Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement In order to repair any part of the Macintosh PowerBook 1400c, you must first take out the battery and then take out the CD-ROM Drive.

Written By: Corinne Schnieders

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

INTRODUCTION This repair guide will show you how to replace the CD-ROM Drive.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

Step 1 — Battery 

Turn the device upside down and then locate the battery latch near the front of the device.



Slide the latch to the left to release the battery.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

Step 3 

Continue holding the latch then gently pull the battery out of the device.

 Place the battery in a safe location.

Step 4 — CD-ROM Drive 

© iFixit — CC BY-NC-SA

www.iFixit.com

Locate the CD-ROM Drive latch.

Page 4 of 5

Macintosh PowerBook 1400 Series CD-ROM Drive Replacement

Step 5 

Slide the latch to the right to release the CD ROM drive.



Continue holding the latch then gently pull the CD-ROM Drive out of the device.

Step 6

 Place the CD ROM drive in a safe location.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-10-13 08:05:04 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5