installation guide - Displays2go
INSTALLATION GUIDE FlOOR TV Stand
DPD-2642 Support 26" to 42" Screens Max Load Capacity: 132 lbs (60 kg) VESA 100x100/200x100/200x200 compatible
or
attempting to begin your installation. who has a basic knowledge of building construction,installations and fully understands these instructions. omeone assist you to lift and position your equipment. bolts firmly, but do not over tighten. Over tightening can damage the items and greatly reduce their ability to hold. Please refer to suggested torque values where applicable in these instructions.
1
Install the first pipe (EE) onto base floor (DD)
6 Mounting the Assembly the adapter Plate to Screen
2
Mount the AV Tray (CC) onto the first pipe (EE)
7 Mount display
3
Mount the second pipe (FF)
8 Adjust angle
4
Separate the head assembly (AA)
9 Using cable management
5
Mount the head assembly onto second pipe(FF)
10 Increase the head accessory（Optional)
A . Installation hardware kits 1. For TV’s A
M5x25mm (x8 each)
B M6x25mm (x8 each)
D
13x13x 8.2(x8) Spacer
E
13x5x 8.2(x8) Spacer
F
Metal washer diameter 6 (x8)
C M8x25mm (x8 each)
2. For installing the stand cart G
H
Metal washer diameter 6 (x4 )
Open wrench (x1)
3mm Allen Key (x1)
Hex Socket sccrew M6* 20mm (x2)
4mm Allen Key (x1)
I
Socket pan head screw M6*12mm (x6)
2 of 6
5mm Allen Key (x1)
B . Component checklist
BB(X2)
AA(X2)
(Head Assembly)
DD(X1) (base floor)
1
(Locking Block)
CC(X1) (AV tray)
FF(X1)
EE(X1)
(Second Pipe)
(First Pipe)
Install the first pipe (EE) onto base floor (DD)
I (X2) EE
DD
3 of 6
4mm
2
Mount the AV tray (CC) o nt o the first Pipe (EE)
3mm
3mm
CC EE
3
Mount the second pipe(FF)
FF
4mm
Mount the second pipe (FF) onto the first pipe (EE).
I (x4) G (x4) EE
4
Mount the Head Assembly onto second pipe(FF) A.Vertical
BB H(x2)
FF 5mm
4 of 6
4
Mount the Head Assembly onto second pipe(FF)
B.Back to Back
I(x2) 5mm
FF
5
Mounting the assembly the adaptor plate to screen F
A+F/B+F/C
Screw off the nut first.
Note:
200×200
6
D,E
Recessed Mounting Holes. If the mounting holes are recessed into the back of the displa y, use the supplied spacer to pack the recessed hole. Ensure that the brackets are securely fixed to the display.
Mount display Mount the universal adapter kit onto display .
Open wrench
Nut M6(X2)
5 of 6
7
Adjust angle Second person will be required to assist !
。 。 +10~-2
Height adjustable
。 。 +10~-2 Height adjustable
Swivel adjustment 90°
Height adjustable Height adjustable
8
Using cable management
wires
wires
wire cable
wire cable
9
Support 4 screens installation(option)
6 of 6
DPD-2642 Support 26" to 42" Screens Max Load Capacity: 132 lbs (60 kg) VESA 100x100/200x100/200x200 compatible
or
attempting to begin your installation. who has a basic knowledge of building construction,installations and fully understands these instructions. omeone assist you to lift and position your equipment. bolts firmly, but do not over tighten. Over tightening can damage the items and greatly reduce their ability to hold. Please refer to suggested torque values where applicable in these instructions.
1
Install the first pipe (EE) onto base floor (DD)
6 Mounting the Assembly the adapter Plate to Screen
2
Mount the AV Tray (CC) onto the first pipe (EE)
7 Mount display
3
Mount the second pipe (FF)
8 Adjust angle
4
Separate the head assembly (AA)
9 Using cable management
5
Mount the head assembly onto second pipe(FF)
10 Increase the head accessory（Optional)
A . Installation hardware kits 1. For TV’s A
M5x25mm (x8 each)
B M6x25mm (x8 each)
D
13x13x 8.2(x8) Spacer
E
13x5x 8.2(x8) Spacer
F
Metal washer diameter 6 (x8)
C M8x25mm (x8 each)
2. For installing the stand cart G
H
Metal washer diameter 6 (x4 )
Open wrench (x1)
3mm Allen Key (x1)
Hex Socket sccrew M6* 20mm (x2)
4mm Allen Key (x1)
I
Socket pan head screw M6*12mm (x6)
2 of 6
5mm Allen Key (x1)
B . Component checklist
BB(X2)
AA(X2)
(Head Assembly)
DD(X1) (base floor)
1
(Locking Block)
CC(X1) (AV tray)
FF(X1)
EE(X1)
(Second Pipe)
(First Pipe)
Install the first pipe (EE) onto base floor (DD)
I (X2) EE
DD
3 of 6
4mm
2
Mount the AV tray (CC) o nt o the first Pipe (EE)
3mm
3mm
CC EE
3
Mount the second pipe(FF)
FF
4mm
Mount the second pipe (FF) onto the first pipe (EE).
I (x4) G (x4) EE
4
Mount the Head Assembly onto second pipe(FF) A.Vertical
BB H(x2)
FF 5mm
4 of 6
4
Mount the Head Assembly onto second pipe(FF)
B.Back to Back
I(x2) 5mm
FF
5
Mounting the assembly the adaptor plate to screen F
A+F/B+F/C
Screw off the nut first.
Note:
200×200
6
D,E
Recessed Mounting Holes. If the mounting holes are recessed into the back of the displa y, use the supplied spacer to pack the recessed hole. Ensure that the brackets are securely fixed to the display.
Mount display Mount the universal adapter kit onto display .
Open wrench
Nut M6(X2)
5 of 6
7
Adjust angle Second person will be required to assist !
。 。 +10~-2
Height adjustable
。 。 +10~-2 Height adjustable
Swivel adjustment 90°
Height adjustable Height adjustable
8
Using cable management
wires
wires
wire cable
wire cable
9
Support 4 screens installation(option)
6 of 6
