Mercmaster⢠II HID Luminaires
Mercmaster™ II HID Luminaires
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Applications
• Superior corrosion-resistance: copperfree aluminum mounting hoods, ballasts and guards with epoxy powder coat, inside and out. • Standard pendant mounting hood for rigid or flexible mounting. Balanced round design automatically hangs plumb when used with flexible hanger. • Positive sealing. Hinge and bolt construction assures 360° compression at all points on gasket. • One-piece ballast housing for each component provides even heat dissipation for cooler operation and longer ballast life. • Heat barrier isolates capacitor from ballast. Standard non-PCB biodegradable capacitors installed in separate compartment. • Mogul socket is furnished with 392 °F/200 °C welded leads, pre-wired to the ballast. • Porcelain socket assures trouble-free operation in high ambient installations. • Guards protect globes from damage. Keyhole slots allow easy installation and are secured with stainless steel screws. • Prismatic glass globes and glass refractors are standard (plastic refractors also available) and thread directly into fixture housing. Eliminate glare and provide uniform light distribution. • Vented reflectors result in cooler, dirt-free operation, increased lumen output. • Reflectors secured to mounting hood with screws (furnished). • Choice of reflector styles: white porcelain enamel or Fiberglass reinforced polyester; standard dome or 30° angle. • Optional photocell provides automatic “on-off” control. • All Mercmaster mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kit listings).
Standard Materials • Mounting hoods, ballast bodies and guards: copperfree (4/10 of 1% max.) aluminum • Reflectors: fiberglass reinforced polyester • Globes: 50 W-100 W, threaded prismatic glass; 150 W, 175 W and 200W, threaded heat-resistant prismatic glass • Refractors: 50 W to 150 W, heat-resistant prismatic glass and plastic; 175 W to 200 W, prismatic glass
Standard Finishes • Mounting hoods, ballast bodies, guards: epoxy powder-coat finish. Two-coat baked finish, electrostatically applied for complete uniform surface protection • Polyester reflectors: natural finish
Options • Fuses for fixtures. For fuse kits see Electrical Specifications and Fuse Kits page. • MH fixtures for Quartz Auxiliary lamps. Relay switch installed in fixture when specified. Add suffix -MTE to fixture catalog number for 120 V through 277 V, and suffix -480E to fixture catalog number for 480 V fixture. • Smart Hot Restrike emergency option, available for 50 W-150 W HPS only. Add suffix -SR. See 50 W, 70 W, 100W, 150 W HPS page. • Hot Restrike option add suffix -R. • Smart Starter available for HPS and PSMH. Add suffix -S.
Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10444
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. Note: Fixtures equipped with optional photocell or quartz auxilliary lamp do not comply with UL requirements and are not suitable for use in classfied locations. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1005
Lighting: Enclosed and Gasketed — Area — HID
Features
Lighting
• Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries, manufacturing plants, power plants and other locations where moisture, dirt, dust or corrosive atmospheres are encountered. • Fixtures suited for Class I, Division 2; Class II, Division 1 and 2; and Class III. Suitable for use in wet and outdoor saltwater locations. • Wide range of wattages and voltages. Choice of ballasts for 100 W-200 W PSMH; and 50 W-150 W HPS lamps in 120, 208, 240, 277 and 480 voltages. • Choice of light sources: high pressure sodium and pulse start metal halide. • Choice of optical assembles: (1) prismatic globe with or without guard through 200 W; or (2) Type V closed prismatic glass refractor through 200 W. (Types II, III and IV also available through 200 W. Also polycarbonate globes for 100 W max.) • Choice of mounting hoods: pendant (rigid or flexible), 25° (angle) stanchion, ceiling and wall mounting. • Porcelain reflector for standard applications and Fiberglass reinforced polyester reflector for installations where luminaire is subject to exceptionally severe corrosive atmospheres.
Mercmaster™ II HID Luminaires
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Lighting: Enclosed and Gasketed — Area — HID
Lighting
Illustrated Features
High Temperature Sockets Mogul base high temperature socket for 50W through 400W HID lamps. Aluminum Inner Reflector Solid aluminum inner reflector improves photometric efficiency.
Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing.
"Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance.
Hood/Ballast Gasket Silicone rubber gasket seals out moisture, dirt and dust. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Fiber insulator protects ballast and capacitor.
Photocell Installs through knock-out in mounting hood; provides continuous ON-OFF duskto-dawn control. Fixtures with optional photocell or quartz auxiliary lamp do not comply with UL requirements for use in classified locations.
JB Series Box and Flexible Hanger
Balanced Round Design Pendant fixtures automatically hang plumb. Fixtures and hangers suitable for Class I, Division 2 applications.
Fuses Mount to Hood Bosses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood.
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures.
1006
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaires
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
The quartz emergency lamp socket is wired to a 120 V tap on the ballast and is therefore independent of the lighting fixture voltage. No special field wiring is necessary. Description Catalog Suffix For fixture volts of 120, 208, 240 or 277 -MTE For fixture volts of 480 -480E
The hot lamp restart option provides instant restart of 50, 70, 100 and 150 W HPS lamps after power outages of up to 10 seconds. The lamps restrike instantly at almost full lumens. For power interruptions of up to 30 seconds, the restart of the high pressure sodium lamp is also instant but at less than full lumens. The hot lamp restart accessory does not accelerate cold lamp start up or starting where the power outage is of a duration which has allowed the HPS lamp to cool.
Encapsulated HPS Smart Hot Restrike Ignition Accessory
Additional Advantages of the Smart Hot Restrike: • Protects against self destruction in the event of failed, missing or broken lamps, or socket or lead wire failure. • Prevents “End of Life” lamps from continuous cycling over long periods of time. • Remains unaffected by stray voltages, moderate overvoltages, as well as undervoltage conditions. • Drops into the background during normal lamp operation with exceptionally low insertion loss. • Fully encapsulated construction assures electrical integrity and mechanical vibration protection. • UL recognized component. Description For fixture watts of 50, 70, 100 or 150 (HPS only)
Accessory Options
Catalog Suffix -SR
Guards: Guards are die-cast copperfree aluminum with baked epoxy finish to match fixtures. Fixture supplied with stainless steel mounting screws which thread into stainless steel inserts on fixture housing to attach guard. To order fixture with guard, add suffix -G to catalog number before adding voltage suffix. Reflectors: Standard dome and 30° angle polyester reflectors. Hot Restrike: Instantly restrikes a hot HPS lamp when power is restored after a momentary outage. Available factory-installed only. To order, add suffix -R to catalog number. Quartz Emergency Light: When ordered, HPS fixtures will be supplied with a prewired special DC bayonet base socket to accept a 150W, 120V quartz lamp (not furnished) that automatically switches on when a power outage occurs. Fixtures ordered with this quartz emergency lamp feature do NOT comply with requirements for classified areas and should be used only in non-classified locations. To order, add suffix -E to catalog number and specify if a relay switch is desired. Photocell and Fuses: Photocontrol. Smart Starter: Performs as a conventional starter in lamp start-up. Removes itself from circuit at end of lamp life or if lamp is out of socket. Add suffix -S to catalog number. Smart Hot Restrike (HPS only): Will immediately restrike HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps. Add suffix -SR to catalog number.
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. * NOTE: Fixtures equipped with quartz emergency light do not comply with UL requirements and are not suitable for use in classified locations. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1007
Lighting: Enclosed and Gasketed — Area — HID
HPS Smart Hot Restrike Accessory for HPS Fixtures Mercmaster fixtures for high pressure sodium lamps can be supplied with a special ignitor (starter board). It instantly restrikes a hot high pressure sodium lamp when a momentary power interruption occurs. This special ignitor, supplied in place of the standard ignitor, is a potted solid state device, totally factory installed. It is not suitable for field installation.
Lighting
Quartz Emergency Light for Pulse Start Metal Halide or High Pressure Sodium Fixtures * Mercmaster fixtures for or metal halide and high pressure sodium lamps can be supplied with a socket to accept a 150 W 120 V quartz lamp. This D.C. bayonet base socket is in addition to the standard lamp socket. In the event of a momentary power interruption, the quartz lamp is automatically switched on. The single ended quartz lamp remains energized until the HID restrikes and reaches about 60% output.
Mercmaster™ II HID Luminaire Thermal Suitability
Class I, Division 2, Groups A, B, C, D; Class II, Division 1, Groups E, F, G UNILETS® for Use with Threaded Metal Conduit.
Lighting
Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
The following table shows maximum operating temperatures of Mercmaster fixtures for Class I, Division 2, in a 104 °F/ 40 °C ambient in free air as rated by UL. As shown, the higher the Temperature Identification Number, the cooler the fixture operates. Keep this in mind when selecting a fixture for a specific chemical listed on the Classified Area Suitability pages. Per the NEC. The temperature marking shown on fixtures shall not exceed the
ignition temperature of the gas to be encountered. To illustrate, a 400W HPS fixture, which has a UL-NEC Temperature Identification Number of 350 (619-662 °F/326-350/°C) does NOT exceed the Group D Methane (natural gas) ignition temperature of 1004 °F/ 540 °C, and is therefore suitable for use in atmospheres containing that chemical.
Mercmaster II Thermal Suitability
Watts
Type
Supply Wire Temp. (°F/°C)
50
HPS
194/90
104/40
T3
T3
T3A
T3A
T3B
T3B
T3B
T3B
70
HPS
194/90
104/40
T3
T3
T3A
T3A
T3B
T3B
T3B
T3B
100
HPS
194/90
104/40
T2C
T2C
T3
T3
T3B
T3B
T3B
T3B
150
HPS
194/90
104/40
T2A
T2A
T2B
T2B
➊
➊
➊
T3B
150
PSMH
194/90
104/40
T2B
T2B
T2D
T2D
—
—
—
—
175
PSMH
194/90
104/40
T2B
T2B
T2C
T2C
—
—
—
—
200
PSMH
194/90
104/40
T2
T2
T2B
T2B
—
—
—
—
Lighting: Enclosed and Gasketed — Area — HID
Lamp
Class I, Division 2, Groups A, B, C, D
Class II, Division 1, Groups E, F G
Ambient Temp. (°F/°C)
Globe
Globe & Reflector
8” Refractor
12” Refractor
Globe
Globe & Reflector
8” Refractor
12” Refractor
“T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number
T1
350
325
T2
T2A
T2B
T2C
T2D
T3
T3A
T3B
T3C
T4
T4A
T5
T6
Temp. Range (˚ºF)
664842
619662
574617
538572
502536
448500
421446
394419
358392
331356
322329
277320
250275
214248
187212
185
Temp Range (°C)
351450
326350
301325
281300
261280
231260
216230
201215
181200
166180
161165
136160
121135
101120
86100
85
All HPS fixtures suitable for operation at -40 °F/-40 °C; PSMH at -20 °F/-29 °C. † For specific Class I suitability of each fixture listed, see Thermal Suitability above. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ Pendant, ceiling and wall mount are suitable for groups E and F only with T3A rating. Stanchion mount is suitable for groups E, F and G with a T3B rating.
1008
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaires 50 W, 70 W, 100 W, 150 W HPS
High Power Factor (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
With Globe, With 8” Refractor Lamp Less Guard (NEMA V) Watts Pendant — One Hub, Rigid or Flexible Mounting
70 100
3/4
LPAL5075 ➌
LPAL5075J ➌
LPAL5075R ➌
1
LPAL5010 ➌
LPAL5010J ➌
LPAL5010R ➌
3/4
LPAL7075 ➍
LPAL7075J ➍
LPAL7075R ➍
1
LPAL7010 ➍
LPAL7010J ➍
LPAL7010R ➍
3/4
LPAL1075 ➍
LPAL1075J ➍
LPAL1075R ➍
1
LPAL1010 ➍
LPAL1010J ➍
LPAL1010R ➍
3/4
LPAL1575 ➍
LPAL1575J ➍
LPAL1575R ➍
1
LPAL1510 ➍
LPAL1510J ➍
LPAL1510R ➍
3/4
LPCL5075 ➌
LPCL5075J ➌
LPCL5075R ➌
1
LPCL5010 ➌
LPCL5010J ➌
LPCL5010R ➌
3/4
LPCL7075 ➍
LPCL7075J ➍
LPCL7075R ➍
1
LPCL7010 ➍
LPCL7010J ➍
LPCL7010R ➍
3/4
LPCL1075 ➍
LPCL1075J ➍
LPCL1075R ➍
With 12” Refractor
Ceiling — Five Hubs, Four Close-Up Plugs 50 70 100 150
1
LPCL1010 ➍
LPCL1010J ➍
LPCL1010R ➍
3/4
LPCL1575 ➍
LPCL1575J ➍
LPCL1575R ➍
1
LPCL1510 ➍
LPCL1510J ➍
LPCL1510R ➍
3/4
LPWBL5075 ➌
LPWBL5075J ➌
LPWBL5075R ➌
1
LPWBL5010 ➌
LPWBL5010J ➌
LPWBL5010R ➌
3/4
LPWBL7075 ➍
LPWBL7075J ➍
LPWBL7075R ➍
1
LPWBL7010 ➍
LPWBL7010J ➍
LPWBL7010R ➍
3/4
LPWBL1075 ➍
LPWBL1075J ➍
LPWBL1075R ➍
1
LPWBL1010 ➍
LPWBL1010J ➍
LPWBL1010R ➍
3/4
LPWBL1575 ➍
LPWBL1575J ➍
LPWBL1575R ➍
1
LPWBL1510 ➍
LPWBL1510J ➍
LPWBL1510R ➍
1-1/4
LPSL50125 ➌
LPSL50125J ➌
LPSL50125R ➌
1-1/2
LPSL50150 ➌
LPSL50150J ➌
LPSL50150R ➌
1-1/4
LPSL70125 ➍
LPSL70125J ➍
LPSL70125R ➍
1-1/2
LPSL70150 ➍
LPSL70150J ➍
LPSL70150R ➍
1-1/4
LPSL10125 ➍
LPSL10125J ➍
LPSL10125R ➍
1-1/2
LPSL10150 ➍
LPSL10150J ➍
LPSL10150R ➍
1-1/4
LPSL15125 ➍
LPSL15125J ➍
LPSL15125R ➍
1-1/2
LPSL15150 ➍
LPSL15150J ➍
LPSL15150R ➍
Wall — Five Hubs, Four Close-Up Plugs 50 70 100 150 25° Stanchion — One Hub 50 70 100 150
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ To order fixture with guard, add suffix -G (before adding voltage suffix). ➋ Furnished with 8” NEMA V refractor — to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). ➌ Add voltage suffix -MT for 120, 208, 240 or 277 V. ➍ Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1009
Lighting: Enclosed and Gasketed — Area — HID
150
With Globe ➊
Lighting
50
Catalog Numbers With 8” Refractor ➋
Hub Size (Inches)
Mercmaster™ II HID Luminaires 100 W, 150 W, 175 W, 200 W PSMH
Constant Wattage (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Lighting
With Globe, With 8” Refractor Lamp Less Guard (NEMA V) Watts Pendant — One Hub, Rigid or Flexible Mounting 100 150
LIGHTING: ENCLOSED AND GASKETED — AREA — HID
175 ‡ 200 ‡
Hub Size (Inches)
With Globe ➊
Catalog Numbers With 8” Refractor ➋
With 12” Refractor
3/4
LPAH1075 ➍
LPAH1075J ➍
LPAH1075R ➍
1
LPAH1010 ➍
LPAH1010J ➍
LPAH1010R ➍
3/4
LPAP1575 ➍
LPAP1575J ➍
LPAP1575R ➍
1
LPAP1510 ➍
LPAP1510J ➍
LPAP1510R ➍
3/4
LPAP1775 ➍
LPAP1775J ➍
LPAP1775R ➍ LPAP1710R ➍
1
LPAP1710 ➍
LPAP1710J ➍
3/4
LPAP2075 ➍
LPAP2075J ➍
LPAP2075R ➍
1
LPAP2010 ➍
LPAP2010J ➍
LPAP2010R ➍
3/4
LPCH1075 ➍
LPCH1075J ➍
LPCH1075R ➍
1
LPCH1010 ➍
LPCH1010J ➍
LPCH1010R ➍
3/4
LPCP1575 ➍
LPCP1575J ➍
LPCP1575R ➍
Ceiling — Five Hubs, Four Close-Up Plugs 100 150 175 ‡ 200 ‡
1
LPCP1510 ➍
LPCP1510J ➍
LPCP1510R ➍
3/4
LPCP1775 ➍
LPCP1775J ➍
LPCP1775R ➍
1
LPCP1710 ➍
LPCP1710J ➍
LPCP1710R ➍
3/4
LPCP2075 ➍
LPCP2075J ➍
LPCP2075R ➍
1
LPCP2010 ➍
LPCP2010J ➍
LPCP2010R ➍
Wall — Five Hubs, Four Close-Up Plugs 100 150 175 ‡ 200 ‡
3/4
LPWBH1075 ➍
LPWBH1075J ➍
LPWBH1075R ➍
1
LPWBH1010 ➍
LPWBH1010J ➍
LPWBH1010R ➍
3/4
LPWBP1575 ➍
LPWBP1575J ➍
LPWBP1575R ➍
1
LPWBP1510 ➍
LPWBP1510J ➍
LPWBP1510R ➍
3/4
LPWBP1775 ➍
LPWBP1775J ➍
LPWBP1775R ➍
1
LPWBP1710 ➍
LPWBP1710J ➍
LPWBP1710R ➍
3/4
LPWBP2075 ➍
LPWBP2075J ➍
LPWBP2075R ➍
1
LPWBP2010 ➍
LPWBP2010J ➍
LPWBP2010R ➍
25° Stanchion — One Hub 100 150 175 ‡ 200 ‡
1-1/4
LPSH10125 ➍
LPSH10125J ➍
LPSH10125R ➍
1-1/2
LPSH10150➍
LPSH10150J ➍
LPSH10150R ➍
1-1/4
LPSP15125 ➍
LPSP15125J ➍
LPSP15125R ➍
1-1/2
LPSP15150 ➍
LPSP15150J ➍
LPSP15150R ➍
1-1/4
LPSP17125 ➍
LPSP17125J ➍
LPSP17125R ➍
1-1/2
LPSP17150 ➍
LPSP17150J ➍
LPSP17150R ➍
1-1/4
LPSP20125 ➍
LPSP20125J ➍
LPSP20125R ➍
1-1/2
LPSP20150 ➍
LPSP20150J ➍
LPSP20150R ➍
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ To order fixture with guard, add suffix -G (before adding voltage suffix). ➋ Furnished with 8” NEMA V refractor — to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). ➌ Add voltage suffix -MT for 120, 208, 240 or 277 V. ➍ Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V.
1010
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © November 2011
Mercmaster™ II HID Luminaires Mounting Hoods and Ballast Bodies High Pressure Sodium and Pulse Start Metal Halide. Mogul Base Hoods and Ballast Housings are Copperfree Aluminum (4/10 of 1%). Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Mounting Hoods Description
Hub Size (Inches)
Catalog Number
Pendant Lighting
3/4
LPA-75
1
LPA-100
3/4
LPC-75
1
LPC-100
3/4
LPWB-75
1
LPWB-100
One Hub, Rigid or Flexible Mounting Ceiling
Wall
Five Hubs, Four Close-Up Plugs
25° Stanchion 1-1/4
LPS-125
1-1/2
LPS-150
One Hub Mounting Adapter Permits use of Mercmaster II pendant hood on existing V-51 and Mercmaster I mounting hoods. Remove Mercmaster I ballast body from existing mounting hood, thread in adapter and attach wire to Mercmaster II.
LPAD-1
Mercmaster II Ballast Bodies
Type
Ballast Body Catalog Numbers Globe/12” 8” Refractor Refractor
120V
208V
240V
277V
480V
50
LPB50L
LPBLH50R
-MT
-MT
-MT
-MT
—
Lamp Watts
Add Voltage Suffixes ➊
High Pressure Sodium High Power Factor (Min. P.F. 90%)
70
LPB70L
LPBLH70R
-MT
-MT
-MT
-MT
-480
100
LPB100L
LPBLH100R
-MT
-MT
-MT
-MT
-480
150
LPB150L
LPBLH150R
-MT
-MT
-MT
-MT
-480
100
LPB100H
LPBH100R
150
LPB150P
LPBP150R
-MT
-MT
-MT
-MT
-480
175
LPB175P
LPBP175R
-MT
-MT
-MT
-MT
-480
200
LPB200P
LPBP200R
-MT
-MT
-MT
-MT
-480
Pulse Start Metal Halide
Constant Wattage (Min. P.F. 90%)
-MTMED -MTMED -MTMED -MTMED -480MED
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ MT (multi-volt) ballasts can be operated at an input voltage of either 120, 208, 240 or 277 V. 480 ballasts can be operated at input voltage of 480 V. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1011
Lighting: Enclosed and Gasketed — Area — HID
Five Hubs, Four Close-Up Plugs
Mercmaster™ II HID Luminaire Accessories
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base
Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body.
Description
Catalog Number
Lighting: Enclosed and Gasketed — Area — HID
Lighting
Prismatic Glass Globes Clear Heat-Resistant
VPGL-2HR
Amber
VPGL-2AM
Blue
VPGL-2BL
Green
VPGL-2GR
Red
VPGL-2RE
Coated Prismatic Tuff-Skin® Glass Globes For use in areas where fixture is subject to extreme thermal shock
Clear Heat-Resistant
VPGL-2HRT
Polycarbonate Globes – Impact-Resistant ➊
Use 100W Lamp max.; do not use in ambients exceeding 77 °F/25 °C
Light Distribution
IES/NECA Distribution Curves
Clear
VPGL-2PL
Amber
VPGL-2AMPL
Green
VPGL-2GRPL
Red
VPGL-2REPL
8” Glass (50-200 W ➊)
12” Glass (50-200 W ➊)
12” Polycarbonate (50-175 W ➋)
NEMA I
LPG-R1
—
—
NEMA II
—
LPRF-2CG
LPRF-2CP
NEMA III
LPG-R3
—
LPRF-3CP
NEMA IV
—
—
LPRF-4CP
NEMA V
LPG-R5
LPRF-5CG
LPRF-5CP
Closed Prismatic Refractors — 50 W-200 W ➊
8” Refractor
12” Refractor
➊ Polycarbonate globes are shatter-resistant – for use in processing plants, canneries, dairies, bakeries or anywhere broken glass would prove a hazard. Ideally suited for areas where vandalism, high replacement and high maintenance costs are a problem. Do not use in ambients exceeding 77 °F/25 °C. For burning in vertical base-up positions only. Registered trademark of Thomas Manufacturing Corporation, Parkton, Md. It is recommended that guards be used with these globes. ➊ 150 W max. for HPS. ➋ 100 W max. for MH.
1012
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Accessories and Weights High Pressure Sodium and Pulse Start Metal Halide. Mogul Base
Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body.
Description
Catalog Number
Guard KGU2
Guard for Glass Globe
Lighting
Steel Guards for 8” and 12” Refractors LPRG2
Guard for 12” Refractor
LPBG12
3 machine screws furnished LPRG-2
LPBG-12
Polyester Reflectors
Standard Dome
Standard Dome
KR2-ST
30° Angle
KR2-AN
30° Angle
Replacement Gaskets — Silicone Rubber Globe and 12” Refractor Gasket
VPGL-GK
8” Refractor Gasket
KRF-GK
Photocell (Hazardous) 120 Volt
PC120D2
208 thru 277 Volt
PC247D2
Mounting Hood Weights Type
Weight (Lbs/Kg)
Type
Weight (Lbs/Kg)
Pendant
3/1.4
Wall
5/2.3
Ceiling
5/2.3
Stanchion
4/1.8
Reflectors and Refractors — Weight includes globe and guard
Watts
HPS
50, 70
14
—
100
15
15
150
16
175
—
200
PSMH
Catalog Wt. Lbs/Kg Number Standard Dome Reflector
Catalog Wt. Lbs/Kg Number 30° Angle Reflector
LPG-R1
13/5.9
—
5.25/2.4
LPG-R3
13/5.9
16
5.25/2.4
LPG-R5
13/5.9
2.5/1.1
KR2-AN
Catalog Wt. Lbs/Kg Number 12” Refractor
5.25/2.4
2.5/1.1
KR2-ST
Catalog Wt. Lbs/Kg Number 8” Refractor
LPRF-5CG
18
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1013
Lighting: Enclosed and Gasketed — Area — HID
Guard for 8” Refractor
Mercmaster™ II HID Luminaire Electrical Specifications and Fuse Kits High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Fuse Kit
Lighting: Enclosed and Gasketed — Area — HID
Lighting
Electrical Specifications Line Type of Starting Voltage Ballast Amps 50 Watt High Pressure Sodium 120 HX-HPF 0.58 208 HX-HPF 0.35 240 HX-HPF 0.31 277 HX-HPF 0.25 70 Watt High Pressure Sodium 120 HX-HPF 0.90 208 HX-HPF 0.50 240 HX-HPF 0.44 277 HX-HPF 0.35 480 HX-HPF 0.21 100 Watt High Pressure Sodium 120 HX-HPF 1.30 208 HX-HPF 0.76 240 HX-HPF 0.66 277 HX-HPF 0.60 480 HX-HPF 0.33 150 Watt High Pressure Sodium 120 HX-HPF 2.00 208 HX-HPF 1.15 240 HX-HPF 1.00 277 HX-HPF 0.85 480 HX-HPF 0.50 100 Watt Pulse Start Metal Halide 120 HX-HPF 1.20 208 HX-HPF 0.70 240 HX-HPF 0.61 277 HX-HPF 0.55 480 HX-HPF 0.30 150 Watt Pulse Start Metal Halide 120 HX-HPF 1.75 208 HX-HPF 1.30 240 HX-HPF 0.85 277 HX-HPF 0.77 480 C.W.A. 0.45 175 Watt Pulse Start Metal Halide 120 C.W.A. 0.90 208 C.W.A. 0.50 240 C.W.A. 0.35 277 C.W.A. 0.30 480 C.W.A. 0.25 200 Watt Pulse Start Metal Halide 120 C.W.A. 2.10 208 C.W.A. 1.15 240 C.W.A. 1.10 277 C.W.A. .75 480 C.W.A. .58
Operating Amps
Total Watts
0.58 0.33 0.29 0.25
64 64 64 64
0.82 0.48 0.41 0.36 0.21
94 94 94 94 94
1.15 0.67 0.60 0.52 0.31
130 130 130 130 135
1.70 0.95 0.85 0.72 0.47
188 188 188 188 189
1.15 0.70 0.58 0.50 0.35
130 130 130 130 140
1.60 1.00 0.80 0.70 0.42
188 188 188 188 185
1.78 1.08 0.89 0.76 0.50
199 199 199 199 213
2.00 1.25 1.00 .85 .50
238 238 238 238 237
Order fuses as a separate item by catalog number from right columns.
Lamp Watts 50
70
100
150
175
200
Volts 120 208 240 277 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480
Fuse Quantity Required 1 2 2 1 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2
Fuse Kit Catalog Number HPS PSMH F5 — F3 — F3 — F2 — F5 — F3 — F3 — F2 — F2 — F8 F6 F5 F4 F5 F3 F3 F3 F3 F2 F10 F10 F5 F5 F5 F5 F5 F4 F3 F3 — F5 — F3 — F3 — F2 — F2 — F9 — F6 — F5 — F4 — F2
Fuses are filled with non-combustible granular material. Fuse Kit includes fuse, fuse block, wire, mounting screws and connectors. All mounting hoods have provisions for easy field installation of fuses in fixtures.
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures.
1014
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Dimensions
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit.
Lighting
25° Angle Stanchion Mount
Ceiling Mount
Wall Mount
Fixture with 8” Refractor
Fixture with Guard and Polyester Reflector
Fixture with 12” Refractor
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Lighting: Enclosed and Gasketed — Area — HID
Pendant Mount
1015
Mercmaster™ II HID Luminaire Photometric Data 150 W HPS
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen).
Total Luminaire Efficiency = 86.1% CIE Type - Semi-Direct
Lighting
Plane
Spacing Criteria
0-180
2.82
90-270
2.82
Diagonal
2.82
For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp – 0.594; for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95.
REPORT NUMBER: LP15LGG 150 W High Pressure Sodium fixture with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc
Lighting: Enclosed and Gasketed — Area — HID
% Walls Rw Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110
0 1 2 3 4 5 6 7 8 9 10
Lumens 50.74 164.55 310.47 611.05 961.13 1308.18 1542.35 1716.10 1799.18 1802.19 1676.86
80
70
441.46 9.61 3.33 0.74 0.00 0.00
Total Luminaire Efficiency = 73.6% CIE Type - Direct Plane
Spacing Criteria
0-180
1.46
90-270
1.46
Diagonal
1.68 Lumens 266.98 799.41 1337.05 1732.06 2067.60 2317.60 2210.81 866.77 145.09 14.46 8.75 7.93
120-130 130-140 140-150 150-160 160-170 170-180
4.51 2.16 0.48 0.00 0.00 0.00
1016
10
0
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
95 81 71 64 57 52 48 44 40 38 35
95 74 62 52 45 40 35 31 28 25 23
95 69 54 44 36 31 26 23 20 18 16
95 64 47 37 30 24 20 17 15 13 11
89 75 65 58 53 48 44 40 37 35 32
89 69 57 48 42 37 32 29 26 24 22
89 64 50 41 34 29 25 21 19 17 15
89 59 44 34 28 23 19 16 14 12 11
77 59 49 41 35 31 27 24 22 20 18
77 55 43 35 29 24 21 18 16 14 13
77 51 38 30 24 19 16 14 12 10 9
67 50 41 34 29 26 23 20 18 17 15
67 47 36 29 24 20 17 15 13 12 11
67 44 32 25 20 16 13 11 10 8 7
57 42 33 28 24 21 18 16 15 14 13
57 39 30 24 19 16 14 12 11 10 9
57 37 27 20 16 13 11 9 8 7 6
53 33 23 17 13 10 8 7 6 5 4
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 525.75 1136.81 3406.12 8463.75
% Lamp 3.3 7.1 21.3 52.9
% Fixture 3.8 8.3 24.7 61.4
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 4858.16 5299.62 5312.56 5313.30 13777.05
% Lamp 30.4 33.1 33.2 33.2 86.1
% Fixture 35.3 38.5 38.5 38.6 100.0
REPORT NUMBER: LP15LST 150 W High Pressure Sodium fixture with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
30
50
110-120 1379.11 120-130 130-140 140-150 150-160 160-170 170-180
50
70
0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
88 79 71 64 58 53 49 45 42 39 36
88 76 65 56 49 43 38 34 31 28 26
88 72 59 49 42 36 31 27 24 22 20
88 69 55 44 36 31 26 23 20 18 16
86 77 69 62 57 52 47 44 40 38 35
86 74 63 55 48 42 38 34 31 28 26
86 71 58 49 41 35 31 27 24 22 20
86 68 54 44 36 30 26 23 20 18 16
82 71 61 52 46 40 36 33 30 27 25
82 68 57 47 40 35 30 27 24 21 19
82 66 53 43 36 30 26 22 20 17 16
78 68 58 50 44 39 35 31 29 26 24
78 66 55 46 39 34 30 26 23 21 19
78 64 52 42 35 30 25 22 19 17 16
75 65 56 48 42 38 34 30 28 25 23
75 64 53 45 38 33 29 26 23 21 19
75 62 50 41 35 29 25 22 19 17 15
73 60 49 40 33 28 24 20 18 16 14
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 2403.44 4135.50 8520.70 11743.37
% Lamp 15.0 25.8 53.3 73.4
% Fixture 20.4 35.1 72.3 99.7
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 31.14 35.65 38.29 38.29 11781.65
% Lamp 0.2 0.2 0.2 0.3 73.6
% Fixture 0.3 0.3 0.3 0.3 100.0
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Photometric Data 150 W HPS
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen).
Total Luminaire Efficiency = 73.1% CIE Type - Direct Plane
Spacing Criteria 2.06
90-270
1.58
Diagonal
1.62
REPORT NUMBER: LP15LAN 150 W High Pressure Sodium fixture with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw
Lumens 222.62 664.60 1084.32 1536.55 1771.90 1771.51 1668.93 1422.36 994.54 432.23 104.58 20.99
120-130 130-140 140-150 150-160 160-170 170-180
1.21 0.04 0.00 0.00 0.00 0.00
Total Luminaire Efficiency = 81.1% CIE Type - Semi-Direct Plane
Spacing Criteria
0-180
1.98
90-270
1.98
Diagonal
3.40
0 1 2 3 4 5 6 7 8 9 10
Lumens 72.83 222.26 380.73 621.11 852.53 1765.29 3192.58 2366.61 1230.65 450.14 712.41 499.15
120-130 130-140 140-150 150-160 160-170 170-180
323.44 185.00 81.31 21.08 2.81 0.00
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
86 76 68 61 55 50 46 43 40 37 35
86 71 60 52 45 40 36 32 29 26 24
86 67 54 45 38 33 28 25 22 20 18
86 63 49 39 32 27 23 20 18 16 14
84 73 65 59 53 49 45 41 38 36 33
84 69 58 50 44 39 35 31 28 26 24
84 65 53 44 37 32 28 25 22 20 18
84 62 48 39 32 27 23 20 17 16 14
79 65 55 48 42 37 33 30 27 25 23
79 62 50 42 36 31 27 24 21 19 17
79 59 46 37 31 26 22 19 17 15 14
75 62 52 45 39 35 31 28 26 24 22
75 59 48 40 34 30 26 23 21 19 17
75 57 45 36 30 25 22 19 17 15 13
71 58 49 43 37 33 30 27 25 23 21
71 56 46 39 33 29 25 22 20 18 16
71 54 43 35 29 25 21 19 16 15 13
70 52 41 33 27 23 20 17 15 13 12
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 1971.54 3508.09 7051.50 11137.33
% Lamp 12.3 21.9 44.1 69.6
% Fixture 16.9 30.0 60.3 95.2
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 557.80 559.01 559.04 559.04 11696.38
% Lamp 3.5 3.5 3.5 3.5 73.1
% Fixture 4.8 4.8 4.8 4.8 100.0
REPORT NUMBER: LP15LJ 150 W High Pressure Sodium fixture with 8” Prismatic Glass Reractor - NEMA Type V * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
80
0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
93 80 69 61 54 49 45 41 38 35 33
93 73 59 49 42 36 32 28 25 23 21
93 68 51 40 32 27 23 20 17 15 14
93 63 45 33 25 20 16 14 12 10 9
89 76 65 57 51 46 42 38 36 33 31
89 70 56 47 40 34 30 27 24 22 20
89 65 49 38 31 26 22 19 16 15 13
89 61 43 32 24 19 16 13 11 10 9
82 64 51 42 35 31 27 24 22 20 18
82 60 45 35 28 23 20 17 15 13 12
82 56 40 29 22 18 14 12 10 9 8
76 58 46 38 32 27 24 24 19 18 16
76 55 41 32 26 21 18 15 14 12 11
76 52 37 27 21 16 13 11 9 8 7
70 53 41 34 28 24 21 19 17 16 15
70 50 37 29 23 19 16 14 12 11 10
70 48 34 25 19 15 12 10 8 7 6
67 45 31 22 16 12 10 8 6 5 5
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Lumens 675.83 1296.93 3914.76 10704.60
% Lamp 4.2 8.1 24.5 66.9
% Fixture 5.2 10.0 30.2 82.5
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 1661.70 1985.14 2251.45 2275.34 12979.94
% Lamp 10.4 12.4 14.1 14.2 81.1
% Fixture 12.8 15.3 15.3 17.5 100.0
1017
Lighting: Enclosed and Gasketed — Area — HID
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Lighting
0-180
For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp – 0.594; for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95.
Mercmaster™ II HID Luminaire Photometric Data 175 W PSMH
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen).
Total Luminaire Efficiency = 75.4% CIE Type - General Diffuse
Lighting
Plane
Spacing Criteria
0-180
n/a
90-270
n/a
Diagonal
n/a
For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp – 1.36; for 100 W (8,500 lumen) PSMH lamp – 0.49. For candlepower values of fixture with guard, multiply by 0.95.
REPORT NUMBER: LP17PGG 175 W Pulse Start Metal Halide fixture with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc
Lighting: Enclosed and Gasketed — Area — HID
% Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110
Lumens 42.67 151.27 305.99 587.79 880.58 1114.51 1306.71 1568.03 1720.24 1797.50 1750.20
110-120
1559.14
120-130 130-140 140-150 150-160 160-170 170-180
391.09 7.81 3.19 0.61 0.18 0.00
Total Luminaire Efficiency = 63.8% CIE Type - Direct Plane
Spacing Criteria
0-180
1.50
90-270
1.50
Diagonal
1.66
0 1 2 3 4 5 6 7 8 9 10
Lumens 271.72 817.50 1392.53 1749.97 2044.83 2121.25 1862.42 720.46 141.89 14.66 8.28 9.57
120-130 130-140 140-150 150-160 160-170 170-180
5.69 3.14 2.17 1.71 1.70 0.36
1018
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
82 70 62 55 50 46 42 38 35 33 31
82 65 54 46 40 35 31 27 25 22 20
82 60 47 38 32 27 23 20 18 16 14
82 55 42 33 26 22 18 15 13 12 10
77 65 57 51 46 42 38 35 32 30 28
77 60 50 42 37 32 28 25 23 21 19
77 56 44 36 30 25 22 19 17 15 13
77 52 39 30 24 20 17 14 12 11 9
66 51 42 35 31 27 24 21 19 17 16
66 47 37 30 25 21 18 16 14 13 11
66 44 33 26 21 17 14 12 10 9 8
57 42 35 29 25 22 20 18 16 14 13
57 40 31 25 21 17 15 13 12 10 9
57 37 28 21 17 14 12 10 9 7 7
48 35 28 23 20 17 15 14 13 12 11
48 33 25 20 16 14 12 10 9 8 7
48 31 22 17 13 11 9 8 7 6 5
44 27 19 14 11 8 7 6 5 4 3
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 499.93 1087.72 3082.80 7677.78
% Lamp 2.9 6.2 17.6 43.9
% Fixture 3.8 8.2 23.4 58.2
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 5106.84 5497.93 5508.93 5509.71 13187.48.
% Lamp 29.2 31.4 31.5 31.5 75.4
% Fixture 38.7 41.7 41.7 41.8 100.0
REPORT NUMBER: LP17PST 175 W Pulse Start Metal Halide fixture with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Rw
80
Rw 0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
76 69 62 56 51 47 43 40 37 34 32
76 66 57 49 43 38 34 31 28 25 23
76 63 52 44 37 32 28 25 22 20 18
76 61 48 39 33 28 24 21 18 16 15
74 67 61 55 50 45 42 39 36 33 31
74 65 56 48 42 37 33 30 27 25 23
74 62 51 43 37 32 28 25 22 20 18
74 60 48 39 33 28 24 21 18 16 15
71 62 53 46 41 36 32 29 26 24 22
71 60 50 42 36 31 27 24 22 19 18
71 58 47 38 32 27 23 20 18 16 14
68 59 51 45 39 35 31 28 26 23 22
68 57 48 41 35 30 27 24 21 19 17
68 56 46 38 32 27 23 20 18 16 14
65 57 49 43 38 33 30 27 25 23 21
65 55 47 40 34 30 26 23 21 19 17
65 54 45 37 31 27 23 20 18 16 14
64 53 43 35 30 25 22 19 16 15 13
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 2481.75 4231.72 8397.80 11122.57
% Lamp 14.2 24.2 48.0 63.6
% Fixture 22.2 37.9 75.2 99.6
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 32.51 38.20 43.51 47.28 11169.85
% Lamp 0.2 0.2 0.2 0.3 63.8
% Fixture 0.3 0.3 0.3 0.4 100.0
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Photometric Data 175 W PSMH
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen).
Total Luminaire Efficiency = 61.6% CIE Type - Direct Plane
Spacing Criteria 2.02
90-270
1.62
Diagonal
1.58
REPORT NUMBER: LP17PAN 175 W Pulse Start Metal Halide fixture with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls
Lumens 221.01 674.48 1111.79 1519.14 1697.13 1644.77 1457.83 1248.84 814.94 280.33 87.54 16.66
120-130 130-140 140-150 150-160 160-170 170-180
1.25 0.06 0.06 0.00 0.00 0.00
Total Luminaire Efficiency = 73.9% CIE Type - Semi-Direct Plane
Spacing Criteria
0-180
2.08
90-270
2.08
Diagonal
3.78
0 1 2 3 4 5 6 7 8 9 10
Lumens 58.60 179.87 316.74 543.99 726.99 1445.41 3661.34 2432.42 1351.63 477.79 717.26 474.07
120-130 130-140 140-150 150-160 160-170 170-180
293.44 163.08 70.40 18.48 2.58 0.00
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
73 64 58 52 47 43 40 37 34 32 30
73 61 52 45 39 34 31 28 25 23 21
73 57 46 39 33 28 25 22 20 18 16
73 54 42 34 28 24 20 18 16 14 13
71 62 56 50 46 42 38 35 33 31 29
71 59 50 43 38 34 30 27 25 23 21
71 56 45 38 32 28 24 22 19 17 16
71 53 42 34 28 24 20 18 16 14 12
67 56 47 41 36 32 29 26 24 22 20
67 53 44 36 31 27 24 21 19 17 15
67 51 40 33 27 23 20 17 15 14 12
64 53 45 39 34 30 27 25 23 21 19
64 51 42 35 30 26 23 20 18 17 15
64 49 39 32 27 23 20 17 15 13 12
61 50 43 37 33 29 26 24 22 20 18
61 49 40 34 29 25 22 20 18 16 15
61 47 38 31 26 22 19 17 15 13 12
59 45 36 29 24 21 18 15 14 12 11
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 2007.28 3526.41 6868.32 10389.94
% Lamp 11.5 20.2 39.2 59.4
% Fixture 18.6 32.7 63.7 96.4
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 384.53 385.77 385.89 385.89 10775.83
% Lamp 2.2 2.2 2.2 2.2 61.6
% Fixture 3.6 3.6 3.6 3.6 100.0
REPORT NUMBER: LP17PJ 175 W Pulse Start Metal Halide fixture with Globe and 8” Prismatic Glass Reractor - NEMA Type V * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Rw
80
Rw 0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
85 72 62 55 49 44 40 37 34 31 29
85 66 53 44 37 32 28 25 22 20 18
85 61 46 35 28 23 20 17 15 13 12
85 56 39 29 22 17 14 12 10 8 7
82 68 59 51 46 41 37 34 32 30 28
82 63 51 41 35 30 26 23 21 19 18
82 58 44 34 27 22 19 16 14 13 11
82 54 38 28 21 16 13 11 9 8 7
75 57 46 37 31 27 24 21 19 17 16
75 54 40 31 24 20 17 15 13 11 10
75 50 35 25 19 15 12 10 8 7 6
69 52 41 33 28 24 21 19 17 16 14
69 49 36 28 22 18 15 13 12 10 9
69 46 32 23 17 14 11 9 8 7 6
64 47 37 30 25 21 19 17 15 14 13
64 45 33 25 20 16 14 12 10 9 8
64 43 30 21 16 12 10 8 7 6 5
61 40 27 19 13 10 8 6 5 4 4
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Lumens 555.22 1099.21 3271.60 10717.00
% Lamp 3.2 6.3 18.7 61.2
% Fixture 4.3 8.5 25.3 82.9
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 1669.13 1962.57 2196.06 2217.10 12934.11
% Lamp 9.5 11.2 12.5 12.7 73.9
% Fixture 12.9 15.2 15.2 17.1 100.0
1019
Lighting: Enclosed and Gasketed — Area — HID
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Lighting
0-180
For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp – 1.36; for 100 W (8,500 lumen) PSMH lamp – 0.49. For candlepower values of fixture with guard, multiply by 0.95.
Mercmaster™ II HID Luminaire Isofootcandle Data
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit.
Lighting
HPS Lamp Wattage
Horizontal Distance from Mounting Point (Ft/M)
Mounting Height (Ft/M)
0/0 5/1.5 10/3.0 15/4.6 Mercmaster II, High Pressure Sodium, No Reflector, No Guard 70 Watt – 5,800 Lumen 100 Watt – 9,500 Lumen 150 Watt – 16,000 Lumen
20/6.1
25/7.6
30/9.1
35/10.7
40/12.2
45/13.7
50/15.2
Lighting: Enclosed and Gasketed — Area — HID
Footcandle Chart (Initial Horiz. FTC)
70
100
150
8/2.4
.60
2.70
1.50
.73
.38
.21
.13
.08
.06
.04
.03
10/3.0
.39
1.70
1.30
.72
.40
.24
.15
.10
.07
.05
.04
12/3.7
.27
1.10
1.10
.68
.41
.26
.17
.11
.08
.06
.04
15/4.6
.17
.66
.81
.60
.39
.26
.18
.13
.09
.07
.05
20/6.1
.10
.37
.43
.40
.33
.25
.18
.13
.10
.08
.06
8/2.4
1.00
4.80
2.70
1.20
.62
.35
.21
.14
.10
.07
.05
10/3.0
.64
2.80
2.20
1.30
.67
.40
.25
.16
.11
.08
.06
12/3.7
.44
1.80
1.80
1.30
.71
.42
.28
.18
.13
.09
.07
15/4.6
.28
1.10
1.30
.97
.70
.45
.30
.21
.15
.11
.08
20/6.1
.16
.59
.69
.70
.55
.42
.32
.23
.17
.13
.10
8/2.4
2.50
8.30
4.60
2.20
1.10
.62
.38
.25
.17
.12
.09
10/3.0
1.60
5.40
4.00
2.20
1.20
.71
.44
.29
.20
.14
.11
12/3.7
1.10
4.20
3.30
2.00
1.20
.76
.49
.33
.23
.17
.12
15/4.6
.72
2.10
2.40
1.80
1.20
.79
.54
.38
.27
.20
.15
20/6.1
.40
1.10
1.30
1.30
1.00
.73
.54
.40
.30
.23
.18
Mercmaster II, High Pressure Sodium, With Reflector, No Guard 70 Watt – 5,800 Lumen 100 Watt – 9,500 Lumen 150 Watt – 16,000 Lumen Footcandle Chart (Initial Horiz. FTC)
70
100
150
1020
8/2.4
14.80
10.00
3.80
1.50
.55
.15
.05
.03
.02
.01
.01
10/3.0
9.50
7.70
3.70
1.60
.74
.32
.12
.05
.03
.02
.01
12/3.7
6.60
6.60
3.30
1.50
.87
.46
.18
.10
.05
.02
.02
15/4.6
4.20
4.20
2.70
1.70
.94
.56
.33
.18
.10
.06
.03
20/6.1
2.40
2.50
1.90
1.30
.92
.62
.41
.28
.18
.12
.08
8/2.4
21.90
16.80
6.30
2.40
.86
.28
.08
.05
.03
.02
.01
10/3.0
14.00
12.40
6.00
2.70
1.20
.53
.19
.07
.04
.03
.02
12/3.7
9.70
9.40
5.50
2.80
1.40
.73
.36
.20
.13
.04
.03
15/4.6
6.20
6.70
4.40
2.70
1.60
.90
.53
.33
.19
.11
.05
20/6.1
3.50
4.30
3.10
2.20
1.50
1.0
.68
.44
.30
.21
.13
8/2.4
36.90
27.80
10.50
3.80
1.30
.35
.14
.08
.04
.03
.02
10/3.0
23.60
20.80
10.10
4.40
2.00
.78
.29
.11
.07
.04
.03
12/3.7
16.40
15.80
9.20
4.60
2.20
1.20
.54
.30
.16
.06
.04
15/4.6
10.50
11.60
7.50
4.50
2.60
1.50
.86
.42
.26
.16
.08
20/6.1
5.90
7.20
5.20
3.70
2.50
1.70
1.10
.73
.50
.32
.19
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Applications
• Superior corrosion-resistance: copperfree aluminum mounting hoods, ballasts and guards with epoxy powder coat, inside and out. • Standard pendant mounting hood for rigid or flexible mounting. Balanced round design automatically hangs plumb when used with flexible hanger. • Positive sealing. Hinge and bolt construction assures 360° compression at all points on gasket. • One-piece ballast housing for each component provides even heat dissipation for cooler operation and longer ballast life. • Heat barrier isolates capacitor from ballast. Standard non-PCB biodegradable capacitors installed in separate compartment. • Mogul socket is furnished with 392 °F/200 °C welded leads, pre-wired to the ballast. • Porcelain socket assures trouble-free operation in high ambient installations. • Guards protect globes from damage. Keyhole slots allow easy installation and are secured with stainless steel screws. • Prismatic glass globes and glass refractors are standard (plastic refractors also available) and thread directly into fixture housing. Eliminate glare and provide uniform light distribution. • Vented reflectors result in cooler, dirt-free operation, increased lumen output. • Reflectors secured to mounting hood with screws (furnished). • Choice of reflector styles: white porcelain enamel or Fiberglass reinforced polyester; standard dome or 30° angle. • Optional photocell provides automatic “on-off” control. • All Mercmaster mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kit listings).
Standard Materials • Mounting hoods, ballast bodies and guards: copperfree (4/10 of 1% max.) aluminum • Reflectors: fiberglass reinforced polyester • Globes: 50 W-100 W, threaded prismatic glass; 150 W, 175 W and 200W, threaded heat-resistant prismatic glass • Refractors: 50 W to 150 W, heat-resistant prismatic glass and plastic; 175 W to 200 W, prismatic glass
Standard Finishes • Mounting hoods, ballast bodies, guards: epoxy powder-coat finish. Two-coat baked finish, electrostatically applied for complete uniform surface protection • Polyester reflectors: natural finish
Options • Fuses for fixtures. For fuse kits see Electrical Specifications and Fuse Kits page. • MH fixtures for Quartz Auxiliary lamps. Relay switch installed in fixture when specified. Add suffix -MTE to fixture catalog number for 120 V through 277 V, and suffix -480E to fixture catalog number for 480 V fixture. • Smart Hot Restrike emergency option, available for 50 W-150 W HPS only. Add suffix -SR. See 50 W, 70 W, 100W, 150 W HPS page. • Hot Restrike option add suffix -R. • Smart Starter available for HPS and PSMH. Add suffix -S.
Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10444
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. Note: Fixtures equipped with optional photocell or quartz auxilliary lamp do not comply with UL requirements and are not suitable for use in classfied locations. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1005
Lighting: Enclosed and Gasketed — Area — HID
Features
Lighting
• Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries, manufacturing plants, power plants and other locations where moisture, dirt, dust or corrosive atmospheres are encountered. • Fixtures suited for Class I, Division 2; Class II, Division 1 and 2; and Class III. Suitable for use in wet and outdoor saltwater locations. • Wide range of wattages and voltages. Choice of ballasts for 100 W-200 W PSMH; and 50 W-150 W HPS lamps in 120, 208, 240, 277 and 480 voltages. • Choice of light sources: high pressure sodium and pulse start metal halide. • Choice of optical assembles: (1) prismatic globe with or without guard through 200 W; or (2) Type V closed prismatic glass refractor through 200 W. (Types II, III and IV also available through 200 W. Also polycarbonate globes for 100 W max.) • Choice of mounting hoods: pendant (rigid or flexible), 25° (angle) stanchion, ceiling and wall mounting. • Porcelain reflector for standard applications and Fiberglass reinforced polyester reflector for installations where luminaire is subject to exceptionally severe corrosive atmospheres.
Mercmaster™ II HID Luminaires
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Lighting: Enclosed and Gasketed — Area — HID
Lighting
Illustrated Features
High Temperature Sockets Mogul base high temperature socket for 50W through 400W HID lamps. Aluminum Inner Reflector Solid aluminum inner reflector improves photometric efficiency.
Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing.
"Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance.
Hood/Ballast Gasket Silicone rubber gasket seals out moisture, dirt and dust. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Fiber insulator protects ballast and capacitor.
Photocell Installs through knock-out in mounting hood; provides continuous ON-OFF duskto-dawn control. Fixtures with optional photocell or quartz auxiliary lamp do not comply with UL requirements for use in classified locations.
JB Series Box and Flexible Hanger
Balanced Round Design Pendant fixtures automatically hang plumb. Fixtures and hangers suitable for Class I, Division 2 applications.
Fuses Mount to Hood Bosses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood.
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures.
1006
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaires
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
The quartz emergency lamp socket is wired to a 120 V tap on the ballast and is therefore independent of the lighting fixture voltage. No special field wiring is necessary. Description Catalog Suffix For fixture volts of 120, 208, 240 or 277 -MTE For fixture volts of 480 -480E
The hot lamp restart option provides instant restart of 50, 70, 100 and 150 W HPS lamps after power outages of up to 10 seconds. The lamps restrike instantly at almost full lumens. For power interruptions of up to 30 seconds, the restart of the high pressure sodium lamp is also instant but at less than full lumens. The hot lamp restart accessory does not accelerate cold lamp start up or starting where the power outage is of a duration which has allowed the HPS lamp to cool.
Encapsulated HPS Smart Hot Restrike Ignition Accessory
Additional Advantages of the Smart Hot Restrike: • Protects against self destruction in the event of failed, missing or broken lamps, or socket or lead wire failure. • Prevents “End of Life” lamps from continuous cycling over long periods of time. • Remains unaffected by stray voltages, moderate overvoltages, as well as undervoltage conditions. • Drops into the background during normal lamp operation with exceptionally low insertion loss. • Fully encapsulated construction assures electrical integrity and mechanical vibration protection. • UL recognized component. Description For fixture watts of 50, 70, 100 or 150 (HPS only)
Accessory Options
Catalog Suffix -SR
Guards: Guards are die-cast copperfree aluminum with baked epoxy finish to match fixtures. Fixture supplied with stainless steel mounting screws which thread into stainless steel inserts on fixture housing to attach guard. To order fixture with guard, add suffix -G to catalog number before adding voltage suffix. Reflectors: Standard dome and 30° angle polyester reflectors. Hot Restrike: Instantly restrikes a hot HPS lamp when power is restored after a momentary outage. Available factory-installed only. To order, add suffix -R to catalog number. Quartz Emergency Light: When ordered, HPS fixtures will be supplied with a prewired special DC bayonet base socket to accept a 150W, 120V quartz lamp (not furnished) that automatically switches on when a power outage occurs. Fixtures ordered with this quartz emergency lamp feature do NOT comply with requirements for classified areas and should be used only in non-classified locations. To order, add suffix -E to catalog number and specify if a relay switch is desired. Photocell and Fuses: Photocontrol. Smart Starter: Performs as a conventional starter in lamp start-up. Removes itself from circuit at end of lamp life or if lamp is out of socket. Add suffix -S to catalog number. Smart Hot Restrike (HPS only): Will immediately restrike HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps. Add suffix -SR to catalog number.
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. * NOTE: Fixtures equipped with quartz emergency light do not comply with UL requirements and are not suitable for use in classified locations. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1007
Lighting: Enclosed and Gasketed — Area — HID
HPS Smart Hot Restrike Accessory for HPS Fixtures Mercmaster fixtures for high pressure sodium lamps can be supplied with a special ignitor (starter board). It instantly restrikes a hot high pressure sodium lamp when a momentary power interruption occurs. This special ignitor, supplied in place of the standard ignitor, is a potted solid state device, totally factory installed. It is not suitable for field installation.
Lighting
Quartz Emergency Light for Pulse Start Metal Halide or High Pressure Sodium Fixtures * Mercmaster fixtures for or metal halide and high pressure sodium lamps can be supplied with a socket to accept a 150 W 120 V quartz lamp. This D.C. bayonet base socket is in addition to the standard lamp socket. In the event of a momentary power interruption, the quartz lamp is automatically switched on. The single ended quartz lamp remains energized until the HID restrikes and reaches about 60% output.
Mercmaster™ II HID Luminaire Thermal Suitability
Class I, Division 2, Groups A, B, C, D; Class II, Division 1, Groups E, F, G UNILETS® for Use with Threaded Metal Conduit.
Lighting
Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
The following table shows maximum operating temperatures of Mercmaster fixtures for Class I, Division 2, in a 104 °F/ 40 °C ambient in free air as rated by UL. As shown, the higher the Temperature Identification Number, the cooler the fixture operates. Keep this in mind when selecting a fixture for a specific chemical listed on the Classified Area Suitability pages. Per the NEC. The temperature marking shown on fixtures shall not exceed the
ignition temperature of the gas to be encountered. To illustrate, a 400W HPS fixture, which has a UL-NEC Temperature Identification Number of 350 (619-662 °F/326-350/°C) does NOT exceed the Group D Methane (natural gas) ignition temperature of 1004 °F/ 540 °C, and is therefore suitable for use in atmospheres containing that chemical.
Mercmaster II Thermal Suitability
Watts
Type
Supply Wire Temp. (°F/°C)
50
HPS
194/90
104/40
T3
T3
T3A
T3A
T3B
T3B
T3B
T3B
70
HPS
194/90
104/40
T3
T3
T3A
T3A
T3B
T3B
T3B
T3B
100
HPS
194/90
104/40
T2C
T2C
T3
T3
T3B
T3B
T3B
T3B
150
HPS
194/90
104/40
T2A
T2A
T2B
T2B
➊
➊
➊
T3B
150
PSMH
194/90
104/40
T2B
T2B
T2D
T2D
—
—
—
—
175
PSMH
194/90
104/40
T2B
T2B
T2C
T2C
—
—
—
—
200
PSMH
194/90
104/40
T2
T2
T2B
T2B
—
—
—
—
Lighting: Enclosed and Gasketed — Area — HID
Lamp
Class I, Division 2, Groups A, B, C, D
Class II, Division 1, Groups E, F G
Ambient Temp. (°F/°C)
Globe
Globe & Reflector
8” Refractor
12” Refractor
Globe
Globe & Reflector
8” Refractor
12” Refractor
“T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number
T1
350
325
T2
T2A
T2B
T2C
T2D
T3
T3A
T3B
T3C
T4
T4A
T5
T6
Temp. Range (˚ºF)
664842
619662
574617
538572
502536
448500
421446
394419
358392
331356
322329
277320
250275
214248
187212
185
Temp Range (°C)
351450
326350
301325
281300
261280
231260
216230
201215
181200
166180
161165
136160
121135
101120
86100
85
All HPS fixtures suitable for operation at -40 °F/-40 °C; PSMH at -20 °F/-29 °C. † For specific Class I suitability of each fixture listed, see Thermal Suitability above. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ Pendant, ceiling and wall mount are suitable for groups E and F only with T3A rating. Stanchion mount is suitable for groups E, F and G with a T3B rating.
1008
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaires 50 W, 70 W, 100 W, 150 W HPS
High Power Factor (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
With Globe, With 8” Refractor Lamp Less Guard (NEMA V) Watts Pendant — One Hub, Rigid or Flexible Mounting
70 100
3/4
LPAL5075 ➌
LPAL5075J ➌
LPAL5075R ➌
1
LPAL5010 ➌
LPAL5010J ➌
LPAL5010R ➌
3/4
LPAL7075 ➍
LPAL7075J ➍
LPAL7075R ➍
1
LPAL7010 ➍
LPAL7010J ➍
LPAL7010R ➍
3/4
LPAL1075 ➍
LPAL1075J ➍
LPAL1075R ➍
1
LPAL1010 ➍
LPAL1010J ➍
LPAL1010R ➍
3/4
LPAL1575 ➍
LPAL1575J ➍
LPAL1575R ➍
1
LPAL1510 ➍
LPAL1510J ➍
LPAL1510R ➍
3/4
LPCL5075 ➌
LPCL5075J ➌
LPCL5075R ➌
1
LPCL5010 ➌
LPCL5010J ➌
LPCL5010R ➌
3/4
LPCL7075 ➍
LPCL7075J ➍
LPCL7075R ➍
1
LPCL7010 ➍
LPCL7010J ➍
LPCL7010R ➍
3/4
LPCL1075 ➍
LPCL1075J ➍
LPCL1075R ➍
With 12” Refractor
Ceiling — Five Hubs, Four Close-Up Plugs 50 70 100 150
1
LPCL1010 ➍
LPCL1010J ➍
LPCL1010R ➍
3/4
LPCL1575 ➍
LPCL1575J ➍
LPCL1575R ➍
1
LPCL1510 ➍
LPCL1510J ➍
LPCL1510R ➍
3/4
LPWBL5075 ➌
LPWBL5075J ➌
LPWBL5075R ➌
1
LPWBL5010 ➌
LPWBL5010J ➌
LPWBL5010R ➌
3/4
LPWBL7075 ➍
LPWBL7075J ➍
LPWBL7075R ➍
1
LPWBL7010 ➍
LPWBL7010J ➍
LPWBL7010R ➍
3/4
LPWBL1075 ➍
LPWBL1075J ➍
LPWBL1075R ➍
1
LPWBL1010 ➍
LPWBL1010J ➍
LPWBL1010R ➍
3/4
LPWBL1575 ➍
LPWBL1575J ➍
LPWBL1575R ➍
1
LPWBL1510 ➍
LPWBL1510J ➍
LPWBL1510R ➍
1-1/4
LPSL50125 ➌
LPSL50125J ➌
LPSL50125R ➌
1-1/2
LPSL50150 ➌
LPSL50150J ➌
LPSL50150R ➌
1-1/4
LPSL70125 ➍
LPSL70125J ➍
LPSL70125R ➍
1-1/2
LPSL70150 ➍
LPSL70150J ➍
LPSL70150R ➍
1-1/4
LPSL10125 ➍
LPSL10125J ➍
LPSL10125R ➍
1-1/2
LPSL10150 ➍
LPSL10150J ➍
LPSL10150R ➍
1-1/4
LPSL15125 ➍
LPSL15125J ➍
LPSL15125R ➍
1-1/2
LPSL15150 ➍
LPSL15150J ➍
LPSL15150R ➍
Wall — Five Hubs, Four Close-Up Plugs 50 70 100 150 25° Stanchion — One Hub 50 70 100 150
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ To order fixture with guard, add suffix -G (before adding voltage suffix). ➋ Furnished with 8” NEMA V refractor — to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). ➌ Add voltage suffix -MT for 120, 208, 240 or 277 V. ➍ Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1009
Lighting: Enclosed and Gasketed — Area — HID
150
With Globe ➊
Lighting
50
Catalog Numbers With 8” Refractor ➋
Hub Size (Inches)
Mercmaster™ II HID Luminaires 100 W, 150 W, 175 W, 200 W PSMH
Constant Wattage (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Lighting
With Globe, With 8” Refractor Lamp Less Guard (NEMA V) Watts Pendant — One Hub, Rigid or Flexible Mounting 100 150
LIGHTING: ENCLOSED AND GASKETED — AREA — HID
175 ‡ 200 ‡
Hub Size (Inches)
With Globe ➊
Catalog Numbers With 8” Refractor ➋
With 12” Refractor
3/4
LPAH1075 ➍
LPAH1075J ➍
LPAH1075R ➍
1
LPAH1010 ➍
LPAH1010J ➍
LPAH1010R ➍
3/4
LPAP1575 ➍
LPAP1575J ➍
LPAP1575R ➍
1
LPAP1510 ➍
LPAP1510J ➍
LPAP1510R ➍
3/4
LPAP1775 ➍
LPAP1775J ➍
LPAP1775R ➍ LPAP1710R ➍
1
LPAP1710 ➍
LPAP1710J ➍
3/4
LPAP2075 ➍
LPAP2075J ➍
LPAP2075R ➍
1
LPAP2010 ➍
LPAP2010J ➍
LPAP2010R ➍
3/4
LPCH1075 ➍
LPCH1075J ➍
LPCH1075R ➍
1
LPCH1010 ➍
LPCH1010J ➍
LPCH1010R ➍
3/4
LPCP1575 ➍
LPCP1575J ➍
LPCP1575R ➍
Ceiling — Five Hubs, Four Close-Up Plugs 100 150 175 ‡ 200 ‡
1
LPCP1510 ➍
LPCP1510J ➍
LPCP1510R ➍
3/4
LPCP1775 ➍
LPCP1775J ➍
LPCP1775R ➍
1
LPCP1710 ➍
LPCP1710J ➍
LPCP1710R ➍
3/4
LPCP2075 ➍
LPCP2075J ➍
LPCP2075R ➍
1
LPCP2010 ➍
LPCP2010J ➍
LPCP2010R ➍
Wall — Five Hubs, Four Close-Up Plugs 100 150 175 ‡ 200 ‡
3/4
LPWBH1075 ➍
LPWBH1075J ➍
LPWBH1075R ➍
1
LPWBH1010 ➍
LPWBH1010J ➍
LPWBH1010R ➍
3/4
LPWBP1575 ➍
LPWBP1575J ➍
LPWBP1575R ➍
1
LPWBP1510 ➍
LPWBP1510J ➍
LPWBP1510R ➍
3/4
LPWBP1775 ➍
LPWBP1775J ➍
LPWBP1775R ➍
1
LPWBP1710 ➍
LPWBP1710J ➍
LPWBP1710R ➍
3/4
LPWBP2075 ➍
LPWBP2075J ➍
LPWBP2075R ➍
1
LPWBP2010 ➍
LPWBP2010J ➍
LPWBP2010R ➍
25° Stanchion — One Hub 100 150 175 ‡ 200 ‡
1-1/4
LPSH10125 ➍
LPSH10125J ➍
LPSH10125R ➍
1-1/2
LPSH10150➍
LPSH10150J ➍
LPSH10150R ➍
1-1/4
LPSP15125 ➍
LPSP15125J ➍
LPSP15125R ➍
1-1/2
LPSP15150 ➍
LPSP15150J ➍
LPSP15150R ➍
1-1/4
LPSP17125 ➍
LPSP17125J ➍
LPSP17125R ➍
1-1/2
LPSP17150 ➍
LPSP17150J ➍
LPSP17150R ➍
1-1/4
LPSP20125 ➍
LPSP20125J ➍
LPSP20125R ➍
1-1/2
LPSP20150 ➍
LPSP20150J ➍
LPSP20150R ➍
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ To order fixture with guard, add suffix -G (before adding voltage suffix). ➋ Furnished with 8” NEMA V refractor — to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). ➌ Add voltage suffix -MT for 120, 208, 240 or 277 V. ➍ Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V.
1010
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © November 2011
Mercmaster™ II HID Luminaires Mounting Hoods and Ballast Bodies High Pressure Sodium and Pulse Start Metal Halide. Mogul Base Hoods and Ballast Housings are Copperfree Aluminum (4/10 of 1%). Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Mounting Hoods Description
Hub Size (Inches)
Catalog Number
Pendant Lighting
3/4
LPA-75
1
LPA-100
3/4
LPC-75
1
LPC-100
3/4
LPWB-75
1
LPWB-100
One Hub, Rigid or Flexible Mounting Ceiling
Wall
Five Hubs, Four Close-Up Plugs
25° Stanchion 1-1/4
LPS-125
1-1/2
LPS-150
One Hub Mounting Adapter Permits use of Mercmaster II pendant hood on existing V-51 and Mercmaster I mounting hoods. Remove Mercmaster I ballast body from existing mounting hood, thread in adapter and attach wire to Mercmaster II.
LPAD-1
Mercmaster II Ballast Bodies
Type
Ballast Body Catalog Numbers Globe/12” 8” Refractor Refractor
120V
208V
240V
277V
480V
50
LPB50L
LPBLH50R
-MT
-MT
-MT
-MT
—
Lamp Watts
Add Voltage Suffixes ➊
High Pressure Sodium High Power Factor (Min. P.F. 90%)
70
LPB70L
LPBLH70R
-MT
-MT
-MT
-MT
-480
100
LPB100L
LPBLH100R
-MT
-MT
-MT
-MT
-480
150
LPB150L
LPBLH150R
-MT
-MT
-MT
-MT
-480
100
LPB100H
LPBH100R
150
LPB150P
LPBP150R
-MT
-MT
-MT
-MT
-480
175
LPB175P
LPBP175R
-MT
-MT
-MT
-MT
-480
200
LPB200P
LPBP200R
-MT
-MT
-MT
-MT
-480
Pulse Start Metal Halide
Constant Wattage (Min. P.F. 90%)
-MTMED -MTMED -MTMED -MTMED -480MED
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ MT (multi-volt) ballasts can be operated at an input voltage of either 120, 208, 240 or 277 V. 480 ballasts can be operated at input voltage of 480 V. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1011
Lighting: Enclosed and Gasketed — Area — HID
Five Hubs, Four Close-Up Plugs
Mercmaster™ II HID Luminaire Accessories
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base
Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body.
Description
Catalog Number
Lighting: Enclosed and Gasketed — Area — HID
Lighting
Prismatic Glass Globes Clear Heat-Resistant
VPGL-2HR
Amber
VPGL-2AM
Blue
VPGL-2BL
Green
VPGL-2GR
Red
VPGL-2RE
Coated Prismatic Tuff-Skin® Glass Globes For use in areas where fixture is subject to extreme thermal shock
Clear Heat-Resistant
VPGL-2HRT
Polycarbonate Globes – Impact-Resistant ➊
Use 100W Lamp max.; do not use in ambients exceeding 77 °F/25 °C
Light Distribution
IES/NECA Distribution Curves
Clear
VPGL-2PL
Amber
VPGL-2AMPL
Green
VPGL-2GRPL
Red
VPGL-2REPL
8” Glass (50-200 W ➊)
12” Glass (50-200 W ➊)
12” Polycarbonate (50-175 W ➋)
NEMA I
LPG-R1
—
—
NEMA II
—
LPRF-2CG
LPRF-2CP
NEMA III
LPG-R3
—
LPRF-3CP
NEMA IV
—
—
LPRF-4CP
NEMA V
LPG-R5
LPRF-5CG
LPRF-5CP
Closed Prismatic Refractors — 50 W-200 W ➊
8” Refractor
12” Refractor
➊ Polycarbonate globes are shatter-resistant – for use in processing plants, canneries, dairies, bakeries or anywhere broken glass would prove a hazard. Ideally suited for areas where vandalism, high replacement and high maintenance costs are a problem. Do not use in ambients exceeding 77 °F/25 °C. For burning in vertical base-up positions only. Registered trademark of Thomas Manufacturing Corporation, Parkton, Md. It is recommended that guards be used with these globes. ➊ 150 W max. for HPS. ➋ 100 W max. for MH.
1012
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Accessories and Weights High Pressure Sodium and Pulse Start Metal Halide. Mogul Base
Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body.
Description
Catalog Number
Guard KGU2
Guard for Glass Globe
Lighting
Steel Guards for 8” and 12” Refractors LPRG2
Guard for 12” Refractor
LPBG12
3 machine screws furnished LPRG-2
LPBG-12
Polyester Reflectors
Standard Dome
Standard Dome
KR2-ST
30° Angle
KR2-AN
30° Angle
Replacement Gaskets — Silicone Rubber Globe and 12” Refractor Gasket
VPGL-GK
8” Refractor Gasket
KRF-GK
Photocell (Hazardous) 120 Volt
PC120D2
208 thru 277 Volt
PC247D2
Mounting Hood Weights Type
Weight (Lbs/Kg)
Type
Weight (Lbs/Kg)
Pendant
3/1.4
Wall
5/2.3
Ceiling
5/2.3
Stanchion
4/1.8
Reflectors and Refractors — Weight includes globe and guard
Watts
HPS
50, 70
14
—
100
15
15
150
16
175
—
200
PSMH
Catalog Wt. Lbs/Kg Number Standard Dome Reflector
Catalog Wt. Lbs/Kg Number 30° Angle Reflector
LPG-R1
13/5.9
—
5.25/2.4
LPG-R3
13/5.9
16
5.25/2.4
LPG-R5
13/5.9
2.5/1.1
KR2-AN
Catalog Wt. Lbs/Kg Number 12” Refractor
5.25/2.4
2.5/1.1
KR2-ST
Catalog Wt. Lbs/Kg Number 8” Refractor
LPRF-5CG
18
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
1013
Lighting: Enclosed and Gasketed — Area — HID
Guard for 8” Refractor
Mercmaster™ II HID Luminaire Electrical Specifications and Fuse Kits High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water)
Fuse Kit
Lighting: Enclosed and Gasketed — Area — HID
Lighting
Electrical Specifications Line Type of Starting Voltage Ballast Amps 50 Watt High Pressure Sodium 120 HX-HPF 0.58 208 HX-HPF 0.35 240 HX-HPF 0.31 277 HX-HPF 0.25 70 Watt High Pressure Sodium 120 HX-HPF 0.90 208 HX-HPF 0.50 240 HX-HPF 0.44 277 HX-HPF 0.35 480 HX-HPF 0.21 100 Watt High Pressure Sodium 120 HX-HPF 1.30 208 HX-HPF 0.76 240 HX-HPF 0.66 277 HX-HPF 0.60 480 HX-HPF 0.33 150 Watt High Pressure Sodium 120 HX-HPF 2.00 208 HX-HPF 1.15 240 HX-HPF 1.00 277 HX-HPF 0.85 480 HX-HPF 0.50 100 Watt Pulse Start Metal Halide 120 HX-HPF 1.20 208 HX-HPF 0.70 240 HX-HPF 0.61 277 HX-HPF 0.55 480 HX-HPF 0.30 150 Watt Pulse Start Metal Halide 120 HX-HPF 1.75 208 HX-HPF 1.30 240 HX-HPF 0.85 277 HX-HPF 0.77 480 C.W.A. 0.45 175 Watt Pulse Start Metal Halide 120 C.W.A. 0.90 208 C.W.A. 0.50 240 C.W.A. 0.35 277 C.W.A. 0.30 480 C.W.A. 0.25 200 Watt Pulse Start Metal Halide 120 C.W.A. 2.10 208 C.W.A. 1.15 240 C.W.A. 1.10 277 C.W.A. .75 480 C.W.A. .58
Operating Amps
Total Watts
0.58 0.33 0.29 0.25
64 64 64 64
0.82 0.48 0.41 0.36 0.21
94 94 94 94 94
1.15 0.67 0.60 0.52 0.31
130 130 130 130 135
1.70 0.95 0.85 0.72 0.47
188 188 188 188 189
1.15 0.70 0.58 0.50 0.35
130 130 130 130 140
1.60 1.00 0.80 0.70 0.42
188 188 188 188 185
1.78 1.08 0.89 0.76 0.50
199 199 199 199 213
2.00 1.25 1.00 .85 .50
238 238 238 238 237
Order fuses as a separate item by catalog number from right columns.
Lamp Watts 50
70
100
150
175
200
Volts 120 208 240 277 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480
Fuse Quantity Required 1 2 2 1 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2
Fuse Kit Catalog Number HPS PSMH F5 — F3 — F3 — F2 — F5 — F3 — F3 — F2 — F2 — F8 F6 F5 F4 F5 F3 F3 F3 F3 F2 F10 F10 F5 F5 F5 F5 F5 F4 F3 F3 — F5 — F3 — F3 — F2 — F2 — F9 — F6 — F5 — F4 — F2
Fuses are filled with non-combustible granular material. Fuse Kit includes fuse, fuse block, wire, mounting screws and connectors. All mounting hoods have provisions for easy field installation of fuses in fixtures.
† For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures.
1014
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Dimensions
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit.
Lighting
25° Angle Stanchion Mount
Ceiling Mount
Wall Mount
Fixture with 8” Refractor
Fixture with Guard and Polyester Reflector
Fixture with 12” Refractor
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Lighting: Enclosed and Gasketed — Area — HID
Pendant Mount
1015
Mercmaster™ II HID Luminaire Photometric Data 150 W HPS
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen).
Total Luminaire Efficiency = 86.1% CIE Type - Semi-Direct
Lighting
Plane
Spacing Criteria
0-180
2.82
90-270
2.82
Diagonal
2.82
For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp – 0.594; for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95.
REPORT NUMBER: LP15LGG 150 W High Pressure Sodium fixture with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc
Lighting: Enclosed and Gasketed — Area — HID
% Walls Rw Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110
0 1 2 3 4 5 6 7 8 9 10
Lumens 50.74 164.55 310.47 611.05 961.13 1308.18 1542.35 1716.10 1799.18 1802.19 1676.86
80
70
441.46 9.61 3.33 0.74 0.00 0.00
Total Luminaire Efficiency = 73.6% CIE Type - Direct Plane
Spacing Criteria
0-180
1.46
90-270
1.46
Diagonal
1.68 Lumens 266.98 799.41 1337.05 1732.06 2067.60 2317.60 2210.81 866.77 145.09 14.46 8.75 7.93
120-130 130-140 140-150 150-160 160-170 170-180
4.51 2.16 0.48 0.00 0.00 0.00
1016
10
0
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
95 81 71 64 57 52 48 44 40 38 35
95 74 62 52 45 40 35 31 28 25 23
95 69 54 44 36 31 26 23 20 18 16
95 64 47 37 30 24 20 17 15 13 11
89 75 65 58 53 48 44 40 37 35 32
89 69 57 48 42 37 32 29 26 24 22
89 64 50 41 34 29 25 21 19 17 15
89 59 44 34 28 23 19 16 14 12 11
77 59 49 41 35 31 27 24 22 20 18
77 55 43 35 29 24 21 18 16 14 13
77 51 38 30 24 19 16 14 12 10 9
67 50 41 34 29 26 23 20 18 17 15
67 47 36 29 24 20 17 15 13 12 11
67 44 32 25 20 16 13 11 10 8 7
57 42 33 28 24 21 18 16 15 14 13
57 39 30 24 19 16 14 12 11 10 9
57 37 27 20 16 13 11 9 8 7 6
53 33 23 17 13 10 8 7 6 5 4
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 525.75 1136.81 3406.12 8463.75
% Lamp 3.3 7.1 21.3 52.9
% Fixture 3.8 8.3 24.7 61.4
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 4858.16 5299.62 5312.56 5313.30 13777.05
% Lamp 30.4 33.1 33.2 33.2 86.1
% Fixture 35.3 38.5 38.5 38.6 100.0
REPORT NUMBER: LP15LST 150 W High Pressure Sodium fixture with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
30
50
110-120 1379.11 120-130 130-140 140-150 150-160 160-170 170-180
50
70
0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
88 79 71 64 58 53 49 45 42 39 36
88 76 65 56 49 43 38 34 31 28 26
88 72 59 49 42 36 31 27 24 22 20
88 69 55 44 36 31 26 23 20 18 16
86 77 69 62 57 52 47 44 40 38 35
86 74 63 55 48 42 38 34 31 28 26
86 71 58 49 41 35 31 27 24 22 20
86 68 54 44 36 30 26 23 20 18 16
82 71 61 52 46 40 36 33 30 27 25
82 68 57 47 40 35 30 27 24 21 19
82 66 53 43 36 30 26 22 20 17 16
78 68 58 50 44 39 35 31 29 26 24
78 66 55 46 39 34 30 26 23 21 19
78 64 52 42 35 30 25 22 19 17 16
75 65 56 48 42 38 34 30 28 25 23
75 64 53 45 38 33 29 26 23 21 19
75 62 50 41 35 29 25 22 19 17 15
73 60 49 40 33 28 24 20 18 16 14
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 2403.44 4135.50 8520.70 11743.37
% Lamp 15.0 25.8 53.3 73.4
% Fixture 20.4 35.1 72.3 99.7
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 31.14 35.65 38.29 38.29 11781.65
% Lamp 0.2 0.2 0.2 0.3 73.6
% Fixture 0.3 0.3 0.3 0.3 100.0
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Photometric Data 150 W HPS
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen).
Total Luminaire Efficiency = 73.1% CIE Type - Direct Plane
Spacing Criteria 2.06
90-270
1.58
Diagonal
1.62
REPORT NUMBER: LP15LAN 150 W High Pressure Sodium fixture with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw
Lumens 222.62 664.60 1084.32 1536.55 1771.90 1771.51 1668.93 1422.36 994.54 432.23 104.58 20.99
120-130 130-140 140-150 150-160 160-170 170-180
1.21 0.04 0.00 0.00 0.00 0.00
Total Luminaire Efficiency = 81.1% CIE Type - Semi-Direct Plane
Spacing Criteria
0-180
1.98
90-270
1.98
Diagonal
3.40
0 1 2 3 4 5 6 7 8 9 10
Lumens 72.83 222.26 380.73 621.11 852.53 1765.29 3192.58 2366.61 1230.65 450.14 712.41 499.15
120-130 130-140 140-150 150-160 160-170 170-180
323.44 185.00 81.31 21.08 2.81 0.00
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
86 76 68 61 55 50 46 43 40 37 35
86 71 60 52 45 40 36 32 29 26 24
86 67 54 45 38 33 28 25 22 20 18
86 63 49 39 32 27 23 20 18 16 14
84 73 65 59 53 49 45 41 38 36 33
84 69 58 50 44 39 35 31 28 26 24
84 65 53 44 37 32 28 25 22 20 18
84 62 48 39 32 27 23 20 17 16 14
79 65 55 48 42 37 33 30 27 25 23
79 62 50 42 36 31 27 24 21 19 17
79 59 46 37 31 26 22 19 17 15 14
75 62 52 45 39 35 31 28 26 24 22
75 59 48 40 34 30 26 23 21 19 17
75 57 45 36 30 25 22 19 17 15 13
71 58 49 43 37 33 30 27 25 23 21
71 56 46 39 33 29 25 22 20 18 16
71 54 43 35 29 25 21 19 16 15 13
70 52 41 33 27 23 20 17 15 13 12
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 1971.54 3508.09 7051.50 11137.33
% Lamp 12.3 21.9 44.1 69.6
% Fixture 16.9 30.0 60.3 95.2
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 557.80 559.01 559.04 559.04 11696.38
% Lamp 3.5 3.5 3.5 3.5 73.1
% Fixture 4.8 4.8 4.8 4.8 100.0
REPORT NUMBER: LP15LJ 150 W High Pressure Sodium fixture with 8” Prismatic Glass Reractor - NEMA Type V * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
80
0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
93 80 69 61 54 49 45 41 38 35 33
93 73 59 49 42 36 32 28 25 23 21
93 68 51 40 32 27 23 20 17 15 14
93 63 45 33 25 20 16 14 12 10 9
89 76 65 57 51 46 42 38 36 33 31
89 70 56 47 40 34 30 27 24 22 20
89 65 49 38 31 26 22 19 16 15 13
89 61 43 32 24 19 16 13 11 10 9
82 64 51 42 35 31 27 24 22 20 18
82 60 45 35 28 23 20 17 15 13 12
82 56 40 29 22 18 14 12 10 9 8
76 58 46 38 32 27 24 24 19 18 16
76 55 41 32 26 21 18 15 14 12 11
76 52 37 27 21 16 13 11 9 8 7
70 53 41 34 28 24 21 19 17 16 15
70 50 37 29 23 19 16 14 12 11 10
70 48 34 25 19 15 12 10 8 7 6
67 45 31 22 16 12 10 8 6 5 5
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Lumens 675.83 1296.93 3914.76 10704.60
% Lamp 4.2 8.1 24.5 66.9
% Fixture 5.2 10.0 30.2 82.5
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 1661.70 1985.14 2251.45 2275.34 12979.94
% Lamp 10.4 12.4 14.1 14.2 81.1
% Fixture 12.8 15.3 15.3 17.5 100.0
1017
Lighting: Enclosed and Gasketed — Area — HID
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Lighting
0-180
For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp – 0.594; for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95.
Mercmaster™ II HID Luminaire Photometric Data 175 W PSMH
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen).
Total Luminaire Efficiency = 75.4% CIE Type - General Diffuse
Lighting
Plane
Spacing Criteria
0-180
n/a
90-270
n/a
Diagonal
n/a
For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp – 1.36; for 100 W (8,500 lumen) PSMH lamp – 0.49. For candlepower values of fixture with guard, multiply by 0.95.
REPORT NUMBER: LP17PGG 175 W Pulse Start Metal Halide fixture with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc
Lighting: Enclosed and Gasketed — Area — HID
% Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110
Lumens 42.67 151.27 305.99 587.79 880.58 1114.51 1306.71 1568.03 1720.24 1797.50 1750.20
110-120
1559.14
120-130 130-140 140-150 150-160 160-170 170-180
391.09 7.81 3.19 0.61 0.18 0.00
Total Luminaire Efficiency = 63.8% CIE Type - Direct Plane
Spacing Criteria
0-180
1.50
90-270
1.50
Diagonal
1.66
0 1 2 3 4 5 6 7 8 9 10
Lumens 271.72 817.50 1392.53 1749.97 2044.83 2121.25 1862.42 720.46 141.89 14.66 8.28 9.57
120-130 130-140 140-150 150-160 160-170 170-180
5.69 3.14 2.17 1.71 1.70 0.36
1018
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
82 70 62 55 50 46 42 38 35 33 31
82 65 54 46 40 35 31 27 25 22 20
82 60 47 38 32 27 23 20 18 16 14
82 55 42 33 26 22 18 15 13 12 10
77 65 57 51 46 42 38 35 32 30 28
77 60 50 42 37 32 28 25 23 21 19
77 56 44 36 30 25 22 19 17 15 13
77 52 39 30 24 20 17 14 12 11 9
66 51 42 35 31 27 24 21 19 17 16
66 47 37 30 25 21 18 16 14 13 11
66 44 33 26 21 17 14 12 10 9 8
57 42 35 29 25 22 20 18 16 14 13
57 40 31 25 21 17 15 13 12 10 9
57 37 28 21 17 14 12 10 9 7 7
48 35 28 23 20 17 15 14 13 12 11
48 33 25 20 16 14 12 10 9 8 7
48 31 22 17 13 11 9 8 7 6 5
44 27 19 14 11 8 7 6 5 4 3
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 499.93 1087.72 3082.80 7677.78
% Lamp 2.9 6.2 17.6 43.9
% Fixture 3.8 8.2 23.4 58.2
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 5106.84 5497.93 5508.93 5509.71 13187.48.
% Lamp 29.2 31.4 31.5 31.5 75.4
% Fixture 38.7 41.7 41.7 41.8 100.0
REPORT NUMBER: LP17PST 175 W Pulse Start Metal Halide fixture with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Rw
80
Rw 0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
76 69 62 56 51 47 43 40 37 34 32
76 66 57 49 43 38 34 31 28 25 23
76 63 52 44 37 32 28 25 22 20 18
76 61 48 39 33 28 24 21 18 16 15
74 67 61 55 50 45 42 39 36 33 31
74 65 56 48 42 37 33 30 27 25 23
74 62 51 43 37 32 28 25 22 20 18
74 60 48 39 33 28 24 21 18 16 15
71 62 53 46 41 36 32 29 26 24 22
71 60 50 42 36 31 27 24 22 19 18
71 58 47 38 32 27 23 20 18 16 14
68 59 51 45 39 35 31 28 26 23 22
68 57 48 41 35 30 27 24 21 19 17
68 56 46 38 32 27 23 20 18 16 14
65 57 49 43 38 33 30 27 25 23 21
65 55 47 40 34 30 26 23 21 19 17
65 54 45 37 31 27 23 20 18 16 14
64 53 43 35 30 25 22 19 16 15 13
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 2481.75 4231.72 8397.80 11122.57
% Lamp 14.2 24.2 48.0 63.6
% Fixture 22.2 37.9 75.2 99.6
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 32.51 38.20 43.51 47.28 11169.85
% Lamp 0.2 0.2 0.2 0.3 63.8
% Fixture 0.3 0.3 0.3 0.4 100.0
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Mercmaster™ II HID Luminaire Photometric Data 175 W PSMH
UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen).
Total Luminaire Efficiency = 61.6% CIE Type - Direct Plane
Spacing Criteria 2.02
90-270
1.62
Diagonal
1.58
REPORT NUMBER: LP17PAN 175 W Pulse Start Metal Halide fixture with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls
Lumens 221.01 674.48 1111.79 1519.14 1697.13 1644.77 1457.83 1248.84 814.94 280.33 87.54 16.66
120-130 130-140 140-150 150-160 160-170 170-180
1.25 0.06 0.06 0.00 0.00 0.00
Total Luminaire Efficiency = 73.9% CIE Type - Semi-Direct Plane
Spacing Criteria
0-180
2.08
90-270
2.08
Diagonal
3.78
0 1 2 3 4 5 6 7 8 9 10
Lumens 58.60 179.87 316.74 543.99 726.99 1445.41 3661.34 2432.42 1351.63 477.79 717.26 474.07
120-130 130-140 140-150 150-160 160-170 170-180
293.44 163.08 70.40 18.48 2.58 0.00
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
73 64 58 52 47 43 40 37 34 32 30
73 61 52 45 39 34 31 28 25 23 21
73 57 46 39 33 28 25 22 20 18 16
73 54 42 34 28 24 20 18 16 14 13
71 62 56 50 46 42 38 35 33 31 29
71 59 50 43 38 34 30 27 25 23 21
71 56 45 38 32 28 24 22 19 17 16
71 53 42 34 28 24 20 18 16 14 12
67 56 47 41 36 32 29 26 24 22 20
67 53 44 36 31 27 24 21 19 17 15
67 51 40 33 27 23 20 17 15 14 12
64 53 45 39 34 30 27 25 23 21 19
64 51 42 35 30 26 23 20 18 17 15
64 49 39 32 27 23 20 17 15 13 12
61 50 43 37 33 29 26 24 22 20 18
61 49 40 34 29 25 22 20 18 16 15
61 47 38 31 26 22 19 17 15 13 12
59 45 36 29 24 21 18 15 14 12 11
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Lumens 2007.28 3526.41 6868.32 10389.94
% Lamp 11.5 20.2 39.2 59.4
% Fixture 18.6 32.7 63.7 96.4
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 384.53 385.77 385.89 385.89 10775.83
% Lamp 2.2 2.2 2.2 2.2 61.6
% Fixture 3.6 3.6 3.6 3.6 100.0
REPORT NUMBER: LP17PJ 175 W Pulse Start Metal Halide fixture with Globe and 8” Prismatic Glass Reractor - NEMA Type V * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Rw
80
Rw 0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
0
70
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
85 72 62 55 49 44 40 37 34 31 29
85 66 53 44 37 32 28 25 22 20 18
85 61 46 35 28 23 20 17 15 13 12
85 56 39 29 22 17 14 12 10 8 7
82 68 59 51 46 41 37 34 32 30 28
82 63 51 41 35 30 26 23 21 19 18
82 58 44 34 27 22 19 16 14 13 11
82 54 38 28 21 16 13 11 9 8 7
75 57 46 37 31 27 24 21 19 17 16
75 54 40 31 24 20 17 15 13 11 10
75 50 35 25 19 15 12 10 8 7 6
69 52 41 33 28 24 21 19 17 16 14
69 49 36 28 22 18 15 13 12 10 9
69 46 32 23 17 14 11 9 8 7 6
64 47 37 30 25 21 19 17 15 14 13
64 45 33 25 20 16 14 12 10 9 8
64 43 30 21 16 12 10 8 7 6 5
61 40 27 19 13 10 8 6 5 4 4
Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Lumens 555.22 1099.21 3271.60 10717.00
% Lamp 3.2 6.3 18.7 61.2
% Fixture 4.3 8.5 25.3 82.9
Zone 90-120 90-130 90-150 90-180 0-180
Lumens 1669.13 1962.57 2196.06 2217.10 12934.11
% Lamp 9.5 11.2 12.5 12.7 73.9
% Fixture 12.9 15.2 15.2 17.1 100.0
1019
Lighting: Enclosed and Gasketed — Area — HID
Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120
Lighting
0-180
For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp – 1.36; for 100 W (8,500 lumen) PSMH lamp – 0.49. For candlepower values of fixture with guard, multiply by 0.95.
Mercmaster™ II HID Luminaire Isofootcandle Data
High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit.
Lighting
HPS Lamp Wattage
Horizontal Distance from Mounting Point (Ft/M)
Mounting Height (Ft/M)
0/0 5/1.5 10/3.0 15/4.6 Mercmaster II, High Pressure Sodium, No Reflector, No Guard 70 Watt – 5,800 Lumen 100 Watt – 9,500 Lumen 150 Watt – 16,000 Lumen
20/6.1
25/7.6
30/9.1
35/10.7
40/12.2
45/13.7
50/15.2
Lighting: Enclosed and Gasketed — Area — HID
Footcandle Chart (Initial Horiz. FTC)
70
100
150
8/2.4
.60
2.70
1.50
.73
.38
.21
.13
.08
.06
.04
.03
10/3.0
.39
1.70
1.30
.72
.40
.24
.15
.10
.07
.05
.04
12/3.7
.27
1.10
1.10
.68
.41
.26
.17
.11
.08
.06
.04
15/4.6
.17
.66
.81
.60
.39
.26
.18
.13
.09
.07
.05
20/6.1
.10
.37
.43
.40
.33
.25
.18
.13
.10
.08
.06
8/2.4
1.00
4.80
2.70
1.20
.62
.35
.21
.14
.10
.07
.05
10/3.0
.64
2.80
2.20
1.30
.67
.40
.25
.16
.11
.08
.06
12/3.7
.44
1.80
1.80
1.30
.71
.42
.28
.18
.13
.09
.07
15/4.6
.28
1.10
1.30
.97
.70
.45
.30
.21
.15
.11
.08
20/6.1
.16
.59
.69
.70
.55
.42
.32
.23
.17
.13
.10
8/2.4
2.50
8.30
4.60
2.20
1.10
.62
.38
.25
.17
.12
.09
10/3.0
1.60
5.40
4.00
2.20
1.20
.71
.44
.29
.20
.14
.11
12/3.7
1.10
4.20
3.30
2.00
1.20
.76
.49
.33
.23
.17
.12
15/4.6
.72
2.10
2.40
1.80
1.20
.79
.54
.38
.27
.20
.15
20/6.1
.40
1.10
1.30
1.30
1.00
.73
.54
.40
.30
.23
.18
Mercmaster II, High Pressure Sodium, With Reflector, No Guard 70 Watt – 5,800 Lumen 100 Watt – 9,500 Lumen 150 Watt – 16,000 Lumen Footcandle Chart (Initial Horiz. FTC)
70
100
150
1020
8/2.4
14.80
10.00
3.80
1.50
.55
.15
.05
.03
.02
.01
.01
10/3.0
9.50
7.70
3.70
1.60
.74
.32
.12
.05
.03
.02
.01
12/3.7
6.60
6.60
3.30
1.50
.87
.46
.18
.10
.05
.02
.02
15/4.6
4.20
4.20
2.70
1.70
.94
.56
.33
.18
.10
.06
.03
20/6.1
2.40
2.50
1.90
1.30
.92
.62
.41
.28
.18
.12
.08
8/2.4
21.90
16.80
6.30
2.40
.86
.28
.08
.05
.03
.02
.01
10/3.0
14.00
12.40
6.00
2.70
1.20
.53
.19
.07
.04
.03
.02
12/3.7
9.70
9.40
5.50
2.80
1.40
.73
.36
.20
.13
.04
.03
15/4.6
6.20
6.70
4.40
2.70
1.60
.90
.53
.33
.19
.11
.05
20/6.1
3.50
4.30
3.10
2.20
1.50
1.0
.68
.44
.30
.21
.13
8/2.4
36.90
27.80
10.50
3.80
1.30
.35
.14
.08
.04
.03
.02
10/3.0
23.60
20.80
10.10
4.40
2.00
.78
.29
.11
.07
.04
.03
12/3.7
16.40
15.80
9.20
4.60
2.20
1.20
.54
.30
.16
.06
.04
15/4.6
10.50
11.60
7.50
4.50
2.60
1.50
.86
.42
.26
.16
.08
20/6.1
5.90
7.20
5.20
3.70
2.50
1.70
1.10
.73
.50
.32
.19
Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
