MDH Series Graphic Medallion Removal & Installation - Amazon Web ...
1/11
Instructions Subject: MDH Series Graphic Medallion Removal & Installation The graphic medallions on the MDH Series Ice/Beverage Dispensers are made out of a flexible duratran that can be removed/replaced from the front of the unit without the use of tools (back-lit merchandiser light box does not need to be removed from the unit). MDH-302
MDH-402
MEDALLION REMOVAL 1. Loosen and remove the 2 knurled screws from either the right or left side of the merchandiser frame starting with the bottom one first. Left side removal illustrated below. Note: A Phillips head screw driver may be used if the screws are too tight. 2. Remove the end portion of the frame that holds the medallion into the merchandiser. 3. With the end portion removed pull the 2 clear plastic sheets apart inside the merchandiser to expose the medallion that is sandwiched in between. 4. Pull out only the medallion leaving the 2 clear plastic sheet still inside the merchandiser.
1
2
3
4
5. To install / replace the medallion slide the medallion back in between the 2 clear plastic sheets, replace the end portion of the frame and hand tighten the knurled screws.
Manitowoc Beverage Systems Sellersburg, 2100 Future Drive, Sellersburg, IN 47172, Tel: 812-246-7000, www.manitowocbeverage.com
Instructions Subject: MDH Series Graphic Medallion Removal & Installation The graphic medallions on the MDH Series Ice/Beverage Dispensers are made out of a flexible duratran that can be removed/replaced from the front of the unit without the use of tools (back-lit merchandiser light box does not need to be removed from the unit). MDH-302
MDH-402
MEDALLION REMOVAL 1. Loosen and remove the 2 knurled screws from either the right or left side of the merchandiser frame starting with the bottom one first. Left side removal illustrated below. Note: A Phillips head screw driver may be used if the screws are too tight. 2. Remove the end portion of the frame that holds the medallion into the merchandiser. 3. With the end portion removed pull the 2 clear plastic sheets apart inside the merchandiser to expose the medallion that is sandwiched in between. 4. Pull out only the medallion leaving the 2 clear plastic sheet still inside the merchandiser.
1
2
3
4
5. To install / replace the medallion slide the medallion back in between the 2 clear plastic sheets, replace the end portion of the frame and hand tighten the knurled screws.
Manitowoc Beverage Systems Sellersburg, 2100 Future Drive, Sellersburg, IN 47172, Tel: 812-246-7000, www.manitowocbeverage.com
