corridor 6521
CORRIDOR® 6521 EXECUTIVE DESK
bdiusa.com [email protected]
Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/
T1 4mm Hex Wrench H1 1/4-20 x 12mm Screw x 3 H5 1/4-20 x 32mm Screw x 6
Placement and Maintenance Corridor® Office furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth.
H7 Barrel Nut x 4 H8 1/4-20 x 15mm Screw x 4
Your Corridor® Office furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product.
H9 1/4-20 x 58mm Screw x 6 H10 1/4-20 x 87mm Screw x 2
Step 1 Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI retailer. C11 Wire Management Lid
H11 Bumper x 5 H12 10-32 x 37mm Screw x 4
C1 Glass Panel
H13 Leveler x 4
C10 Modesty Panel Tool Required: Phillips screwdriver
C12 Removable side panel x 2
A4 Wire Management Trough
A1 Drawer Assembly
C12 Removable side panel x 2
A3 Right Leg
C13 Center Drawer Liner x 1 A2 Left Leg
Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI Made in China. 12.08.2015 V2
C14 Side Drawer Liner x 2
Step 2 - Install Base Aligning the Colored Dots on the same side, attach Wire Management Trough A4 to Modesty Panel C8 using Screw H1 and Hex Wrench. Keep screws loose until Step 7.
A4
H1 (x3)
Colored Dots
C10
A4
C10
Step 3 - Match Colored Dot on Right Leg A3 with Colored Dot on Modesty Panel Assembly and attach using Screws H5 and Hex Wrench T1. Keep screws loose until Step 5. Repeat to attach Left Leg A2 to Modesty Panel Assembly. Install Glides H13 to the bottom of Legs A2 & A3. With the help of another person, turn desk upright onto its base. A3
A2
H13 (x4)
H5
Colored Dot
H5 (x6)
2
CORRIDOR 6521 EXECUTIVE DESK
bdiusa.com [email protected]
Step 4 - Insert Barrel Nut H7 into holes of Modesty Panel C10 with the elongated slot sitting horizontally, and secure with Screw H9 through side of Legs A2 & A3. Keep screws loose until Step 5.
H9 H7
C10
H9 H9
H7
H9 A3
H7 Elongated slot in Barrel Nut H7 aligns with Screw H9
A2
Step 5 - Secure Drawer Assembly A1 to Leg Assembly using Screw H8 and Hex Wrench T1. Insert Barrel Nut H7 into holes of Modesty Panel C10 with the elongated slot sitting vertically, and secure with Screw H10 through top of Drawer Assembly A1. Fully tighten all Screws that have been installed in previous steps using Hex Wrench.
H10 H10
H8 (x4) H8
H8 H8
A1
H10 H7
H7
3
CORRIDOR 6521 EXECUTIVE DESK
Elongated slot in Barrel Nut H7 aligns with Screw (P)
C10
bdiusa.com [email protected]
Step 6 - Insert Bumpers H11 in the center hole and outer holes of Drawer Assembly A1. With the fabric side facing up, insert Center Drawer Liner C13 into the center drawer and Side Drawer Liners C14 into both side drawers.
H11
H11
H11
H11 (x5)
H11
A1
C14 (x2)
C13 (x1)
Step 7 - With the help of another person gently lower Glass Panel C1 onto Drawer Assembly A1 and fasten into place using Screw H9 and Hex Wrench T1. DO NOT OVERTIGHTEN!
C1
A1
H9
H9
H9
H9 (x4)
4
CORRIDOR 6521 EXECUTIVE DESK
bdiusa.com [email protected]
Step 8 - Place Wire Management Lid C11 into opening in Glass Panel. Attach Removable Side Panels C12 to Legs A2 & A3 using screws H12 (and a Phillips screwdriver) ensuring the top edge of the Side Panel C12 sits against the top inside edge of Leg A2 & A3.
C11
H12 (x4) C12
C12
A3
A2
Step 9 - Place AC power strip/surge protector (not included) into Wire Management Trough A4.
A4
A4
5
CORRIDOR 6521 EXECUTIVE DESK
bdiusa.com [email protected]
bdiusa.com [email protected]
Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/
T1 4mm Hex Wrench H1 1/4-20 x 12mm Screw x 3 H5 1/4-20 x 32mm Screw x 6
Placement and Maintenance Corridor® Office furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth.
H7 Barrel Nut x 4 H8 1/4-20 x 15mm Screw x 4
Your Corridor® Office furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product.
H9 1/4-20 x 58mm Screw x 6 H10 1/4-20 x 87mm Screw x 2
Step 1 Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI retailer. C11 Wire Management Lid
H11 Bumper x 5 H12 10-32 x 37mm Screw x 4
C1 Glass Panel
H13 Leveler x 4
C10 Modesty Panel Tool Required: Phillips screwdriver
C12 Removable side panel x 2
A4 Wire Management Trough
A1 Drawer Assembly
C12 Removable side panel x 2
A3 Right Leg
C13 Center Drawer Liner x 1 A2 Left Leg
Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI Made in China. 12.08.2015 V2
C14 Side Drawer Liner x 2
Step 2 - Install Base Aligning the Colored Dots on the same side, attach Wire Management Trough A4 to Modesty Panel C8 using Screw H1 and Hex Wrench. Keep screws loose until Step 7.
A4
H1 (x3)
Colored Dots
C10
A4
C10
Step 3 - Match Colored Dot on Right Leg A3 with Colored Dot on Modesty Panel Assembly and attach using Screws H5 and Hex Wrench T1. Keep screws loose until Step 5. Repeat to attach Left Leg A2 to Modesty Panel Assembly. Install Glides H13 to the bottom of Legs A2 & A3. With the help of another person, turn desk upright onto its base. A3
A2
H13 (x4)
H5
Colored Dot
H5 (x6)
2
CORRIDOR 6521 EXECUTIVE DESK
bdiusa.com [email protected]
Step 4 - Insert Barrel Nut H7 into holes of Modesty Panel C10 with the elongated slot sitting horizontally, and secure with Screw H9 through side of Legs A2 & A3. Keep screws loose until Step 5.
H9 H7
C10
H9 H9
H7
H9 A3
H7 Elongated slot in Barrel Nut H7 aligns with Screw H9
A2
Step 5 - Secure Drawer Assembly A1 to Leg Assembly using Screw H8 and Hex Wrench T1. Insert Barrel Nut H7 into holes of Modesty Panel C10 with the elongated slot sitting vertically, and secure with Screw H10 through top of Drawer Assembly A1. Fully tighten all Screws that have been installed in previous steps using Hex Wrench.
H10 H10
H8 (x4) H8
H8 H8
A1
H10 H7
H7
3
CORRIDOR 6521 EXECUTIVE DESK
Elongated slot in Barrel Nut H7 aligns with Screw (P)
C10
bdiusa.com [email protected]
Step 6 - Insert Bumpers H11 in the center hole and outer holes of Drawer Assembly A1. With the fabric side facing up, insert Center Drawer Liner C13 into the center drawer and Side Drawer Liners C14 into both side drawers.
H11
H11
H11
H11 (x5)
H11
A1
C14 (x2)
C13 (x1)
Step 7 - With the help of another person gently lower Glass Panel C1 onto Drawer Assembly A1 and fasten into place using Screw H9 and Hex Wrench T1. DO NOT OVERTIGHTEN!
C1
A1
H9
H9
H9
H9 (x4)
4
CORRIDOR 6521 EXECUTIVE DESK
bdiusa.com [email protected]
Step 8 - Place Wire Management Lid C11 into opening in Glass Panel. Attach Removable Side Panels C12 to Legs A2 & A3 using screws H12 (and a Phillips screwdriver) ensuring the top edge of the Side Panel C12 sits against the top inside edge of Leg A2 & A3.
C11
H12 (x4) C12
C12
A3
A2
Step 9 - Place AC power strip/surge protector (not included) into Wire Management Trough A4.
A4
A4
5
CORRIDOR 6521 EXECUTIVE DESK
bdiusa.com [email protected]
