Mini-Com TX6 PLUS and TX5e Shielded Jack Modules
Mini-Com TX6 PLUS and TX5e Shielded Jack Modules Part Numbers: CJS688TGY, CJSK688TG**, CJSQ688TG**, CJS5E88TGY, CJSK5E88TG**
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
PN399G
S/FTP Individual Foil Pair Screen
2.00" (50.8mm)
CWST
Conductors 0.50" (12.7mm)
Braid
SF/UTP Overall Foil Screen
2.00" (50.8mm)
CWST
Conductors
Strain Relief Collar
0.50" (12.7mm)
Braid
F/UTP
Drain Wire
Overall Foil Screen
Wire Cap White - TX6 PLUS Red - TX5e
2.00" (50.8mm) CWST
Conductors
0.50" (12.7mm)
Jack Drain Wire
2
1
4
3
2
Trim pair separator and/or ripcord if present.
5
6 EGJT
Do not pre-arrange conductors.
(OR)
* Denotes color.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
Drain Wire
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
7
7
T568B Wiring
PN399G
T568A Wiring
1. R
R
F
F
(OR)
1.
2.
1.
2.
(OR) 1.
2.
R
R
F
F
8
10
9
See note 5
U/FTP
Drain wire
EGJT
CJSGK-X Kit
REMOVAL STEPS
2
1
3
Notes: 1. For specified performance, follow TIA/EIA 568-C installation guidelines. 2. Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 20 times. 4. For technical and performance information, consult Panduit Technical Support. 5. CJSGK-X Grounding Kit is REQUIRED for all Mini-Com Modular Patch Panels, but is optional for Mini-Com All Metal Shielded Modular Patch Panels. As with all Communication Components, the following statements apply: 1. Never install communications wiring during a lightning storm. 2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. 3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 4. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Phone: 866-405-6654
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
PN399G
S/FTP Individual Foil Pair Screen
2.00" (50.8mm)
CWST
Conductors 0.50" (12.7mm)
Braid
SF/UTP Overall Foil Screen
2.00" (50.8mm)
CWST
Conductors
Strain Relief Collar
0.50" (12.7mm)
Braid
F/UTP
Drain Wire
Overall Foil Screen
Wire Cap White - TX6 PLUS Red - TX5e
2.00" (50.8mm) CWST
Conductors
0.50" (12.7mm)
Jack Drain Wire
2
1
4
3
2
Trim pair separator and/or ripcord if present.
5
6 EGJT
Do not pre-arrange conductors.
(OR)
* Denotes color.
For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2
Drain Wire
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
7
7
T568B Wiring
PN399G
T568A Wiring
1. R
R
F
F
(OR)
1.
2.
1.
2.
(OR) 1.
2.
R
R
F
F
8
10
9
See note 5
U/FTP
Drain wire
EGJT
CJSGK-X Kit
REMOVAL STEPS
2
1
3
Notes: 1. For specified performance, follow TIA/EIA 568-C installation guidelines. 2. Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 20 times. 4. For technical and performance information, consult Panduit Technical Support. 5. CJSGK-X Grounding Kit is REQUIRED for all Mini-Com Modular Patch Panels, but is optional for Mini-Com All Metal Shielded Modular Patch Panels. As with all Communication Components, the following statements apply: 1. Never install communications wiring during a lightning storm. 2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. 3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 4. Use caution when installing or modifying communication wiring. E-mail: [email protected]
For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp
www.panduit.com Page 2 of 2
Phone: 866-405-6654
