Freeform 2 Table Runner

Report 8 Downloads 121 Views
Freeform 2 Table Runner First, be sure you purchase the correct table runner either from Jeannie, or Sweetpea.com. We will be doing the Freeform 2 table runner. If you choose the other Freedom runner its ok. The supply list is based on the Freeform 2 needs. Get your pattern AHEAD of time to get cutting done before class. This is most helpful and getting more work done in class. Choose fabrics that will complement each other. It is not recommend to use large print or busy fabric. I like to use fat quarters. There are 5 different panels to make. Each panel will need 2 different colors (if you like). Or use 5 colors and mix them up. I used only 2 with the sample. Your choice The pattern supplies 3 different hoops sizes. 5 x 7, 6 x 10, 7 x 12 Supplies listed below are based on the large 7 x 12 size hoop. Your choice in the size you wish to make.

Fabric:

* 2 to 10 different colors. Fat quarters work well here. Unless you want it all one color.

* Stabilizer: * Backing:

You will need enough for 5 hooping’s. I used No Show Mesh.

1½ yards

* Batting: 1¾ yards. I used Battleizer.

Embroidery Machine, Embroidery arm, Embroidery foot, power cord, extra needles, hoop of the size you are making. USB with design or we will load yours here General sewing supplies; scissors, applique scissors, rotary cutter, pins, bobbins, embroidery thread, fabric stiffener, etc.

Note * means items available for purchase from Richland Sewing Center. Samples at the store are in black & white--check RSC Facebook for more color ideas!