LBFA FA Series Brochure 11 13
detroit radiant
SERIES
UH
FA
FA SERIES gas-fired, separated combustion unit heater
products company Compact Comfort
The FA Series line of gas-fired, tubular exchanger, induced draft hot air heaters are now available for use in commercial, industrial & agricultural applications. This line of heaters features a low profile design with a durable, powder-coated black enamel exterior and stainless steel louvers for an exceptional aesthetic appeal. Additional features include operational troubleshooting lights, swept-wing impeller with fingerproof fan guards for low noise operation and various mounting options. The FA Series can be used as separated combustion or power-vented out-of-the-box.
btu/h INPUT OUTPUT
Typical Mounting Height
Approx. AvERaGE Heat air Temp vent length Ship Throw Rise Min. Max. weight
MODEL Number
Gas Type
FA-100
Nat. or LP
100,000
80,000
12 to 14 Ft.
43 Ft.
50°F
3 Ft.
40 Ft.
143 Lbs.
FA-125
Nat. or LP
125,000 100,000
14 to 16 Ft.
57 Ft.
50°F
3 Ft.
40 Ft.
143 Lbs.
FA-150
Nat. or LP
150,000 120,000
14 to 16 Ft.
52 Ft.
50°F
3 Ft.
40 Ft.
195 Lbs.
FA-175
Nat. or LP
175,000 140,000
15 to 17 Ft.
51 Ft.
50°F
3 Ft.
40 Ft.
195 Lbs.
FA-200
Nat. or LP
200,000 160,000
15 to 17 Ft.
55 Ft.
50°F
3 Ft.
40 Ft.
195 Lbs.
FA-225
Nat. or LP
225,000 180,000
16 to 18 Ft.
59 Ft.
50°F
3 Ft.
40 Ft.
212 Lbs.
FA-250
Nat. or LP
250,000 200,000
16 to 18 Ft.
63 Ft.
50°F
3 Ft.
40 Ft.
212 Lbs.
TYPICAL APPLICATIONS
PRODUCT FEATURES Operational Indicator Lights
Swept-wing Fan Blade
• Greenhouses Stainless Steel Discharge Louvers Powder Coated Black Enamel Exterior
Aluminized Steel Tubular Heat Exchangers
• Warehouse Spaces • Service Garages • Entrance Ways • Manufacturing Facilities
Burner Sight Glass
detroit radiant products co.
• Compact, aesthetically pleasing construction. • Easy to install with minimal assembly required. • Swept wing air propeller, for noise reduction. • Indicator lights are standard. • Finger proof fan guards are standard. • Models through 125 MBH can be rotated 180˚. • ETL Listed North American Certified for indoor use.
21400 Hoover Rd. Warren, MI 48089-3162 Phone: Toll Free: Fax: Email: Website:
(586) 756-0950 1-800-222-1100 (586) 756-2626 [email protected] www.detroitradiant.com
Visit Our Website For: Product Specs Parts Support Dealer Locator Applications
C.A.D. Library Design Guidelines Theory of Infrared and More!
FA SERIES
SPECIFICATIONS PRODUCT SPECIFICATIONS
VOLTAGE:
Input Range:
100,000 to 250,000 BTU/h
Gas Type:
Natural or Propane
Burner Control Box:
Powder coated black enamel
Radiant Exchanger Tubes:
Tubular aluminized steel
Certification:
ETL Listed North America
Limited Warranty:
1-3-5 (Components-ExchangersThermostat Connection
Operational Indicator Lights:
Standard
• Non-reversible horizontal mounting. •Mounting with (4x) -3/8”-16 threaded inserts.
MANIFOLD PRESSURE:
• Natural Gas - 3.5 Inches W.C. CERTIFICATIONS: • Propane Gas - 10.0 Inches W.C. • ANSI Z83.8/CSA 2.6 • Commercial & Industrial use. INLET PRESSURE: • Indoor use only. • Natural Gas - 5.0 to 14.0” W.C. OTHER • Propane Gas - 11.0 to •External indicator lights. 14.0” W.C. • External thermostatic connection. GAS CONNECTION • Approved for elevations • FA-100-200: 1/2” N.P.T. 0 - 2,000 ft. without • FA-225-250: 3/4” N.P.T. modifications. • Field connect to valve. • Supplied standard as separated combustion.
Burners) 24V Controls:
MOUNTING:
• 120/60Hz. VAC (primary). • 24 VAC (thermostatic). • Single phase.
VENT & INLET CONNECTION: • Category l or lll venting. • Rear, horizontal discharge/inlet.
Available fa SERIES models & dimensions Model
FLA AMPS
Motor Type
MoTor HP
Fan DiaMeter
Axial Fan Rotation
Gas Connection
Inlet & Vent Connection
heater height dim “A“
air to vent dim “B”
mounts axis dim “C”
mounts axis dim “D”
FA-100
5.2
PSC
1/8
18 in.
CCW
1/2” NPT
4” O.D.
21 in.
9.375 in.
9.5 in.
19.125 in.
FA-125
5.0
PSC
1/6
18 in.
CCW
1/2” NPT
4” O.D.
21 in.
9.375 in.
9.5 in.
19.125 in.
FA-150
10.7
PSC
1/3
22 in.
CCW
1/2” NPT
6” O.D.
27 in.
12.5 in.
9.5 in.
19.125 in.
FA-175
10.7
PSC
1/3
22 in.
CCW
1/2” NPT
6” O.D.
27 in.
12.5 in.
9.5 in.
19.125 in.
FA-200
10.7
PSC
1/3
22 in.
CCW
1/2” NPT
6” O.D.
27 in.
12.5 in.
9.5 in.
19.125 in.
FA-225
10.7
PSC
1/3
22 in.
CCW
3/4” NPT
6” O.D.
30 in.
13.875 in.
9.5 in.
19.125 in.
FA-250
10.7
PSC
1/3
22 in.
CCW
3/4” NPT
6” O.D.
30 in.
13.875 in.
9.5 in.
19.125 in
13.10”
40”
4.10”
DIM.C
20”
DIM. D 40”
fa SERIES clearances All Models
front
DIM. A
Rear View
Top View
DIM. B
9.3”
4.84”
Top and Bottom
8.6”
6.12”
Access Side
Non-Access Side
Rear
Vent Connection
Clearance to Combustibles
60 in
1 in.
18 in.
1 in.
1 in.
6 in.
Clearance to Allow Service
60 in.
1 in.
18 in.
1 in.
18 in.
6 in.
Top
Top
FRONT VIEW
SIDE VIEW Front
NonAccess Side
Access Side
Bottom
Rear
DISTRIBUTED BY:
Bottom
LBFA-FA 11/13 DRP
SERIES
UH
FA
FA SERIES gas-fired, separated combustion unit heater
products company Compact Comfort
The FA Series line of gas-fired, tubular exchanger, induced draft hot air heaters are now available for use in commercial, industrial & agricultural applications. This line of heaters features a low profile design with a durable, powder-coated black enamel exterior and stainless steel louvers for an exceptional aesthetic appeal. Additional features include operational troubleshooting lights, swept-wing impeller with fingerproof fan guards for low noise operation and various mounting options. The FA Series can be used as separated combustion or power-vented out-of-the-box.
btu/h INPUT OUTPUT
Typical Mounting Height
Approx. AvERaGE Heat air Temp vent length Ship Throw Rise Min. Max. weight
MODEL Number
Gas Type
FA-100
Nat. or LP
100,000
80,000
12 to 14 Ft.
43 Ft.
50°F
3 Ft.
40 Ft.
143 Lbs.
FA-125
Nat. or LP
125,000 100,000
14 to 16 Ft.
57 Ft.
50°F
3 Ft.
40 Ft.
143 Lbs.
FA-150
Nat. or LP
150,000 120,000
14 to 16 Ft.
52 Ft.
50°F
3 Ft.
40 Ft.
195 Lbs.
FA-175
Nat. or LP
175,000 140,000
15 to 17 Ft.
51 Ft.
50°F
3 Ft.
40 Ft.
195 Lbs.
FA-200
Nat. or LP
200,000 160,000
15 to 17 Ft.
55 Ft.
50°F
3 Ft.
40 Ft.
195 Lbs.
FA-225
Nat. or LP
225,000 180,000
16 to 18 Ft.
59 Ft.
50°F
3 Ft.
40 Ft.
212 Lbs.
FA-250
Nat. or LP
250,000 200,000
16 to 18 Ft.
63 Ft.
50°F
3 Ft.
40 Ft.
212 Lbs.
TYPICAL APPLICATIONS
PRODUCT FEATURES Operational Indicator Lights
Swept-wing Fan Blade
• Greenhouses Stainless Steel Discharge Louvers Powder Coated Black Enamel Exterior
Aluminized Steel Tubular Heat Exchangers
• Warehouse Spaces • Service Garages • Entrance Ways • Manufacturing Facilities
Burner Sight Glass
detroit radiant products co.
• Compact, aesthetically pleasing construction. • Easy to install with minimal assembly required. • Swept wing air propeller, for noise reduction. • Indicator lights are standard. • Finger proof fan guards are standard. • Models through 125 MBH can be rotated 180˚. • ETL Listed North American Certified for indoor use.
21400 Hoover Rd. Warren, MI 48089-3162 Phone: Toll Free: Fax: Email: Website:
(586) 756-0950 1-800-222-1100 (586) 756-2626 [email protected] www.detroitradiant.com
Visit Our Website For: Product Specs Parts Support Dealer Locator Applications
C.A.D. Library Design Guidelines Theory of Infrared and More!
FA SERIES
SPECIFICATIONS PRODUCT SPECIFICATIONS
VOLTAGE:
Input Range:
100,000 to 250,000 BTU/h
Gas Type:
Natural or Propane
Burner Control Box:
Powder coated black enamel
Radiant Exchanger Tubes:
Tubular aluminized steel
Certification:
ETL Listed North America
Limited Warranty:
1-3-5 (Components-ExchangersThermostat Connection
Operational Indicator Lights:
Standard
• Non-reversible horizontal mounting. •Mounting with (4x) -3/8”-16 threaded inserts.
MANIFOLD PRESSURE:
• Natural Gas - 3.5 Inches W.C. CERTIFICATIONS: • Propane Gas - 10.0 Inches W.C. • ANSI Z83.8/CSA 2.6 • Commercial & Industrial use. INLET PRESSURE: • Indoor use only. • Natural Gas - 5.0 to 14.0” W.C. OTHER • Propane Gas - 11.0 to •External indicator lights. 14.0” W.C. • External thermostatic connection. GAS CONNECTION • Approved for elevations • FA-100-200: 1/2” N.P.T. 0 - 2,000 ft. without • FA-225-250: 3/4” N.P.T. modifications. • Field connect to valve. • Supplied standard as separated combustion.
Burners) 24V Controls:
MOUNTING:
• 120/60Hz. VAC (primary). • 24 VAC (thermostatic). • Single phase.
VENT & INLET CONNECTION: • Category l or lll venting. • Rear, horizontal discharge/inlet.
Available fa SERIES models & dimensions Model
FLA AMPS
Motor Type
MoTor HP
Fan DiaMeter
Axial Fan Rotation
Gas Connection
Inlet & Vent Connection
heater height dim “A“
air to vent dim “B”
mounts axis dim “C”
mounts axis dim “D”
FA-100
5.2
PSC
1/8
18 in.
CCW
1/2” NPT
4” O.D.
21 in.
9.375 in.
9.5 in.
19.125 in.
FA-125
5.0
PSC
1/6
18 in.
CCW
1/2” NPT
4” O.D.
21 in.
9.375 in.
9.5 in.
19.125 in.
FA-150
10.7
PSC
1/3
22 in.
CCW
1/2” NPT
6” O.D.
27 in.
12.5 in.
9.5 in.
19.125 in.
FA-175
10.7
PSC
1/3
22 in.
CCW
1/2” NPT
6” O.D.
27 in.
12.5 in.
9.5 in.
19.125 in.
FA-200
10.7
PSC
1/3
22 in.
CCW
1/2” NPT
6” O.D.
27 in.
12.5 in.
9.5 in.
19.125 in.
FA-225
10.7
PSC
1/3
22 in.
CCW
3/4” NPT
6” O.D.
30 in.
13.875 in.
9.5 in.
19.125 in.
FA-250
10.7
PSC
1/3
22 in.
CCW
3/4” NPT
6” O.D.
30 in.
13.875 in.
9.5 in.
19.125 in
13.10”
40”
4.10”
DIM.C
20”
DIM. D 40”
fa SERIES clearances All Models
front
DIM. A
Rear View
Top View
DIM. B
9.3”
4.84”
Top and Bottom
8.6”
6.12”
Access Side
Non-Access Side
Rear
Vent Connection
Clearance to Combustibles
60 in
1 in.
18 in.
1 in.
1 in.
6 in.
Clearance to Allow Service
60 in.
1 in.
18 in.
1 in.
18 in.
6 in.
Top
Top
FRONT VIEW
SIDE VIEW Front
NonAccess Side
Access Side
Bottom
Rear
DISTRIBUTED BY:
Bottom
LBFA-FA 11/13 DRP
