Current Transducers: 0-5VDC Analog Output - Kele
CURRENT MONITORING LOAD TRENDING WITH 0-5VDC OUTPUT
9EAR
7ARRANTY
H722HC
Current Transducers: 0-5VDC Analog Output The Hawkeye 722, 822, and 922 provide accurate load trending information with a proportional 0-5VDC output signal. Slide-switches provide easy field selection of monitored amperage range without jumpers (available on most models).
APPLICATIONS Load trending Motor control High current monitoring in a solid-core housing
Positive proof of flow
EXAMPLE LINEAR OUTPUT
H722LC
Scale software as shown
Low current monitoring in a solid-core housing
SENSOR OUTPUT
5 VDC
H822
0 VDC
0A
Self-powered analog current sensor simplifies installation No external power required for sensor...eliminate power supplies Self-gripping split-core for fast retrofit installation... no need to remove conductor (H922) Economical solid-core models feature adjustable bracket for easy alignment No jumpers on unit...reduces installation error Selectable factory calibrated ranges for increased flexibility and resolution Some models available with three fieldselectable ranges per unit...fewer versions to choose from, stock, and install Removable mounting bracket for installation flexibility Bracket on H922 can be installed in three different configurations...added flexibility 100% solid state, no moving parts to fail 5-year limited warranty
Selected Range* SENSED AMPS *Factory calibrated ranges selected with the amperage range switch
10A current monitoring in a mini solid-core housing
H822-20 Maximize Reliability Minimize Installed Cost
20A current monitoring in a mini solid-core housing H922 Series
Wide range current monitoring in a split-core housing
SPECIFICATIONS Sensor Power Insulation Class Frequency Temperature Range Humidity Range Accuracy Response Time Terminal Block Maximum Wire Size Terminal Block Torque (nominal) Agency Approvals
Induced from monitored conductor 600VAC RMS (UL), 300VAC RMS (CE) 50/60Hz nominal -15° to 60°C (5° to 140°F) 10-90% RH, non-condensing ±2% F.S. from 10% to 100% (selected range) 2 sec. 14 AWG 4 in-lbs (0.45 N-m) UL 508 open device listing CE:EN61010-1:2001-2, CAT III, deg. 2, basic insulation
For applications requiring double or reinforced insulation, please contact the factory
42
800.354.8556
503.598.4564
www.veris.com
©2008 Veris Industries
CURRENT MONITORING DIMENSIONAL DRAWINGS H722LC/H722HC
H822/H822-20
Removable/Adjustable Mounting Bracket
Removable/Adjustable Mounting Bracket 0.9" (23 mm)
ø 0.7" (18 mm)
0.9" (23 mm)
2.8" (71 mm)
0.7" Dia (19 mm)
*
3.0" (75 mm)
1.7 (43 mm)
0.4” x 0.2” Slot (x2)
*
2.8" (68 mm) 1.1" * (27 mm)
1.1" (27 mm)
2.3" (58 mm)
0.2” x 0.15” slot (2x)
*
3.8" (95 mm) 4.2" (106 mm)
H922 Removable Mounting Bracket 1.0” (25 mm) 1.1” (26 mm)
0.8” (21 mm)
APPLICATION/WIRING EXAMPLE
Bracket can be mounted on either side for added installation flexibility.
Monitoring Fan /Pump Motors for Positive Proof of Flow
* (793.1” mm) Self-gripping Iris
2.8” (70 mm)
1.4” (36 mm)
Ø = 0.3” (8 mm)
CONTACTOR CONTROLLER
*
Analog Input
2.5” (64 mm)
0-5 VDC
3.0” (76 mm)
* Terminal block may extend up to 1/8”; slide switch may extend up to 1/4” over the height dimensions shown.
MOTOR
ORDERING INFORMATION MODEL
AMPERAGE RANGE
H722LC H722HC H822 H822-20 H922
0 - 10/20/40A 0 - 50/100/200A 0 - 10A 0 - 20A 0 - 30/60/120A
H922030A H922060A H922120A
0 - 30A 0 - 60A 0 - 120A
SENSOR OUTPUT HOUSING
UL
CE
Solid-Core Solid-Core Solid-Core Solid-Core Split-Core
n
n
n
n
0 - 5VDC
Split-Core Split-Core Split-Core 4
Fan or Pump
n n n
n n4 n4 n4
Products provide reinforced insulation and 600VAC RMS insulation class.
ACCESSORIES DIN Rail Clip Set, DIN Rail, and DIN Stop Clip...see page 219.
800.354.8556
503.598.4564
www.veris.com
©2008 Veris Industries
43
9EAR
7ARRANTY
H722HC
Current Transducers: 0-5VDC Analog Output The Hawkeye 722, 822, and 922 provide accurate load trending information with a proportional 0-5VDC output signal. Slide-switches provide easy field selection of monitored amperage range without jumpers (available on most models).
APPLICATIONS Load trending Motor control High current monitoring in a solid-core housing
Positive proof of flow
EXAMPLE LINEAR OUTPUT
H722LC
Scale software as shown
Low current monitoring in a solid-core housing
SENSOR OUTPUT
5 VDC
H822
0 VDC
0A
Self-powered analog current sensor simplifies installation No external power required for sensor...eliminate power supplies Self-gripping split-core for fast retrofit installation... no need to remove conductor (H922) Economical solid-core models feature adjustable bracket for easy alignment No jumpers on unit...reduces installation error Selectable factory calibrated ranges for increased flexibility and resolution Some models available with three fieldselectable ranges per unit...fewer versions to choose from, stock, and install Removable mounting bracket for installation flexibility Bracket on H922 can be installed in three different configurations...added flexibility 100% solid state, no moving parts to fail 5-year limited warranty
Selected Range* SENSED AMPS *Factory calibrated ranges selected with the amperage range switch
10A current monitoring in a mini solid-core housing
H822-20 Maximize Reliability Minimize Installed Cost
20A current monitoring in a mini solid-core housing H922 Series
Wide range current monitoring in a split-core housing
SPECIFICATIONS Sensor Power Insulation Class Frequency Temperature Range Humidity Range Accuracy Response Time Terminal Block Maximum Wire Size Terminal Block Torque (nominal) Agency Approvals
Induced from monitored conductor 600VAC RMS (UL), 300VAC RMS (CE) 50/60Hz nominal -15° to 60°C (5° to 140°F) 10-90% RH, non-condensing ±2% F.S. from 10% to 100% (selected range) 2 sec. 14 AWG 4 in-lbs (0.45 N-m) UL 508 open device listing CE:EN61010-1:2001-2, CAT III, deg. 2, basic insulation
For applications requiring double or reinforced insulation, please contact the factory
42
800.354.8556
503.598.4564
www.veris.com
©2008 Veris Industries
CURRENT MONITORING DIMENSIONAL DRAWINGS H722LC/H722HC
H822/H822-20
Removable/Adjustable Mounting Bracket
Removable/Adjustable Mounting Bracket 0.9" (23 mm)
ø 0.7" (18 mm)
0.9" (23 mm)
2.8" (71 mm)
0.7" Dia (19 mm)
*
3.0" (75 mm)
1.7 (43 mm)
0.4” x 0.2” Slot (x2)
*
2.8" (68 mm) 1.1" * (27 mm)
1.1" (27 mm)
2.3" (58 mm)
0.2” x 0.15” slot (2x)
*
3.8" (95 mm) 4.2" (106 mm)
H922 Removable Mounting Bracket 1.0” (25 mm) 1.1” (26 mm)
0.8” (21 mm)
APPLICATION/WIRING EXAMPLE
Bracket can be mounted on either side for added installation flexibility.
Monitoring Fan /Pump Motors for Positive Proof of Flow
* (793.1” mm) Self-gripping Iris
2.8” (70 mm)
1.4” (36 mm)
Ø = 0.3” (8 mm)
CONTACTOR CONTROLLER
*
Analog Input
2.5” (64 mm)
0-5 VDC
3.0” (76 mm)
* Terminal block may extend up to 1/8”; slide switch may extend up to 1/4” over the height dimensions shown.
MOTOR
ORDERING INFORMATION MODEL
AMPERAGE RANGE
H722LC H722HC H822 H822-20 H922
0 - 10/20/40A 0 - 50/100/200A 0 - 10A 0 - 20A 0 - 30/60/120A
H922030A H922060A H922120A
0 - 30A 0 - 60A 0 - 120A
SENSOR OUTPUT HOUSING
UL
CE
Solid-Core Solid-Core Solid-Core Solid-Core Split-Core
n
n
n
n
0 - 5VDC
Split-Core Split-Core Split-Core 4
Fan or Pump
n n n
n n4 n4 n4
Products provide reinforced insulation and 600VAC RMS insulation class.
ACCESSORIES DIN Rail Clip Set, DIN Rail, and DIN Stop Clip...see page 219.
800.354.8556
503.598.4564
www.veris.com
©2008 Veris Industries
43
