iRobot Roomba 655 Pet Series dust filter replacement

Report 2 Downloads 203 Views
iRobot Roomba 655 Pet Series Filter Replacement

iRobot Roomba 655 Pet Series Filter Replacement How to remove you dust bin in order to clean it out.

Written By: Matt Davis

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

iRobot Roomba 655 Pet Series Filter Replacement

INTRODUCTION It is recommended to empty and clean the dust bin often. This will keep your Roomba at its peak performance.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

iRobot Roomba 655 Pet Series Filter Replacement

Step 1 — Filter 

Grasp the back of the Roomba



Push the button with your thumb



Remove the dust bin by simply pulling out

 Be careful not to pull to hard as not to have dust/dirt fall out.

Step 2



To open the gate, push the yellow tab and pull it open



Push in the two yellow tabs on the filter and pull it out gently

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-16 11:17:09 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3