Stand CST1010MOB with: Cups provided for securing unit into proper position and accomodating utilities; All stainless steel welded construction with 11⁄4” square tubing; Stationary shelf at bottom of stand; Adjustable feet (rear feet are flanged for floor bolting).
SECT.
IIB PAGE 19
1013
179 St., St., 1333 East 179
1-216-481-4900 Tel: 1-216-481-4900
www.ConvothermUSA.com Web Site: www.ClevelandRange.com
Ohio, U.S.A. U.S.A.44110 44110 Cleveland, Ohio,
1-216-481-3782 Fax: 1-216-481-3782
[email protected] Email: [email protected]
CST1010MOB MINI EQUIPMENT STAND
21.75 in / 552.5 mm
30.00 in / 762.0 mm
26.23 25.23 in
8.81 7.81 in
mm / 666 641
mm / 223.8 198.4
Shown with optional Pull-out Shelf, optional Pan Racks
NOTES:
Convotherm reserves right of design improvement or modification, as warranted. Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Convotherm equipment is built to comply with applicable standards for manufacturers.
SECT.
IIB
20
PAGE 1013
