JOWA – DIESELSWITCH MKII

Main Components DSMKII

Main Mechanical Components

TI3

PG3

TI2

PG2

Shown in above picture V4- Automatic blending valve PG1- Pressure sensor MDO inlet * PG2- Pressure sensor HFO inlet * PG3- Pressure sensor Blend fuel outlet * TI1- Temperature sensor MDO inlet * TI2- Temperature sensor HFO inlet * TI3- Temperature sensor Blend fuel outlet * P6- Rubber isolator MDO inlet ** P7- Rubber isolator HFO inlet ** P8- Rubber isolator Blend fuel outlet ** Protection Covers for Rubber isolators * V7- Non return valve MDO inlet V8- Non return valve HFO inlet V7- Non return valve Blend fuel outlet Not shown in above picture Pneumatic valve V3/V6 5/2 Solenoid valve for valve V3/V6 Air damper ¼” for valve V3/V6 Position limit switch for valve V3/V6

*) Included in DSMKII Spare part kit **) Must be changed after 5 years and included in DSMKII spare part kit JOWA W.F.E. AB Motorgatan 5 252 27 HELSINGBORG SWEDEN Tel: +46 (0) 31 72 65 400 E-mail [email protected]

Date: 2015.09.30 Rev.: Sign.: JP Page: 1 / 2

Main Components DSMKII

Date: 2015.09.30 Rev.: Sign.: JP Page: 2 / 2

Main Electronic Components in Control Cabinet

PLC S7-313C Connector for PLC 40 pin MMC Card for PLC Touch Panel MP 277 8” SD Card for touch panel Analogue Module 8 AE * Power Supply 24 VDC

*) Included in DSMKII Spare part kit

NOTE: At request for quotation, or ordering, please always refer to the DSMKII serial number which is labelled inside the door of the control cabinet. Other spare parts not listed in this document can be quoted on request.

JOWA W.F.E. AB Motorgatan 5 252 27 HELSINGBORG SWEDEN Tel: +46 (0) 31 72 65 400 E-mail [email protected]