Graco Literider Classic Connect Front Wheel Replacement

Graco Literider Classic Connect Front Wheel Replacement

Graco Literider Classic Connect Front Wheel Replacement This guide will show you how to remove the front wheels.

Written By: Tyler Laird

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Graco Literider Classic Connect Front Wheel Replacement

INTRODUCTION This guide will help you replace the front wheels. A small metal tool is required to remove the wheels. A key or screwdriver will work.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Graco Literider Classic Connect Front Wheel Replacement

Step 1 — Front Wheel 

Flip the stroller over so that the wheels are facing upward.



Pull the sleeve covering the base of the wheel back from the wheels to expose the small metal button.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Graco Literider Classic Connect Front Wheel Replacement

Step 3 

Use a key or other thin object to push down the button holding the wheel in place.



Pull the wheel off the frame.

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-09-06 08:31:52 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4