grooved fire products
GROOVED FIRE PRODUCTS Price Sheet SPF.GRFP-12.17C | Effective: December 4, 2017 | Cancels Price Sheet SPF.GRFP-5.17C of May 1, 2017
FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. All shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer’s account. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s website at www.anvilintl.com. •P ricing is subject to change without notice. Go to Anvil’s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
NATIONAL TOLL FREE HOTLINE
80 0 - 6 61-89 98
www.anvilintl.com
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Please refer to Anvil International's Canadian Return Material Policy (RMA) available on the website at www.anvilintl.com/CanadaRMA.
Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Buyer (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
4. SELLER’S LIABILITY:
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.
NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. All shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer’s account.
www.anvilintl.com
2
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Approvals For current certifications, listings and other approvals, visit Anvil’s website at www.anvilintl.com
Standard Gaskets - Your order must specify gasket grade TEMPERATURE RANGE
COMPOUND (COLOR STRIPE)
E
(type A)
Ambient -40°F to +150°F (-40°C to +66°C)
EPDM (Purple)
Applicable for wet and dry (oil free air) sprinkler services.
E
-40°F to +230°F (-40°C to +110°C)
EPDM (Green)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
EP
-40°F to +250°F
EPDM (Green and Red)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
GRADE
GENERAL SERVICE APPLICATION
Standard Gasket
Flush Gasket
Bolts / Nuts U-Bolts
Carbon steel SAE grade 2. Zinc electroplated to ASTM A-164.
Oval Neck Track Head Bolts
Heat-treated to conform to ASTM A-183 minimum tensile strength 110,000 PSI with yield point of 80,000 PSI. Zinc electroplated to ASTM A-164.
Heavy Hex Nuts
SAE J995 Grade 2 or ASTM A536 Grade “A” or “B”. Zinc Electroplated to ASTM A-164.
Hex Flange Lock Nuts
Carbon steel per ASTM A-194. Zinc electroplates to ASTM A-164.
Housings & Fittings ASTM A-536
All ductile iron housings and fittings meet or exceed material conforming to ASTM A-536.
ASTM A-53 or A-135
All segmentally welded fittings std weight except E-9 and K-9 is SCH 10.
ASTM 234 WPB/ASA B16.9 ASTM A53 or A135
Forged Steel Fittings.
ASTM A-312/A-312M
Stainless steel fittings grade TP304L or TP316L.
ANSI/ASME
All MT-1 mechanical tees are NPT standard conforming to ANSI-ASME B1.20.1.
BS 21
All MT-8 mechanical tees are British parallel joining threads.
Finish
All grooved coupling housings and fittings are finished with a rust inhibiting orange paint. Hot dipped galvanizing per ASTM A-153 is also available upon request.
ASME/ANSI B16.1
F-3 grooved flange adapter drilling conforms to ASME/ANSI B16.1 for class 125 cast iron flanges.
Revised:
www.anvilintl.com
3
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Table of Contents Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Approvals, Gasket Material, Bolts / Nuts, Housing & Fittings . . . . . . . . . . . . . . . . . . . . . . . . 3 Couplings / Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7 C-1 Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-3 LW Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-4 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RC-2 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 F-3 Grooved Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 74FP SlideLOK Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fittings for Fire Protection (Short Body Fittings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SE-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ST-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Fittings for Grooved-End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–15 E-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-2 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-3 22½° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-4 11¼° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-9 90° Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 K-9 Drain Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SE-5 90° Reducing Elbow (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SK-1 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 F-2 Flange Nipple ANSI 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 X-1 Steel Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-2 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 T-3 Reducing Tee (Threaded Branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 R-1 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 R-2 Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 R-3 Concentric Reducer (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mechanical Branch Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–17 MT-1 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-2 Grooved Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-30 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Spare Parts / Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Revised:
www.anvilintl.com
4
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Couplings / Flange Adapter FIG. C-1 / C-3 (AMBIENT) LW FLEXIBLE COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 6 8 10 (C-1) 12 (C-1)
1.25 1.46 1.45 1.98 2.58 4.14 7.00 13.00 21.50 27.36
32 40 50 65 80 100 150 200 250 300
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV.
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2¼ ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 4¼ ⁷⁄₈ x 5½ ⁷⁄₈ x 5½
$12.62 $13.40 $14.36 $20.72 $23.82 $27.17 $46.84 $95.19 $401.66 $489.55
$31.38 $33.02 $26.20 $31.22 $37.02 $48.39 $108.20 $147.24 $573.94 $699.40
$23.85 $24.97 $26.80 $31.13 $42.61 $51.18 $89.93 $142.74 POA POA
$33.70 $35.34 $33.91 $43.87 $50.87 $55.08 $96.95 $153.78 POA POA
QUANTITY FOR “A” GASKET ONLY BOX CRATE 45 45 42 28 20 10 6 -
1,620 1,620 1,512 1,008 720 360 216 70 27 22
q — Sold in box only Standard Gasket
Flush Gasket
FIG. C-4 (AMBIENT) RIGID COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
Revised:
32 40 50 65 80 100 125 150 200 250 300
1.48 1.66 1.83 2.04 2.41 3.17 5.15 5.84 10.82 21.50 27.36
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ½x3 ½x3 ⁵ ⁄₈ x 3½ ⁷⁄₈ x 5 ⁄⁷ ₈ x 5½
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV.
$12.62 $13.40 $14.36 $20.72 $23.82 $27.17 $63.28 $46.84 $95.19 $342.90 $448.39
$31.38 $33.02 $26.20 $31.22 $37.02 $48.39 $100.18 $108.20 $147.24 $577.53 $748.38
www.anvilintl.com
$23.85 $24.97 $26.80 $31.13 $42.61 $51.18 $89.93 $142.74 -
$33.70 $35.34 $33.91 $43.87 $50.87 $55.08 $96.95 $153.78 -
QUANTITY FOR “A” GASKET ONLY BOX CRATE 40 40 30 28 20 10 7 6 1 -
1,440 1,440 1,080 1,008 720 360 252 216 80 27 22
5
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Couplings / Flange Adapter FIG. RC-2 REDUCING COUPLING NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 2 x1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
50 x 40 65 x 50 80 x 50 80 x 65 100 x 50 100 x 65 100 x 80 125 x 100 150 x 100 200 x150
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES)
WEIGHT EACH (LBS)
2 2 2 2 2 2 2 2 2 2
2.90 3.41 4.23 3.79 7.07 6.98 6.50 11.40 12.99 17.77
³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3¼ ⁷⁄₈ x 5
COUPLINGS COMPLETE WITH “E” GASKET PAINTED GALV.
$55.08 $55.08 $63.10 $61.48 $100.63 $89.92 $84.31 $136.62 $172.44 $258.92
$66.80 $99.00 $100.14 $85.83 $181.07 $142.54 $133.83 $418.54 $310.72 $466.37
BOX 24 18 16 16 8 8 8 4 1
QUANTITY CRATE 864 648 576 576 288 288 288 144 70
Note: Not recommended for Vacuum Service
q — Sold in box only
FIG. F-3 GROOVED FLANGE ADAPTER NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 5 6 8 10 12
50 65 80 100 125 150 200 250 300
3.20 4.60 5.70 7.90 9.20 10.00 15.70 47.00 69.00
COMPLETE WITH EPDM GASKET PAINTED GALV.
$78.90 $86.22 $156.06 $203.52 $217.70 $283.72 $353.11 $546.20 $1,013.06
$106.29 $116.03 $210.70 $274.75 $316.46 $383.02 $476.69 POA POA
BOX 12 10 10 8 6 -
QUANTITY CRATE 432 360 360 288 216 120 80 40 40
q — Sold in box only
SlideLOK® Coupling Fig. 74FP NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1 1/4 1 1/2 2 2 1/2 3 4
1.660 1.900 2.375 2.875 3.500 4.500
1.95 2.10 2.69 2.87 3.58 4.55
COMPLETE WITH EPDM GASKET PAINTED GALV. $22.50 $24.75 $27.50 $28.50 $34.25 $42.50
$26.50 $30.00 $35.50 $35.50 $42.75 $53.50
BOX
QUANTITY
22 20 15 15 12 10
CRATE
½ x 2½ ½ x 2½ ½ x 23/4 ½ x 2½ ½x3 ½ x 3½
q — Sold in box only
Revised:
www.anvilintl.com
6
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe (Short Body) FIG. SE-1 90° ELBOW PRICE EACH NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 2 2½ 3 4 6 8
50 65 80 100 150 200
WEIGHT EACH (LBS) 1.50 2.14 3.60 5.78 11.78 21.10
PAINTED $14.71 $21.35 $32.53 $46.00 $134.61 $265.31
QUANTITY
GALV.
BOX
CRATE
$23.36 $33.53 $49.49 $71.17 $207.26 $454.02
32 18 10 6 2 -
1,152 648 360 216 72 18
q — Sold in box only
FIG. ST-1 STRAIGHT TEE PRICE EACH NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 6 8
Revised:
50 65 80 100 150 200
2.90 4.60 6.90 10.90 25.00 42.10
QUANTITY
PAINTED
GALV.
BOX
CRATE
$22.89 $33.87 $47.68 $72.88 $179.28 $468.97
$40.93 $60.32 $78.24 $126.39 $283.90 $660.96
18 12 6 4 -
648 432 216 144 36 14
www.anvilintl.com
7
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. E-1 90° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.85 0.90 1.47 2.90 4.22 8.00 11.94 17.50 32.20 54.11 70.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$13.67 $13.80 $14.69 $26.46 $37.48 $53.59 $167.01 $155.01 $305.22 $900.29 $1,427.40
$27.46 $27.92 $29.58 $42.89 $61.13 $71.69 $238.51 $253.80 $478.52 $1,179.71 $2,057.50
60 50 28 15 9 4 2 2 -
2,160 1,800 1,008 540 324 144 72 72 15 8 4
q — Sold in box only
FIG. E-2 45° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.59 0.78 1.02 1.80 2.79 4.90 11.32 11.55 17.90 30.00 40.40
PRICE EACH PAINTED
$14.72 $15.21 $11.84 $15.31 $31.91 $47.07 $132.83 $132.83 $290.54 $747.38 $1,062.75
QUANTITY
GALV.
$24.14 $24.14 $27.39 $39.64 $56.56 $75.57 $231.46 $234.56 $442.26 $936.32 $1,297.52
BOX 90 60 36 24 12 8 2 2 -
CRATE 3,240 2,160 1,296 864 432 288 72 72 36 12 4
q — Sold in box only
Revised:
www.anvilintl.com
8
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. E-3* 22½° ELBOW
FIG. E-4* 11¹/₄° ELBOW
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.80 0.70 1.60 2.10 3.10 5.40 7.80 8.30 17.90 30.00 40.40
PRICE EACH PAINTED
GALV.
$94.20 $94.20 $94.20 $94.20 $109.64 $146.80 POA $415.50 $869.92 $748.33 $864.26
POA $113.19 $113.19 $113.19 $177.68 $237.83 POA $673.12 $1,409.54 POA POA
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
* Segmentally welded.
* Segmentally welded.
FIG. E-9 90° DRAIN ELBOW
FIG. K-9 DRAIN CAP
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.87 2.13 2.76 4.33 5.60 8.80 12.80 18.77 32.64 48.50 66.00
PRICE EACH PAINTED
GALV.
POA POA POA $168.14 $225.06 $233.70 POA $432.17 $652.19 $1,386.36 $2,133.31
$289.15 $289.15 $289.15 $289.15 $314.96 $355.39 $507.59 $558.56 $843.24 $1,980.60 $3,047.58
32 40 50 65 80 100 125 150 200 250 300
0.50 0.70 0.90 1.50 2.00 3.30 5.00 6.50 10.00 14.50 29.30
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8
32 40 50 65 80 100 125 150 200
0.71 0.76 0.83 1.06 1.27 2.92 3.40 4.02 6.66
PRICE EACH PAINTED
GALV.
$168.01 POA $168.01 $168.01 POA $261.96 POA $741.32 POA POA POA
POA POA POA POA POA POA POA POA POA POA POA
PRICE EACH PAINTED
GALV.
$228.84 $228.84 $228.84 $228.84 $268.28 $282.08 $411.27 $459.26 $543.91
$326.80 $326.80 $326.80 $326.80 $383.17 $403.04 $587.63 $656.19 $777.03
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
Revised:
www.anvilintl.com
9
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. SE-5 REDUCING 90° ELBOW GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼
1½
2
2½ 3
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x¾ x1
WEIGHT EACH (LBS) 0.50 0.54 0.60 0.63 0.70 0.80 0.84 0.93 1.04 1.18 1.30 1.50 2.20 2.50
PRICE EACH
QUANTITY
PAINTED $28.94 $25.47 $25.47 $25.47 $25.47 $25.47 $26.64 $27.87 $27.87 $27.15 $41.45 $41.45 $51.60 $41.45
BOX
CRATE
80 80 80 80 80 80 50 50 50 36 36 36 24 24
2,880 2,880 2,880 2,880 2,880 2,880 1,800 1,800 1,800 1,296 1,296 1,296 864 864
q — Sold in box only
FIG. SK-1 CAP NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 * 12 *
32 40 50 65 80 100 125 150 200 250 300
0.31 0.39 0.54 0.75 1.23 1.96 4.60 4.58 6.00 21.00 35.50
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$6.22 $7.63 $8.82 $10.74 $13.23 $20.21 $73.33 $55.25 $121.70 $244.08 $446.32
$11.65 $13.18 $13.81 $17.61 $28.25 $33.87 $114.58 $104.05 $182.96 $418.99 $675.59
180 150 100 70 45 25 12 6 -
6,480 5,400 3,600 2,520 1,620 900 432 216 70 50
* Sizes 10" and 12" are Fig. K-1 Design
Revised:
www.anvilintl.com
10
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe ◊ FIG. F-2* FLANGE NIPPLE ANSI 150 NOMINAL SIZE (INCHES) 2 2½ 3 4 5 6 8 10 12
FIG. X-1* STEEL CROSS PRICE EACH
NOMINAL SIZE WEIGHT EACH (MM) (LBS) 50 65 80 100 125 150 200 250 300
PAINTED
GALV.
POA POA POA POA POA POA POA POA POA
$519.26 $613.29 $662.12 $1,136.17 $1,129.11 $1,345.25 $1,791.39 $2,809.04 $3,844.16
6.20 9.90 11.00 47.00 40.00 50.00 60.00 60.00 91.00
PRICE EACH NOMINAL SIZE NOMINAL SIZE WEIGHT EACH (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
* Segmentally welded. ◊ Flange portion is 150# steel. Larger sizes available upon request.
32 40 50 65 80 100 125 150 200 250 300
2.00 2.20 2.80 3.30 4.50 6.60 9.30 14.50 28.50 40.50 57.00
PAINTED
GALV.
POA POA POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA
* Segmentally welded steel.
FIG. T-1 STRAIGHT TEE (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.40 1.46 2.18 3.30 6.41 9.92 17.93 22.00 42.10 72.73 91.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$19.74 $20.39 $31.73 $50.78 $58.86 $89.76 $282.42 $259.10 $518.62 $1,371.40 $2,415.05
$36.50 $36.50 $51.60 $70.51 $111.61 $158.45 $413.59 $443.02 $845.21 $1,568.24 $2,749.59
40 35 18 9 5 2 -
1,440 1,260 648 324 180 72 36 36 12 8 4
q — Sold in box only
Revised:
www.anvilintl.com
11
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. T-2 REDUCING TEE NOMINAL SIZE (INCHES) 2x2
2½ x 2½
3x3
4x4
5x5
6x6
8x8
Revised:
x 1* x 1¼ x1½ x1 x 1¼ x1½ x 2* x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½* x 3* x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x 2* x 2½* x 3* x 4* x 5* x 1½ x2 x 2½ x3 x 4* x5 x 6*
CONTINUED NOMINAL SIZE WEIGHT (MM) EACH (LBS)
50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 40 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150
2.60 3.00 3.00 4.40 4.40 4.40 4.40 6.05 6.05 6.05 6.05 6.05 10.98 10.98 10.98 10.98 12.28 11.99 13.95 13.95 13.95 13.95 13.95 13.95 13.95 25.25 25.25 25.25 23.54 22.79 24.95 24.20 25.39 42.16 42.16 42.16 42.16 41.54 24.80 39.51
PRICE EACH PAINTED
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $213.51 $213.51 $213.51 POA POA POA POA POA POA POA POA POA POA $505.81 $684.20 $505.81 $505.81 $682.33 POA POA POA POA $1,424.67 POA $1,424.67
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $343.21 $343.21 $343.21 POA POA POA POA POA POA POA POA POA POA $853.12 $853.12 $853.12 $853.12 POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES)
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV.
10 x 10
x2 x 2½ x3 x4 x5 x6 x8
250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x200
12 x 12
x3 x4 x5 x6 x8 x 10*
300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
69.25 69.25 69.25 69.25 69.25 35.60 69.25 100.00 101.60 100.00 100.00 100.00 101.60
POA POA POA POA POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA POA POA
* Ductile iron, all others segmentally welded.
www.anvilintl.com
12
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. T-3 REDUCING TEE W/ THREADED BRANCH NOMINAL SIZE (INCHES)
x ¾* x 1* 2x2 x1¼ x1½ x1 x 1¼ 2½ x 2½ x1½ x2 x 1* x 1¼ 3x3 x 1½* x2 x 2½ x 1* x 1¼ x 1½ 4x4 x2 x 2½ x3 x1 x 1¼ x2 5x5 x 2½ x3 x4 x1 x 1¼ x 1½ x2 6x6 x 2½ x3 x4 x5 x 1½ x2 x 2½ 8x8 x3 x4 x5 x6
Revised:
NOMINAL SIZE (MM)
WEIGHT EACH (LBS)
50 x 50 x 20 50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150
2.68 3.00 3.00 3.00 4.40 4.40 4.40 4.40 6.47 6.05 6.27 6.05 6.05 10.47 10.98 10.98 10.98 10.98 10.98 13.95 13.95 13.95 32.95 13.95 13.95 25.25 25.25 25.25 25.25 26.50 25.25 25.25 25.25 42.16 42.16 42.16 42.16 42.16 42.16 42.16
CONTINUED
PRICE EACH PAINTED
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES)
10 x 10
12 x 12
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x2 x 2½ x3 x4 x5 x6 x8 x 10
NOMINAL SIZE WEIGHT (MM) EACH (LBS) 250 x 250 x 40 250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x 200 300 x 300 x 50 300 x 300 x 65 300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
69.25 69.25 69.25 69.25 69.25 69.25 69.25 69.25 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00
PRICE EACH PAINTED
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
* Ductile iron, all others segmentally welded.
www.anvilintl.com
13
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. R-1 CONCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
Revised:
x1 x1 x 1¼ x 1* x 1¼* x 1½* x1 x 1¼ x 1½ x 2* x1 x 1¼ x 1½ x 2* x 2½* x1 x 1¼ x 1½* x 2* x 2½ x 3* x 3½ x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1½ x 2* x 2½* x 3* x 4* x5 x 1½ x2 x 2½ x 3* x 4* x5 x 6*
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 100 x 90 125 x 25 125 x 32 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
0.85 0.73 0.95 0.80 0.79 0.79 1.50 1.50 1.50 1.91 2.35 2.35 2.35 1.41 1.50 3.21 3.21 2.66 2.51 3.21 2.55 1.00 4.84 4.84 4.84 4.84 4.84 4.84 4.84 7.50 7.50 6.34 5.10 4.29 7.50 7.50 9.07 9.07 9.07 9.15 9.07 9.07 9.07
POA $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 POA POA POA $139.21 $139.21 $139.21 $139.21 POA POA $144.64 $144.64 $144.64 $144.64 $144.64 POA POA $258.72 $258.72 $258.72 $258.72 $258.72
POA POA POA $121.66 $121.66 $121.66 POA POA POA $121.66 POA POA POA $111.12 $138.39 POA POA POA $150.21 $185.24 POA $185.24 $264.81 $264.81 $264.81 POA POA POA $264.81 POA POA $349.79 POA $349.79 $317.42 $451.38 POA POA $633.00 POA $633.00 POA $799.85
NOMINAL SIZE (INCHES)
10
12
x 1½ x2 x 2½ x3 x4 x5 x6 x 8* x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
16.38 16.38 16.38 16.38 16.38 16.38 16.38 23.10 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
POA POA POA POA $534.17 POA $534.17 $534.17 POA POA POA POA $656.94 $656.94 $656.94 $656.94 $656.94
POA POA POA POA POA POA $1,627.33 POA POA POA POA POA POA $2,759.60 POA POA POA
* Ductile iron Segmentally welded through 4 x 3 unless *Ductile Iron. Forged Steel 5 x 1 and larger unless *Ductile Iron.
www.anvilintl.com
14
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. R-2 ECCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
x1 x1 x 1¼ x1 x 1¼ x 1½ x1 x 1¼ x 1½ x2 x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½ x 3* x1 x 1½ x2 x 2½ x3 x4 x1 x 1½ x2 x 2½ x3 x 4* x5 x 1½ x2 x 2½ x3 x4 x5 x6
CONTINUED
NOMINAL SIZE WEIGHT (MM) EACH (LBS) 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 25 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
1.25 1.30 1.30 1.40 1.00 1.00 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.00 3.21 3.21 3.21 3.21 3.21 4.84 4.84 4.84 4.84 4.84 4.84 6.00 7.50 7.50 7.50 7.50 7.50 7.50 9.07 9.07 9.07 9.07 9.07 9.07 9.07
PRICE EACH PAINTED POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $709.89 POA POA POA $1,454.61 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
GALV. POA POA POA POA POA POA $1,239.39 POA POA POA POA POA POA POA POA POA $2,537.19 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES)
10
12
16.38 16.38 16.38 16.38 16.38 16.38 16.38 16.38 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
PAINTED
POA POA POA POA POA POA POA POA POA POA POA POA $4,938.58 $4,082.49 POA POA POA
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA $6,584.52 $5,465.26 POA POA POA
FIG. R-3 CONCENTRIC REDUCER GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
6
250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
PRICE EACH
* Ductile iron, all others segmentally welded.
5
Revised:
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
NOMINAL SIZE WEIGHT (MM) EACH (LBS)
www.anvilintl.com
x1 x1 x 1¼ x 1* x 1¼* x 1½ * x1 x 1¼ x 1½ x2 x 1* x 1¼ x 1½ x 2* x 2½ x 1* x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x2 x3 x 4*
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 100 150 x 25 150 x 32 150 x 40 150 x 50 150 x 80 150 x 125
0.95 0.95 0.95 1.00 1.00 0.79 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.21 3.21 3.21 3.21 3.21 3.21 4.84 6.00 6.00 6.00 7.50 7.50 7.50
$101.26 POA $101.26 $118.47 POA $118.47 POA POA POA POA POA POA POA POA POA POA $144.20 POA POA POA POA POA POA POA POA POA POA POA
$119.59 POA $119.59 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $1,126.61 POA $880.12 $880.12 $880.12 POA POA 15
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Mechanical Branch Tees FIG. MT-1 THREADED MECHANICAL BRANCH TEE*** NOMINAL SIZE (INCHES)
x1 x 1¼ x 1½ x1 2½ x 1¼ x 1½ x1 x 1¼ 3 x 1½ x2 x1 x 1¼ 4 x 1½ x2 x 2½ x 1½ 5 x2 x 2½ x 1½ 6 x2 x 2½ 2
NOMINAL SIZE (MM)
50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 80 x 25 80 x 32 80 x 40 80 x 50 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 125 x 40 125 x 50 125 x 65 150 x 40 150 x 50 150 x 65
WEIGHT EACH (LBS) 1.70 1.70 1.70 3.60 3.60 3.60 3.80 3.30 3.80 4.40 4.60 4.60 4.60 4.80 5.40 7.40 7.90 7.90 7.50 8.00 8.00
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4
PRICE EACH PAINTED GALV.
$41.59 $41.59 $47.34 $51.28 $51.28 $51.28 $53.74 $53.74 $53.74 $61.63 $62.32 $62.32 $62.32 $68.57 $68.57 $90.41 $90.41 $95.68 $81.67 $81.67 $88.61
$67.37 $59.50 $67.37 $83.02 $83.02 $73.35 $86.45 $76.27 $86.45 $88.28 $100.92 $100.92 $100.92 $111.27 $111.27 $129.36 $129.36 $136.95 $132.52 $132.52 $143.49
BOX 22 22 22 16 16 16 10 10 10 10 7 7 7 6 6 4 4 4 4 4 3
QUANTITY CRATE 792 792 792 576 576 576 360 360 360 360 252 252 252 216 216 144 144 144 144 144 108
*** All MT-1 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
FIG. MT-2 GROOVED MECHANICAL BRANCH TEE*** NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 3
4
5
6
x 1½ 80 x 40 x2 80 x 50 x 11/4 100 x 40 x 1½ 100 x 40 x 2 100 x 50 x 2½ 100 x 65 x 3 100 x 80 x 2 125 x 50 x 2½ 125 x 65 x 1½ 150 x 40 x 2 150 x 50 x 2½ 150 x 65 x 3 150 x 80 x 4 150 x100
WEIGHT EACH (LBS) 3.80 4.40 4.60 4.60 4.80 5.40 7.60 7.90 7.90 8.00 8.00 8.00 9.70 13.60
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2 2
½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 3¼ ½ x 3¼ 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4
PRICE EACH PAINTED GALV. $53.74 $61.63 $64.94 $64.94 $68.57 $67.71 $72.99 $284.71 $265.95 $99.29 $88.61 $100.42 $94.04 $104.22
$87.11 $88.09 POA $105.21 $110.94 $109.64 $118.18 $345.53 $365.59 $141.88 $143.49 $143.49 $143.49 $168.85
BOX 10 10 7 7 7 6 6 4 4 4 4 4 3 3
QUANTITY CRATE 360 360 252 252 252 216 216 144 144 144 144 144 108 108
*** All MT-2 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
Revised:
www.anvilintl.com
16
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Mechanical Branch Tees FIG. MT-30 THREADED MECHANICAL BRANCH TEE NOMINAL SIZE NOMINAL SIZE (INCHES) (MM) 1¼
1½
2
2½
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1
32x15 32x20 32x25 40x15 40x20 40x25 50x15 50x20 50x25 65x15 65x20 65x25
WEIGHT EACH (LBS) 0.83 0.87 0.97 0.64 0.93 0.96 0.84 0.95 0.96 0.89 0.95 1.03
COMPLETE
QUANTITY
PLATED
BOX
$19.74 $19.74 $19.74 $19.74 $19.74 $19.74 $20.39 $20.39 $20.39 $23.18 $20.39 $20.39
50 50 50 50 50 50 45 45 45 40 40 40
CRATE 1,800 1,800 1,800 1,800 1,800 1,800 1,620 1,620 1,620 1,440 1,440 1,440
Note: BSPT equivalent is available as MT-90.
q — Sold in box only
Revised:
www.anvilintl.com
17
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Spare Parts / Lubricants Plated Trackhead Bolts and Nuts for Couplings BOLT AND NUT SIZE (INCHES) PRICE EACH ³ ⁄₈ x 2 ⁄³ ₈ x 2¼ ³ ⁄₈ x 2½ ½ x 2¾ ½x3 ½ x 3¼ ½ x 3½ ⁵ ⁄₈ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3½ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4¼ ¾ x 4¼ ¾ x 4½ ⁷⁄₈ x 5 ⁄⁷ ₈ x 5½
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
C-1, C-3, C-4 NOMINAL SIZE FLUSH GAP (INCHES) GASKET 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
LUBRICANTS STANDARD LUBRICANT 2LB Tub Std Gruvlok Lubricant 5 Gallon Pail
Revised:
F-3 “E” GASKET
POA POA POA POA POA POA POA POA -
$270.29 $821.58
E TYPE A GASKET
POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES) 2 x 1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
RC-2 “E” GASKET POA POA POA POA POA POA POA POA POA POA
STANDARD LUBRICANT USAGE GUIDE
XTREME LUBRICANT USAGE GUIDE
NUMBER OF GASKETS
NUMBER OF GASKETS PER QUART 1,200 900 600 390 300 255 180 150 120 105 90 60
PRICE $111.18/tub POA
QUICK DRY LUBRICANT 1 Quart Can XTREME LUBRICANT (SILICONE) 10 oz. Tube (1 each) 2.2 lb. Tub (Gruvlok Lubricant)
RC-2 Gaskets
C-1, C-3, C-4 & F-3 Gaskets
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
PER TUBE 55 45 25 20 15 10 9 7 6 5 4
www.anvilintl.com
3
PER QUART 400 300 200 130 100 85 60 50 40 35 30 20
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
18
Price Lis GROOVED FIRE PRODUCT GROOVED FIRE PRODUCTS Price List GROOVED FIRE PRODUCTS Price List
Effective Date: October 5, 2015 | Replaces | Sheet # SPF.GRFP-10.15C Effective Date: December 4, 2017 | Replaces PriorPrior Date:Date: MayMay 20172015 | Sheet # SPF.GRFP-12.17C Effective Date: May 1, 2017 | Replaces Prior Date: October 2015 | Sheet # SPF.GRFP-5.17C
Cross Reference DESCRIPTION
GRUVLOK®
ANVIL / SPF™
VICTAULIC®
Rigid Coupling
7400
C-4
005
Flexible Coupling
7000
C-3, C-1
75
Reducer Coupling
7010
RC-2
750
Standard 90° Elbow
7050S / 7050
E-1
10
Standard 45° Elbow
7051FP / 7051
E-2
11
Standard 22¹/2° Elbow
7052
E-3 (SW)
12
Standard 11¹/4° Elbow
7053
E-4 (SW)
13
Standard Reducer Tee
7061
T-2 (SW)
25
Straight Tee with Thread Outlet
7063
N/A
29M
Reducing Tee with Thread Outlet
7064
T-3 (SW)
29T
Concentric Reducer
7072
R-1 (SW)
50
Concentric Reducer with Thread Outlet
7076
R-3 (SW)
52
Eccentric Reducer
7073
R-2 (SW)
51 (SW)
7050DR
E-9
10DR
Short Pattern 90° Elbow
7450
SE-1
001
Short Pattern Straight Tee
7460
ST-1
002
Bullhead Tee
7062
N/A
21
Standpipe Tee
7065
N/A
27
Cap
7074
SK-1
006
Cross
7068
X-1
N/A
Thread Mechanical Tee
7045
MT-1
920
-
SE-5
N/A
Grooved Mechanical Tee
7046
MT-2
920
Threaded Mechanical Branch Tee
7044
MT-30/MT-8
921, 925
Grooved Flange Adapter
7012FP
F-3
744
Flange / Grooved Nipple
7083
F-2 (SW)
41
Plain-End Coupling
7005
N/A
90
Outlet Coupling
7042
N/A
72
90° Drain Elbow
Reducing 90° Elbow GRVxTHRD
TM — Thread Male TF — Thread Female SW — Segmented Welded Fitting – not available in cast ductile fitting.
Revised: Revised: Revised:
www.anvilintl.com www.anvilintl.com www.anvilintl.com
191919
CORPORATE OFFICES 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 • Fax: 603-418-2833 E-mail: [email protected]
CUSTOMER SERVICE CENTERS UNITED STATES
CANADA
Tel: 800-301-2701 • Fax: 708-534-5441 Email: [email protected]
Tel: 519-426-4551 • Fax: 519-426-5509 Email: [email protected]
LATIN AMERICA
INTERNATIONAL
Tel: 800-301-2701 • Fax: 708-534-5441 Email: [email protected]
Tel: 800-301-2701 • Fax: 708-534-5441 Email: [email protected]
REGIONAL DISTRIBUTION CENTERS UNITED STATES Illinois 7979 W. 183rd Street, Unit D Tinley Park, IL 60484 Texas 1401 Valley View Lane, Suite 150 Irving, TX 75061 Pennsylvania 800 Malleable Road Columbia, PA 17512
b u i l d i n g
California 1470 S. Vintage Avenue Ontario, CA 91761 Florida 236 Outlook Point Drive, Suite 100 Orlando, FL 32809
INTERNATIONAL Canada 390 Second Avenue, Simcoe P.O. Box 40 Ontario, Canada, N3Y 4K9
c o n n e c t i o n s
www.anvilintl.com
t h a t
l a s t
#778 / Printed in USA / ©2017 Revision: December 4, 2017
FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. All shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer’s account. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s website at www.anvilintl.com. •P ricing is subject to change without notice. Go to Anvil’s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
NATIONAL TOLL FREE HOTLINE
80 0 - 6 61-89 98
www.anvilintl.com
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Please refer to Anvil International's Canadian Return Material Policy (RMA) available on the website at www.anvilintl.com/CanadaRMA.
Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Buyer (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
4. SELLER’S LIABILITY:
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.
NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. All shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer’s account.
www.anvilintl.com
2
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Approvals For current certifications, listings and other approvals, visit Anvil’s website at www.anvilintl.com
Standard Gaskets - Your order must specify gasket grade TEMPERATURE RANGE
COMPOUND (COLOR STRIPE)
E
(type A)
Ambient -40°F to +150°F (-40°C to +66°C)
EPDM (Purple)
Applicable for wet and dry (oil free air) sprinkler services.
E
-40°F to +230°F (-40°C to +110°C)
EPDM (Green)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
EP
-40°F to +250°F
EPDM (Green and Red)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
GRADE
GENERAL SERVICE APPLICATION
Standard Gasket
Flush Gasket
Bolts / Nuts U-Bolts
Carbon steel SAE grade 2. Zinc electroplated to ASTM A-164.
Oval Neck Track Head Bolts
Heat-treated to conform to ASTM A-183 minimum tensile strength 110,000 PSI with yield point of 80,000 PSI. Zinc electroplated to ASTM A-164.
Heavy Hex Nuts
SAE J995 Grade 2 or ASTM A536 Grade “A” or “B”. Zinc Electroplated to ASTM A-164.
Hex Flange Lock Nuts
Carbon steel per ASTM A-194. Zinc electroplates to ASTM A-164.
Housings & Fittings ASTM A-536
All ductile iron housings and fittings meet or exceed material conforming to ASTM A-536.
ASTM A-53 or A-135
All segmentally welded fittings std weight except E-9 and K-9 is SCH 10.
ASTM 234 WPB/ASA B16.9 ASTM A53 or A135
Forged Steel Fittings.
ASTM A-312/A-312M
Stainless steel fittings grade TP304L or TP316L.
ANSI/ASME
All MT-1 mechanical tees are NPT standard conforming to ANSI-ASME B1.20.1.
BS 21
All MT-8 mechanical tees are British parallel joining threads.
Finish
All grooved coupling housings and fittings are finished with a rust inhibiting orange paint. Hot dipped galvanizing per ASTM A-153 is also available upon request.
ASME/ANSI B16.1
F-3 grooved flange adapter drilling conforms to ASME/ANSI B16.1 for class 125 cast iron flanges.
Revised:
www.anvilintl.com
3
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Table of Contents Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Approvals, Gasket Material, Bolts / Nuts, Housing & Fittings . . . . . . . . . . . . . . . . . . . . . . . . 3 Couplings / Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7 C-1 Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-3 LW Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-4 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RC-2 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 F-3 Grooved Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 74FP SlideLOK Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fittings for Fire Protection (Short Body Fittings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SE-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ST-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Fittings for Grooved-End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–15 E-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-2 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-3 22½° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-4 11¼° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-9 90° Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 K-9 Drain Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SE-5 90° Reducing Elbow (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SK-1 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 F-2 Flange Nipple ANSI 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 X-1 Steel Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-2 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 T-3 Reducing Tee (Threaded Branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 R-1 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 R-2 Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 R-3 Concentric Reducer (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mechanical Branch Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–17 MT-1 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-2 Grooved Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-30 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Spare Parts / Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Revised:
www.anvilintl.com
4
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Couplings / Flange Adapter FIG. C-1 / C-3 (AMBIENT) LW FLEXIBLE COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 6 8 10 (C-1) 12 (C-1)
1.25 1.46 1.45 1.98 2.58 4.14 7.00 13.00 21.50 27.36
32 40 50 65 80 100 150 200 250 300
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV.
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2¼ ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 4¼ ⁷⁄₈ x 5½ ⁷⁄₈ x 5½
$12.62 $13.40 $14.36 $20.72 $23.82 $27.17 $46.84 $95.19 $401.66 $489.55
$31.38 $33.02 $26.20 $31.22 $37.02 $48.39 $108.20 $147.24 $573.94 $699.40
$23.85 $24.97 $26.80 $31.13 $42.61 $51.18 $89.93 $142.74 POA POA
$33.70 $35.34 $33.91 $43.87 $50.87 $55.08 $96.95 $153.78 POA POA
QUANTITY FOR “A” GASKET ONLY BOX CRATE 45 45 42 28 20 10 6 -
1,620 1,620 1,512 1,008 720 360 216 70 27 22
q — Sold in box only Standard Gasket
Flush Gasket
FIG. C-4 (AMBIENT) RIGID COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
Revised:
32 40 50 65 80 100 125 150 200 250 300
1.48 1.66 1.83 2.04 2.41 3.17 5.15 5.84 10.82 21.50 27.36
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ½x3 ½x3 ⁵ ⁄₈ x 3½ ⁷⁄₈ x 5 ⁄⁷ ₈ x 5½
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV.
$12.62 $13.40 $14.36 $20.72 $23.82 $27.17 $63.28 $46.84 $95.19 $342.90 $448.39
$31.38 $33.02 $26.20 $31.22 $37.02 $48.39 $100.18 $108.20 $147.24 $577.53 $748.38
www.anvilintl.com
$23.85 $24.97 $26.80 $31.13 $42.61 $51.18 $89.93 $142.74 -
$33.70 $35.34 $33.91 $43.87 $50.87 $55.08 $96.95 $153.78 -
QUANTITY FOR “A” GASKET ONLY BOX CRATE 40 40 30 28 20 10 7 6 1 -
1,440 1,440 1,080 1,008 720 360 252 216 80 27 22
5
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Couplings / Flange Adapter FIG. RC-2 REDUCING COUPLING NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 2 x1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
50 x 40 65 x 50 80 x 50 80 x 65 100 x 50 100 x 65 100 x 80 125 x 100 150 x 100 200 x150
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES)
WEIGHT EACH (LBS)
2 2 2 2 2 2 2 2 2 2
2.90 3.41 4.23 3.79 7.07 6.98 6.50 11.40 12.99 17.77
³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3¼ ⁷⁄₈ x 5
COUPLINGS COMPLETE WITH “E” GASKET PAINTED GALV.
$55.08 $55.08 $63.10 $61.48 $100.63 $89.92 $84.31 $136.62 $172.44 $258.92
$66.80 $99.00 $100.14 $85.83 $181.07 $142.54 $133.83 $418.54 $310.72 $466.37
BOX 24 18 16 16 8 8 8 4 1
QUANTITY CRATE 864 648 576 576 288 288 288 144 70
Note: Not recommended for Vacuum Service
q — Sold in box only
FIG. F-3 GROOVED FLANGE ADAPTER NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 5 6 8 10 12
50 65 80 100 125 150 200 250 300
3.20 4.60 5.70 7.90 9.20 10.00 15.70 47.00 69.00
COMPLETE WITH EPDM GASKET PAINTED GALV.
$78.90 $86.22 $156.06 $203.52 $217.70 $283.72 $353.11 $546.20 $1,013.06
$106.29 $116.03 $210.70 $274.75 $316.46 $383.02 $476.69 POA POA
BOX 12 10 10 8 6 -
QUANTITY CRATE 432 360 360 288 216 120 80 40 40
q — Sold in box only
SlideLOK® Coupling Fig. 74FP NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1 1/4 1 1/2 2 2 1/2 3 4
1.660 1.900 2.375 2.875 3.500 4.500
1.95 2.10 2.69 2.87 3.58 4.55
COMPLETE WITH EPDM GASKET PAINTED GALV. $22.50 $24.75 $27.50 $28.50 $34.25 $42.50
$26.50 $30.00 $35.50 $35.50 $42.75 $53.50
BOX
QUANTITY
22 20 15 15 12 10
CRATE
½ x 2½ ½ x 2½ ½ x 23/4 ½ x 2½ ½x3 ½ x 3½
q — Sold in box only
Revised:
www.anvilintl.com
6
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe (Short Body) FIG. SE-1 90° ELBOW PRICE EACH NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 2 2½ 3 4 6 8
50 65 80 100 150 200
WEIGHT EACH (LBS) 1.50 2.14 3.60 5.78 11.78 21.10
PAINTED $14.71 $21.35 $32.53 $46.00 $134.61 $265.31
QUANTITY
GALV.
BOX
CRATE
$23.36 $33.53 $49.49 $71.17 $207.26 $454.02
32 18 10 6 2 -
1,152 648 360 216 72 18
q — Sold in box only
FIG. ST-1 STRAIGHT TEE PRICE EACH NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 6 8
Revised:
50 65 80 100 150 200
2.90 4.60 6.90 10.90 25.00 42.10
QUANTITY
PAINTED
GALV.
BOX
CRATE
$22.89 $33.87 $47.68 $72.88 $179.28 $468.97
$40.93 $60.32 $78.24 $126.39 $283.90 $660.96
18 12 6 4 -
648 432 216 144 36 14
www.anvilintl.com
7
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. E-1 90° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.85 0.90 1.47 2.90 4.22 8.00 11.94 17.50 32.20 54.11 70.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$13.67 $13.80 $14.69 $26.46 $37.48 $53.59 $167.01 $155.01 $305.22 $900.29 $1,427.40
$27.46 $27.92 $29.58 $42.89 $61.13 $71.69 $238.51 $253.80 $478.52 $1,179.71 $2,057.50
60 50 28 15 9 4 2 2 -
2,160 1,800 1,008 540 324 144 72 72 15 8 4
q — Sold in box only
FIG. E-2 45° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.59 0.78 1.02 1.80 2.79 4.90 11.32 11.55 17.90 30.00 40.40
PRICE EACH PAINTED
$14.72 $15.21 $11.84 $15.31 $31.91 $47.07 $132.83 $132.83 $290.54 $747.38 $1,062.75
QUANTITY
GALV.
$24.14 $24.14 $27.39 $39.64 $56.56 $75.57 $231.46 $234.56 $442.26 $936.32 $1,297.52
BOX 90 60 36 24 12 8 2 2 -
CRATE 3,240 2,160 1,296 864 432 288 72 72 36 12 4
q — Sold in box only
Revised:
www.anvilintl.com
8
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. E-3* 22½° ELBOW
FIG. E-4* 11¹/₄° ELBOW
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.80 0.70 1.60 2.10 3.10 5.40 7.80 8.30 17.90 30.00 40.40
PRICE EACH PAINTED
GALV.
$94.20 $94.20 $94.20 $94.20 $109.64 $146.80 POA $415.50 $869.92 $748.33 $864.26
POA $113.19 $113.19 $113.19 $177.68 $237.83 POA $673.12 $1,409.54 POA POA
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
* Segmentally welded.
* Segmentally welded.
FIG. E-9 90° DRAIN ELBOW
FIG. K-9 DRAIN CAP
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.87 2.13 2.76 4.33 5.60 8.80 12.80 18.77 32.64 48.50 66.00
PRICE EACH PAINTED
GALV.
POA POA POA $168.14 $225.06 $233.70 POA $432.17 $652.19 $1,386.36 $2,133.31
$289.15 $289.15 $289.15 $289.15 $314.96 $355.39 $507.59 $558.56 $843.24 $1,980.60 $3,047.58
32 40 50 65 80 100 125 150 200 250 300
0.50 0.70 0.90 1.50 2.00 3.30 5.00 6.50 10.00 14.50 29.30
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8
32 40 50 65 80 100 125 150 200
0.71 0.76 0.83 1.06 1.27 2.92 3.40 4.02 6.66
PRICE EACH PAINTED
GALV.
$168.01 POA $168.01 $168.01 POA $261.96 POA $741.32 POA POA POA
POA POA POA POA POA POA POA POA POA POA POA
PRICE EACH PAINTED
GALV.
$228.84 $228.84 $228.84 $228.84 $268.28 $282.08 $411.27 $459.26 $543.91
$326.80 $326.80 $326.80 $326.80 $383.17 $403.04 $587.63 $656.19 $777.03
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
Revised:
www.anvilintl.com
9
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. SE-5 REDUCING 90° ELBOW GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼
1½
2
2½ 3
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x¾ x1
WEIGHT EACH (LBS) 0.50 0.54 0.60 0.63 0.70 0.80 0.84 0.93 1.04 1.18 1.30 1.50 2.20 2.50
PRICE EACH
QUANTITY
PAINTED $28.94 $25.47 $25.47 $25.47 $25.47 $25.47 $26.64 $27.87 $27.87 $27.15 $41.45 $41.45 $51.60 $41.45
BOX
CRATE
80 80 80 80 80 80 50 50 50 36 36 36 24 24
2,880 2,880 2,880 2,880 2,880 2,880 1,800 1,800 1,800 1,296 1,296 1,296 864 864
q — Sold in box only
FIG. SK-1 CAP NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 * 12 *
32 40 50 65 80 100 125 150 200 250 300
0.31 0.39 0.54 0.75 1.23 1.96 4.60 4.58 6.00 21.00 35.50
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$6.22 $7.63 $8.82 $10.74 $13.23 $20.21 $73.33 $55.25 $121.70 $244.08 $446.32
$11.65 $13.18 $13.81 $17.61 $28.25 $33.87 $114.58 $104.05 $182.96 $418.99 $675.59
180 150 100 70 45 25 12 6 -
6,480 5,400 3,600 2,520 1,620 900 432 216 70 50
* Sizes 10" and 12" are Fig. K-1 Design
Revised:
www.anvilintl.com
10
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe ◊ FIG. F-2* FLANGE NIPPLE ANSI 150 NOMINAL SIZE (INCHES) 2 2½ 3 4 5 6 8 10 12
FIG. X-1* STEEL CROSS PRICE EACH
NOMINAL SIZE WEIGHT EACH (MM) (LBS) 50 65 80 100 125 150 200 250 300
PAINTED
GALV.
POA POA POA POA POA POA POA POA POA
$519.26 $613.29 $662.12 $1,136.17 $1,129.11 $1,345.25 $1,791.39 $2,809.04 $3,844.16
6.20 9.90 11.00 47.00 40.00 50.00 60.00 60.00 91.00
PRICE EACH NOMINAL SIZE NOMINAL SIZE WEIGHT EACH (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
* Segmentally welded. ◊ Flange portion is 150# steel. Larger sizes available upon request.
32 40 50 65 80 100 125 150 200 250 300
2.00 2.20 2.80 3.30 4.50 6.60 9.30 14.50 28.50 40.50 57.00
PAINTED
GALV.
POA POA POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA
* Segmentally welded steel.
FIG. T-1 STRAIGHT TEE (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.40 1.46 2.18 3.30 6.41 9.92 17.93 22.00 42.10 72.73 91.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$19.74 $20.39 $31.73 $50.78 $58.86 $89.76 $282.42 $259.10 $518.62 $1,371.40 $2,415.05
$36.50 $36.50 $51.60 $70.51 $111.61 $158.45 $413.59 $443.02 $845.21 $1,568.24 $2,749.59
40 35 18 9 5 2 -
1,440 1,260 648 324 180 72 36 36 12 8 4
q — Sold in box only
Revised:
www.anvilintl.com
11
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. T-2 REDUCING TEE NOMINAL SIZE (INCHES) 2x2
2½ x 2½
3x3
4x4
5x5
6x6
8x8
Revised:
x 1* x 1¼ x1½ x1 x 1¼ x1½ x 2* x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½* x 3* x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x 2* x 2½* x 3* x 4* x 5* x 1½ x2 x 2½ x3 x 4* x5 x 6*
CONTINUED NOMINAL SIZE WEIGHT (MM) EACH (LBS)
50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 40 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150
2.60 3.00 3.00 4.40 4.40 4.40 4.40 6.05 6.05 6.05 6.05 6.05 10.98 10.98 10.98 10.98 12.28 11.99 13.95 13.95 13.95 13.95 13.95 13.95 13.95 25.25 25.25 25.25 23.54 22.79 24.95 24.20 25.39 42.16 42.16 42.16 42.16 41.54 24.80 39.51
PRICE EACH PAINTED
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $213.51 $213.51 $213.51 POA POA POA POA POA POA POA POA POA POA $505.81 $684.20 $505.81 $505.81 $682.33 POA POA POA POA $1,424.67 POA $1,424.67
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $343.21 $343.21 $343.21 POA POA POA POA POA POA POA POA POA POA $853.12 $853.12 $853.12 $853.12 POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES)
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV.
10 x 10
x2 x 2½ x3 x4 x5 x6 x8
250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x200
12 x 12
x3 x4 x5 x6 x8 x 10*
300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
69.25 69.25 69.25 69.25 69.25 35.60 69.25 100.00 101.60 100.00 100.00 100.00 101.60
POA POA POA POA POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA POA POA
* Ductile iron, all others segmentally welded.
www.anvilintl.com
12
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. T-3 REDUCING TEE W/ THREADED BRANCH NOMINAL SIZE (INCHES)
x ¾* x 1* 2x2 x1¼ x1½ x1 x 1¼ 2½ x 2½ x1½ x2 x 1* x 1¼ 3x3 x 1½* x2 x 2½ x 1* x 1¼ x 1½ 4x4 x2 x 2½ x3 x1 x 1¼ x2 5x5 x 2½ x3 x4 x1 x 1¼ x 1½ x2 6x6 x 2½ x3 x4 x5 x 1½ x2 x 2½ 8x8 x3 x4 x5 x6
Revised:
NOMINAL SIZE (MM)
WEIGHT EACH (LBS)
50 x 50 x 20 50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150
2.68 3.00 3.00 3.00 4.40 4.40 4.40 4.40 6.47 6.05 6.27 6.05 6.05 10.47 10.98 10.98 10.98 10.98 10.98 13.95 13.95 13.95 32.95 13.95 13.95 25.25 25.25 25.25 25.25 26.50 25.25 25.25 25.25 42.16 42.16 42.16 42.16 42.16 42.16 42.16
CONTINUED
PRICE EACH PAINTED
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES)
10 x 10
12 x 12
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x2 x 2½ x3 x4 x5 x6 x8 x 10
NOMINAL SIZE WEIGHT (MM) EACH (LBS) 250 x 250 x 40 250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x 200 300 x 300 x 50 300 x 300 x 65 300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
69.25 69.25 69.25 69.25 69.25 69.25 69.25 69.25 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00
PRICE EACH PAINTED
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
* Ductile iron, all others segmentally welded.
www.anvilintl.com
13
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. R-1 CONCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
Revised:
x1 x1 x 1¼ x 1* x 1¼* x 1½* x1 x 1¼ x 1½ x 2* x1 x 1¼ x 1½ x 2* x 2½* x1 x 1¼ x 1½* x 2* x 2½ x 3* x 3½ x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1½ x 2* x 2½* x 3* x 4* x5 x 1½ x2 x 2½ x 3* x 4* x5 x 6*
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 100 x 90 125 x 25 125 x 32 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
0.85 0.73 0.95 0.80 0.79 0.79 1.50 1.50 1.50 1.91 2.35 2.35 2.35 1.41 1.50 3.21 3.21 2.66 2.51 3.21 2.55 1.00 4.84 4.84 4.84 4.84 4.84 4.84 4.84 7.50 7.50 6.34 5.10 4.29 7.50 7.50 9.07 9.07 9.07 9.15 9.07 9.07 9.07
POA $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $36.81 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 $52.64 POA POA POA $139.21 $139.21 $139.21 $139.21 POA POA $144.64 $144.64 $144.64 $144.64 $144.64 POA POA $258.72 $258.72 $258.72 $258.72 $258.72
POA POA POA $121.66 $121.66 $121.66 POA POA POA $121.66 POA POA POA $111.12 $138.39 POA POA POA $150.21 $185.24 POA $185.24 $264.81 $264.81 $264.81 POA POA POA $264.81 POA POA $349.79 POA $349.79 $317.42 $451.38 POA POA $633.00 POA $633.00 POA $799.85
NOMINAL SIZE (INCHES)
10
12
x 1½ x2 x 2½ x3 x4 x5 x6 x 8* x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
16.38 16.38 16.38 16.38 16.38 16.38 16.38 23.10 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
POA POA POA POA $534.17 POA $534.17 $534.17 POA POA POA POA $656.94 $656.94 $656.94 $656.94 $656.94
POA POA POA POA POA POA $1,627.33 POA POA POA POA POA POA $2,759.60 POA POA POA
* Ductile iron Segmentally welded through 4 x 3 unless *Ductile Iron. Forged Steel 5 x 1 and larger unless *Ductile Iron.
www.anvilintl.com
14
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Fittings for Grooved-End Pipe FIG. R-2 ECCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
x1 x1 x 1¼ x1 x 1¼ x 1½ x1 x 1¼ x 1½ x2 x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½ x 3* x1 x 1½ x2 x 2½ x3 x4 x1 x 1½ x2 x 2½ x3 x 4* x5 x 1½ x2 x 2½ x3 x4 x5 x6
CONTINUED
NOMINAL SIZE WEIGHT (MM) EACH (LBS) 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 25 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
1.25 1.30 1.30 1.40 1.00 1.00 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.00 3.21 3.21 3.21 3.21 3.21 4.84 4.84 4.84 4.84 4.84 4.84 6.00 7.50 7.50 7.50 7.50 7.50 7.50 9.07 9.07 9.07 9.07 9.07 9.07 9.07
PRICE EACH PAINTED POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $709.89 POA POA POA $1,454.61 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
GALV. POA POA POA POA POA POA $1,239.39 POA POA POA POA POA POA POA POA POA $2,537.19 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES)
10
12
16.38 16.38 16.38 16.38 16.38 16.38 16.38 16.38 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
PAINTED
POA POA POA POA POA POA POA POA POA POA POA POA $4,938.58 $4,082.49 POA POA POA
GALV.
POA POA POA POA POA POA POA POA POA POA POA POA $6,584.52 $5,465.26 POA POA POA
FIG. R-3 CONCENTRIC REDUCER GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
6
250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
PRICE EACH
* Ductile iron, all others segmentally welded.
5
Revised:
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
NOMINAL SIZE WEIGHT (MM) EACH (LBS)
www.anvilintl.com
x1 x1 x 1¼ x 1* x 1¼* x 1½ * x1 x 1¼ x 1½ x2 x 1* x 1¼ x 1½ x 2* x 2½ x 1* x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x2 x3 x 4*
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 100 150 x 25 150 x 32 150 x 40 150 x 50 150 x 80 150 x 125
0.95 0.95 0.95 1.00 1.00 0.79 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.21 3.21 3.21 3.21 3.21 3.21 4.84 6.00 6.00 6.00 7.50 7.50 7.50
$101.26 POA $101.26 $118.47 POA $118.47 POA POA POA POA POA POA POA POA POA POA $144.20 POA POA POA POA POA POA POA POA POA POA POA
$119.59 POA $119.59 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA $1,126.61 POA $880.12 $880.12 $880.12 POA POA 15
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Mechanical Branch Tees FIG. MT-1 THREADED MECHANICAL BRANCH TEE*** NOMINAL SIZE (INCHES)
x1 x 1¼ x 1½ x1 2½ x 1¼ x 1½ x1 x 1¼ 3 x 1½ x2 x1 x 1¼ 4 x 1½ x2 x 2½ x 1½ 5 x2 x 2½ x 1½ 6 x2 x 2½ 2
NOMINAL SIZE (MM)
50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 80 x 25 80 x 32 80 x 40 80 x 50 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 125 x 40 125 x 50 125 x 65 150 x 40 150 x 50 150 x 65
WEIGHT EACH (LBS) 1.70 1.70 1.70 3.60 3.60 3.60 3.80 3.30 3.80 4.40 4.60 4.60 4.60 4.80 5.40 7.40 7.90 7.90 7.50 8.00 8.00
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4
PRICE EACH PAINTED GALV.
$41.59 $41.59 $47.34 $51.28 $51.28 $51.28 $53.74 $53.74 $53.74 $61.63 $62.32 $62.32 $62.32 $68.57 $68.57 $90.41 $90.41 $95.68 $81.67 $81.67 $88.61
$67.37 $59.50 $67.37 $83.02 $83.02 $73.35 $86.45 $76.27 $86.45 $88.28 $100.92 $100.92 $100.92 $111.27 $111.27 $129.36 $129.36 $136.95 $132.52 $132.52 $143.49
BOX 22 22 22 16 16 16 10 10 10 10 7 7 7 6 6 4 4 4 4 4 3
QUANTITY CRATE 792 792 792 576 576 576 360 360 360 360 252 252 252 216 216 144 144 144 144 144 108
*** All MT-1 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
FIG. MT-2 GROOVED MECHANICAL BRANCH TEE*** NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 3
4
5
6
x 1½ 80 x 40 x2 80 x 50 x 11/4 100 x 40 x 1½ 100 x 40 x 2 100 x 50 x 2½ 100 x 65 x 3 100 x 80 x 2 125 x 50 x 2½ 125 x 65 x 1½ 150 x 40 x 2 150 x 50 x 2½ 150 x 65 x 3 150 x 80 x 4 150 x100
WEIGHT EACH (LBS) 3.80 4.40 4.60 4.60 4.80 5.40 7.60 7.90 7.90 8.00 8.00 8.00 9.70 13.60
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2 2
½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 3¼ ½ x 3¼ 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4
PRICE EACH PAINTED GALV. $53.74 $61.63 $64.94 $64.94 $68.57 $67.71 $72.99 $284.71 $265.95 $99.29 $88.61 $100.42 $94.04 $104.22
$87.11 $88.09 POA $105.21 $110.94 $109.64 $118.18 $345.53 $365.59 $141.88 $143.49 $143.49 $143.49 $168.85
BOX 10 10 7 7 7 6 6 4 4 4 4 4 3 3
QUANTITY CRATE 360 360 252 252 252 216 216 144 144 144 144 144 108 108
*** All MT-2 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
Revised:
www.anvilintl.com
16
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Mechanical Branch Tees FIG. MT-30 THREADED MECHANICAL BRANCH TEE NOMINAL SIZE NOMINAL SIZE (INCHES) (MM) 1¼
1½
2
2½
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1
32x15 32x20 32x25 40x15 40x20 40x25 50x15 50x20 50x25 65x15 65x20 65x25
WEIGHT EACH (LBS) 0.83 0.87 0.97 0.64 0.93 0.96 0.84 0.95 0.96 0.89 0.95 1.03
COMPLETE
QUANTITY
PLATED
BOX
$19.74 $19.74 $19.74 $19.74 $19.74 $19.74 $20.39 $20.39 $20.39 $23.18 $20.39 $20.39
50 50 50 50 50 50 45 45 45 40 40 40
CRATE 1,800 1,800 1,800 1,800 1,800 1,800 1,620 1,620 1,620 1,440 1,440 1,440
Note: BSPT equivalent is available as MT-90.
q — Sold in box only
Revised:
www.anvilintl.com
17
GROOVED FIRE PRODUCTS PriceList Effective Date: December 4, 2017 | Replaces Prior Date: May 2017 | Sheet # SPF.GRFP-12.17C
Spare Parts / Lubricants Plated Trackhead Bolts and Nuts for Couplings BOLT AND NUT SIZE (INCHES) PRICE EACH ³ ⁄₈ x 2 ⁄³ ₈ x 2¼ ³ ⁄₈ x 2½ ½ x 2¾ ½x3 ½ x 3¼ ½ x 3½ ⁵ ⁄₈ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3½ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4¼ ¾ x 4¼ ¾ x 4½ ⁷⁄₈ x 5 ⁄⁷ ₈ x 5½
POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA
C-1, C-3, C-4 NOMINAL SIZE FLUSH GAP (INCHES) GASKET 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
LUBRICANTS STANDARD LUBRICANT 2LB Tub Std Gruvlok Lubricant 5 Gallon Pail
Revised:
F-3 “E” GASKET
POA POA POA POA POA POA POA POA -
$270.29 $821.58
E TYPE A GASKET
POA POA POA POA POA POA POA POA POA
POA POA POA POA POA POA POA POA POA POA POA
NOMINAL SIZE (INCHES) 2 x 1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
RC-2 “E” GASKET POA POA POA POA POA POA POA POA POA POA
STANDARD LUBRICANT USAGE GUIDE
XTREME LUBRICANT USAGE GUIDE
NUMBER OF GASKETS
NUMBER OF GASKETS PER QUART 1,200 900 600 390 300 255 180 150 120 105 90 60
PRICE $111.18/tub POA
QUICK DRY LUBRICANT 1 Quart Can XTREME LUBRICANT (SILICONE) 10 oz. Tube (1 each) 2.2 lb. Tub (Gruvlok Lubricant)
RC-2 Gaskets
C-1, C-3, C-4 & F-3 Gaskets
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
PER TUBE 55 45 25 20 15 10 9 7 6 5 4
www.anvilintl.com
3
PER QUART 400 300 200 130 100 85 60 50 40 35 30 20
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
18
Price Lis GROOVED FIRE PRODUCT GROOVED FIRE PRODUCTS Price List GROOVED FIRE PRODUCTS Price List
Effective Date: October 5, 2015 | Replaces | Sheet # SPF.GRFP-10.15C Effective Date: December 4, 2017 | Replaces PriorPrior Date:Date: MayMay 20172015 | Sheet # SPF.GRFP-12.17C Effective Date: May 1, 2017 | Replaces Prior Date: October 2015 | Sheet # SPF.GRFP-5.17C
Cross Reference DESCRIPTION
GRUVLOK®
ANVIL / SPF™
VICTAULIC®
Rigid Coupling
7400
C-4
005
Flexible Coupling
7000
C-3, C-1
75
Reducer Coupling
7010
RC-2
750
Standard 90° Elbow
7050S / 7050
E-1
10
Standard 45° Elbow
7051FP / 7051
E-2
11
Standard 22¹/2° Elbow
7052
E-3 (SW)
12
Standard 11¹/4° Elbow
7053
E-4 (SW)
13
Standard Reducer Tee
7061
T-2 (SW)
25
Straight Tee with Thread Outlet
7063
N/A
29M
Reducing Tee with Thread Outlet
7064
T-3 (SW)
29T
Concentric Reducer
7072
R-1 (SW)
50
Concentric Reducer with Thread Outlet
7076
R-3 (SW)
52
Eccentric Reducer
7073
R-2 (SW)
51 (SW)
7050DR
E-9
10DR
Short Pattern 90° Elbow
7450
SE-1
001
Short Pattern Straight Tee
7460
ST-1
002
Bullhead Tee
7062
N/A
21
Standpipe Tee
7065
N/A
27
Cap
7074
SK-1
006
Cross
7068
X-1
N/A
Thread Mechanical Tee
7045
MT-1
920
-
SE-5
N/A
Grooved Mechanical Tee
7046
MT-2
920
Threaded Mechanical Branch Tee
7044
MT-30/MT-8
921, 925
Grooved Flange Adapter
7012FP
F-3
744
Flange / Grooved Nipple
7083
F-2 (SW)
41
Plain-End Coupling
7005
N/A
90
Outlet Coupling
7042
N/A
72
90° Drain Elbow
Reducing 90° Elbow GRVxTHRD
TM — Thread Male TF — Thread Female SW — Segmented Welded Fitting – not available in cast ductile fitting.
Revised: Revised: Revised:
www.anvilintl.com www.anvilintl.com www.anvilintl.com
191919
CORPORATE OFFICES 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 • Fax: 603-418-2833 E-mail: [email protected]
CUSTOMER SERVICE CENTERS UNITED STATES
CANADA
Tel: 800-301-2701 • Fax: 708-534-5441 Email: [email protected]
Tel: 519-426-4551 • Fax: 519-426-5509 Email: [email protected]
LATIN AMERICA
INTERNATIONAL
Tel: 800-301-2701 • Fax: 708-534-5441 Email: [email protected]
Tel: 800-301-2701 • Fax: 708-534-5441 Email: [email protected]
REGIONAL DISTRIBUTION CENTERS UNITED STATES Illinois 7979 W. 183rd Street, Unit D Tinley Park, IL 60484 Texas 1401 Valley View Lane, Suite 150 Irving, TX 75061 Pennsylvania 800 Malleable Road Columbia, PA 17512
b u i l d i n g
California 1470 S. Vintage Avenue Ontario, CA 91761 Florida 236 Outlook Point Drive, Suite 100 Orlando, FL 32809
INTERNATIONAL Canada 390 Second Avenue, Simcoe P.O. Box 40 Ontario, Canada, N3Y 4K9
c o n n e c t i o n s
www.anvilintl.com
t h a t
l a s t
#778 / Printed in USA / ©2017 Revision: December 4, 2017
