Elvacite® 2614 - Lucite International
Elvacite® 2614 Acrylic Resin Elvacite® 2614 is a low molecular weight methyl methacrylate / n-butyl metacrylate copolymer. It is a fast-dissolving, low viscosity grade with quick solvent release for use in industrial lacquers, aerosols, inks, and coatings for plastics. Elvacite ® 2614 is softer that the methyl methacrylate grades. Elvacite® 2614 is a low odor version of Elvacite® 2013.
Performance Features and Key Benefits
Fast-dissolving grade for use in aerosols, industrial lacquers, inks, and coatings. Low viscosity Fast solvent release Low odor applications
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 1
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Typical Properties & Manufacturers Release Specifications Typical Propertiesa of Elvacite® 2614 Appearance
Solid bead
Specific Gravity, 25° C
1.15
Glass Transition Temp, onset
79°C
Molecular Weight (Mw)
56,000
Acid Number
14
Tukon Hardness, Knoop No.
13
Tensile Strength, psi
1,600
Elongation at break (23°C, 50% RH)
0.5%
a) Typical physical properties listed are approximate values and should not be considered manufacturers release specifications. Manufacturers release specifications are subject to change without notice, please contact your Lucite International Representative for the latest product specification details.
Elvacite® 2614 Manufacturers Release Specificationsb Inherent Viscosityc
0.190 – 0.215
% Moisture (max)
0.35
% Methacrylic Acid
2.0 – 2.4
b) c)
Manufacturers release specifications are subject to change without notice. Please contact Lucite International, Inc. for the latest information. Inherent viscosity of a solution containing 0.25 g polymer in 50 ml of methylene chloride measured at 20°C using a No. 50 Cannon-Fenske viscometer
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 2
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Preparing Solutions Elvacite® resins dissolve at room temperature but require constant agitation to prevent solvent-swollen granules of polymer from forming agglomerates and sticking to the walls of the vessel. Important: The polymer beads should be sifted directly into the vortex of the stirred solvent to speed wetting-out and dispersion. Continuous lowshear agitation for periods of 1-12 hours, depending on the grade and concentration of resin, is recommended. After the solution appears clear in the tank, a sample should be spread out on a Leneta card or glass. After the solvent evaporates and a film forms on the card or glass, there should not be any resin seeds. If there are any seeds, the tank should be agitated further to fully dissolve the resin. Tank agitation should not be stopped (except for sampling) until the film test indicates there are no resin seeds. Any cloudiness or residue may indicate that some polymer remains undissolved. The presence of water in the system can also cause cloudiness. Solution time can be reduced by heating; most common solvents can be heated to approximately 49°C (120°F) without the need for reflux equipment. High-shear agitation also cuts dissolving time, but requires care to avoid overheating and excessive solvent loss.
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 3
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Solvent Solubility Table I depicts the solubility of Elvacite® 2614 at 20% solids in various solvents. Table I: Solubility of Elvacite® 2614 (S=Soluble, C=Cloudy solution, I=Insoluble) Alcohols Methyl Alcohol Ethyl Alcohol n-propyl alcohol Isopropyl alcohol Isoamyl alcohol Cyclohexanol Ethylene glycol Glycerol
I I I I I I I I
Amides Formamide I Dimethyl formamide (DMF) S Chlorohydrocarbons Methylene Chloride S Ethylene dichloride S Perchloroethylene C 1,1,1-Trichloroethane S Esters Methyl Formate Ethyl acetate
S S
Technical Data Sheet
Isopropyl acetate n-Butyl acetate n-Amyl acetate Butyl lactate Propylene glycol monoethyl ether acetate Methyl amyl acetate Ethers Diethyl Ether Diisopropyl ether Tetrahydrofuran (THF) “Cellosolve” Solvent Hydrocarbons Toluene Xylene n-Hexane Cyclohexane VM & P Naphtha Mineral Spirits Turpentine
S S S S S S C I S S S S I I I I I
Elvacite® 2614 v20130618
Ketones Acetone Methyl Ethyl Ketone Methyl Isobutyl Ketone Diisobutyl ketone Cyclohexanone Isophorone Diacetone Alcohol Methyl amyl ketone
S S S S S S S S
Nitrile Acetonitrile
S
Nitroparaffins Nitromethane Nitroethane
S S
Vegetable Oils Castor oil Linseed oil (alkali-refined)
I I
Page: 4
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Viscosity and Gloss Elvacite® 2614 is a low molecular weight methyl methacrylate / n-butyl methacrylate copolymer. Table II illustrates typical viscosities of Elvacite® 2614 by varying both solvetn and resin concentration. Table II: Elvacite® 2614 Viscosity (cP) Concentration (% Solids) Solvent
20%
30%
40%
------25
40 22 45 200
250 80 270 2200
Toluene Methyl Ethyl Ketone Isopropyl Acetate Cellosolve Solvent
Resin Compatibility Elvacite® 2614 is compatible with the following Elvacite® Resin Grades: 2008, 2009, 2010, 2014, 2016, 2028, 2021, 2041, 2042, and 2043. It is also compatible with the other types of resins, as illustrated in the following table: Blending Resin Alkyd Aroplaz 1271 Aroplaz 1351 Chempol 13-1410 Paraplex RGA-2/80 Blagden 3105 Cellulosic Cellulose acetate 39-5-5B
Form of Blended Resin Tested
Description
Long linseed drying oil Long castor nondrying oil Safflower drying oil, acrylate modified Nondrying oil, sebacic Short coconut nondrying oil
Cellulose Acetate Butyrate, ½ - sec. Ethyl Cellulose N-7
Technical Data Sheet
30% in MEK 30% in MEK 50% in Xylene 80% in nBuAc 60% in Xylene
Supplier
Reichold Reichold Cook Composites & Polymer C P Hall Co. Blagden Chemicals Ltd
Elvacite / Blending Resin (by solids weight) 75/25 50/50 25/75 C H H C C C C C C I ---
I H
I H
30% in Acetone or Hercules Inc. MEK 30% in MEK Eastman Chemical
I
I
I
C
C
C
30% in MEK
I
I
I
Hercules Inc.
Elvacite® 2614 v20130618
Page: 5
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Nitrocellulose “RS”, ½-sec Isopropyl Epoxy Epon 828 Epon 1001 Elastomers EMD-504 Hypalon 30 Neoprene AC-Soft Rosin Derivatives Ester Gum 8L Pentalyn 255 Pentalyn 830 Vinyl Chloride Resins UCAR Solution Vinyl VAGH UCAR Solution Vinyl VMCH UCAR Solution Vinyl VYHH UCAR Solution Vinyl VYNS Exon 450 Exon 9290 Geon 103 EP Other Types Arochem 650 Aroset 4110 Dammar DC-840 Parlon S 10 Piccoumaron Santolite MHP Shellac Super-Bechacite 2000 Uformite MX-61
MEK/alcohol soln.
Hercules Inc.
C
C
C
100% Resin 30% in MEK
Resolution Resolution
C C
--C
C C
Polyisobutylene Clorosulfonated polyethylene Polychloroprene
30% in Toluene 15% in Toluene 15% in Toluene
Exxon Chemical Dupont Polymers Dupont Polymers
I I I
I I I
-------
Pentaerythritol ester Pentaerythritol ester
30% in MEK 30% in MEK 30% in MEK
Hercules Inc. Hercules Inc. Hercules Inc.
--H H
H H H
H H H
Copolymer Copolymer Copolymer Copolymer Copolymer Homopolymer Homopolymer
30% in MEK 30% in MEK 30% in MEK 15% in MEK 15% in MEK 15% in THF 15% in THF
Union Carbide Union Carbide Union Carbide Union Carbide Freestone Plastics Freestone Plastics B.F. Goodrich
C C C C C C C
C C C C C C C
C C C C --C C
Maleic-modified hard resin Acrylic resin
30% in MEK 30% in MEK 30% in Toluene 60% in Toluene 30% in MEK 30% in MEK 30% in MEK 30% in Methanol 30% in MEK 30% in MEK
Reichold Reichold
C C I C C C C H C C
C C I C C C C I C H
C C H C C C C I C I
Silicone resin Chlorinated rubber Coumarone-indene resin Sulfonamide-formaldehyde Permanently fusible phenolic Triazine-formaldehyde resin
Dow Corning Corp. Hercules Inc. Hercules Inc. Monsanto Co. Reichold Chemicals Rohm & Haas Co.
(C=Clear solution, H=Hazy solution, I=Insoluble)
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 6
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Plasticizer Compatibility Elvacite® 2614 is compatible at a 50/50 resin/plasticizer ratio with the following plasticizers: Dibutyl phthalate Di-(2-ethylhexyl) azelate Santicizer 8 (N-ethyl toluene sulphonamides) Santicizer 97 (dialkyl adipate) Santicizer 160 (butyl benzyl phthalate) Santicizer 261 (isooctyl benzyl phthalate) Santicizer 278 (benzyl phthalate) Santicizer B-16 (butyl phthalyl butyl glycolate) It is compatible at a 90/10 resin/plasticizer ratio, but incompatible at 50/50 with: Abalyn (methyl abietate) Dibutyl sebacate Hercoflex 600 (pentaerythritol ester) Hercoflex 707 (polyol ester) It is incompatible with Resoflex R-296 (alkyd) at a 9010 resin/plasticizer ratio.
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 7
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Typical Formulations The following formulation is given as a starting point only. The final formulation will be determined by the coating properties desired.
Ingredients
Automotive Refinish Clear Lacquer (#B2-2) % by Wt
Elvacite® 2614 CAB 381 – 2 Butyl Benzyl Phthalate Methyl Isobutyl Ketone Isopropyl Alcohol Toluene Methyl Amyl Ketone
Technical Data Sheet
24.10 8.05 8.05 14.96 5.97 35.26 3.61 100.00
Elvacite® 2614 v20130618
Page: 8
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Lucite International Inc. The Lucite Center 7275 Goodlett Farms Parkway Cordova, TN 38016 USA T: +1 (901) 381 2000 www.luciteinternational.com/resins Lucite International Specialty Polymers and Resins Ltd Horndale Avenue Newton Aycliffe DL5 6YE United Kingdom T: +44 (0) 1325 300990 F: +44 (0) 1325 314925 www.luciteinternational.com/resins
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 9
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Performance Features and Key Benefits
Fast-dissolving grade for use in aerosols, industrial lacquers, inks, and coatings. Low viscosity Fast solvent release Low odor applications
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 1
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Typical Properties & Manufacturers Release Specifications Typical Propertiesa of Elvacite® 2614 Appearance
Solid bead
Specific Gravity, 25° C
1.15
Glass Transition Temp, onset
79°C
Molecular Weight (Mw)
56,000
Acid Number
14
Tukon Hardness, Knoop No.
13
Tensile Strength, psi
1,600
Elongation at break (23°C, 50% RH)
0.5%
a) Typical physical properties listed are approximate values and should not be considered manufacturers release specifications. Manufacturers release specifications are subject to change without notice, please contact your Lucite International Representative for the latest product specification details.
Elvacite® 2614 Manufacturers Release Specificationsb Inherent Viscosityc
0.190 – 0.215
% Moisture (max)
0.35
% Methacrylic Acid
2.0 – 2.4
b) c)
Manufacturers release specifications are subject to change without notice. Please contact Lucite International, Inc. for the latest information. Inherent viscosity of a solution containing 0.25 g polymer in 50 ml of methylene chloride measured at 20°C using a No. 50 Cannon-Fenske viscometer
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 2
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Preparing Solutions Elvacite® resins dissolve at room temperature but require constant agitation to prevent solvent-swollen granules of polymer from forming agglomerates and sticking to the walls of the vessel. Important: The polymer beads should be sifted directly into the vortex of the stirred solvent to speed wetting-out and dispersion. Continuous lowshear agitation for periods of 1-12 hours, depending on the grade and concentration of resin, is recommended. After the solution appears clear in the tank, a sample should be spread out on a Leneta card or glass. After the solvent evaporates and a film forms on the card or glass, there should not be any resin seeds. If there are any seeds, the tank should be agitated further to fully dissolve the resin. Tank agitation should not be stopped (except for sampling) until the film test indicates there are no resin seeds. Any cloudiness or residue may indicate that some polymer remains undissolved. The presence of water in the system can also cause cloudiness. Solution time can be reduced by heating; most common solvents can be heated to approximately 49°C (120°F) without the need for reflux equipment. High-shear agitation also cuts dissolving time, but requires care to avoid overheating and excessive solvent loss.
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 3
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Solvent Solubility Table I depicts the solubility of Elvacite® 2614 at 20% solids in various solvents. Table I: Solubility of Elvacite® 2614 (S=Soluble, C=Cloudy solution, I=Insoluble) Alcohols Methyl Alcohol Ethyl Alcohol n-propyl alcohol Isopropyl alcohol Isoamyl alcohol Cyclohexanol Ethylene glycol Glycerol
I I I I I I I I
Amides Formamide I Dimethyl formamide (DMF) S Chlorohydrocarbons Methylene Chloride S Ethylene dichloride S Perchloroethylene C 1,1,1-Trichloroethane S Esters Methyl Formate Ethyl acetate
S S
Technical Data Sheet
Isopropyl acetate n-Butyl acetate n-Amyl acetate Butyl lactate Propylene glycol monoethyl ether acetate Methyl amyl acetate Ethers Diethyl Ether Diisopropyl ether Tetrahydrofuran (THF) “Cellosolve” Solvent Hydrocarbons Toluene Xylene n-Hexane Cyclohexane VM & P Naphtha Mineral Spirits Turpentine
S S S S S S C I S S S S I I I I I
Elvacite® 2614 v20130618
Ketones Acetone Methyl Ethyl Ketone Methyl Isobutyl Ketone Diisobutyl ketone Cyclohexanone Isophorone Diacetone Alcohol Methyl amyl ketone
S S S S S S S S
Nitrile Acetonitrile
S
Nitroparaffins Nitromethane Nitroethane
S S
Vegetable Oils Castor oil Linseed oil (alkali-refined)
I I
Page: 4
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Viscosity and Gloss Elvacite® 2614 is a low molecular weight methyl methacrylate / n-butyl methacrylate copolymer. Table II illustrates typical viscosities of Elvacite® 2614 by varying both solvetn and resin concentration. Table II: Elvacite® 2614 Viscosity (cP) Concentration (% Solids) Solvent
20%
30%
40%
------25
40 22 45 200
250 80 270 2200
Toluene Methyl Ethyl Ketone Isopropyl Acetate Cellosolve Solvent
Resin Compatibility Elvacite® 2614 is compatible with the following Elvacite® Resin Grades: 2008, 2009, 2010, 2014, 2016, 2028, 2021, 2041, 2042, and 2043. It is also compatible with the other types of resins, as illustrated in the following table: Blending Resin Alkyd Aroplaz 1271 Aroplaz 1351 Chempol 13-1410 Paraplex RGA-2/80 Blagden 3105 Cellulosic Cellulose acetate 39-5-5B
Form of Blended Resin Tested
Description
Long linseed drying oil Long castor nondrying oil Safflower drying oil, acrylate modified Nondrying oil, sebacic Short coconut nondrying oil
Cellulose Acetate Butyrate, ½ - sec. Ethyl Cellulose N-7
Technical Data Sheet
30% in MEK 30% in MEK 50% in Xylene 80% in nBuAc 60% in Xylene
Supplier
Reichold Reichold Cook Composites & Polymer C P Hall Co. Blagden Chemicals Ltd
Elvacite / Blending Resin (by solids weight) 75/25 50/50 25/75 C H H C C C C C C I ---
I H
I H
30% in Acetone or Hercules Inc. MEK 30% in MEK Eastman Chemical
I
I
I
C
C
C
30% in MEK
I
I
I
Hercules Inc.
Elvacite® 2614 v20130618
Page: 5
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Nitrocellulose “RS”, ½-sec Isopropyl Epoxy Epon 828 Epon 1001 Elastomers EMD-504 Hypalon 30 Neoprene AC-Soft Rosin Derivatives Ester Gum 8L Pentalyn 255 Pentalyn 830 Vinyl Chloride Resins UCAR Solution Vinyl VAGH UCAR Solution Vinyl VMCH UCAR Solution Vinyl VYHH UCAR Solution Vinyl VYNS Exon 450 Exon 9290 Geon 103 EP Other Types Arochem 650 Aroset 4110 Dammar DC-840 Parlon S 10 Piccoumaron Santolite MHP Shellac Super-Bechacite 2000 Uformite MX-61
MEK/alcohol soln.
Hercules Inc.
C
C
C
100% Resin 30% in MEK
Resolution Resolution
C C
--C
C C
Polyisobutylene Clorosulfonated polyethylene Polychloroprene
30% in Toluene 15% in Toluene 15% in Toluene
Exxon Chemical Dupont Polymers Dupont Polymers
I I I
I I I
-------
Pentaerythritol ester Pentaerythritol ester
30% in MEK 30% in MEK 30% in MEK
Hercules Inc. Hercules Inc. Hercules Inc.
--H H
H H H
H H H
Copolymer Copolymer Copolymer Copolymer Copolymer Homopolymer Homopolymer
30% in MEK 30% in MEK 30% in MEK 15% in MEK 15% in MEK 15% in THF 15% in THF
Union Carbide Union Carbide Union Carbide Union Carbide Freestone Plastics Freestone Plastics B.F. Goodrich
C C C C C C C
C C C C C C C
C C C C --C C
Maleic-modified hard resin Acrylic resin
30% in MEK 30% in MEK 30% in Toluene 60% in Toluene 30% in MEK 30% in MEK 30% in MEK 30% in Methanol 30% in MEK 30% in MEK
Reichold Reichold
C C I C C C C H C C
C C I C C C C I C H
C C H C C C C I C I
Silicone resin Chlorinated rubber Coumarone-indene resin Sulfonamide-formaldehyde Permanently fusible phenolic Triazine-formaldehyde resin
Dow Corning Corp. Hercules Inc. Hercules Inc. Monsanto Co. Reichold Chemicals Rohm & Haas Co.
(C=Clear solution, H=Hazy solution, I=Insoluble)
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 6
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Plasticizer Compatibility Elvacite® 2614 is compatible at a 50/50 resin/plasticizer ratio with the following plasticizers: Dibutyl phthalate Di-(2-ethylhexyl) azelate Santicizer 8 (N-ethyl toluene sulphonamides) Santicizer 97 (dialkyl adipate) Santicizer 160 (butyl benzyl phthalate) Santicizer 261 (isooctyl benzyl phthalate) Santicizer 278 (benzyl phthalate) Santicizer B-16 (butyl phthalyl butyl glycolate) It is compatible at a 90/10 resin/plasticizer ratio, but incompatible at 50/50 with: Abalyn (methyl abietate) Dibutyl sebacate Hercoflex 600 (pentaerythritol ester) Hercoflex 707 (polyol ester) It is incompatible with Resoflex R-296 (alkyd) at a 9010 resin/plasticizer ratio.
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 7
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Typical Formulations The following formulation is given as a starting point only. The final formulation will be determined by the coating properties desired.
Ingredients
Automotive Refinish Clear Lacquer (#B2-2) % by Wt
Elvacite® 2614 CAB 381 – 2 Butyl Benzyl Phthalate Methyl Isobutyl Ketone Isopropyl Alcohol Toluene Methyl Amyl Ketone
Technical Data Sheet
24.10 8.05 8.05 14.96 5.97 35.26 3.61 100.00
Elvacite® 2614 v20130618
Page: 8
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Lucite International Inc. The Lucite Center 7275 Goodlett Farms Parkway Cordova, TN 38016 USA T: +1 (901) 381 2000 www.luciteinternational.com/resins Lucite International Specialty Polymers and Resins Ltd Horndale Avenue Newton Aycliffe DL5 6YE United Kingdom T: +44 (0) 1325 300990 F: +44 (0) 1325 314925 www.luciteinternational.com/resins
Technical Data Sheet
Elvacite® 2614 v20130618
Page: 9
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
