Ossila OPV and OFET training
Ossila OPV and OFET training Following the success of our first OFET and OPV training courses we have now rolled out a continual program of training workshops so that you can sign up now and plan ahead.
Each workshop is run for small groups (maximum of four people per course) with two instructors will maximise the learning and practice opportunities. Dates for future workshops:
Month
Date
Type
December
17-18
OPV
January
28-29
OFET
February
25-26
OPV
March
25-26
OFET
April
29-30
OPV
May
27-28
OFET
June
24-25
OPV
Cost: £700 (excl. VAT) per person excluding travel and accommodation (lunch/dinner are provided for duration of course)
If you would like to take part in the next training session, would like to book in for one of the future training courses or would like further information about either of the course programmes, then please get in touch with one of our team at [email protected].
What our attendees are saying We're pleased to say that the first few Training Workshops have been going well and we've had some very positive feedback from our attendees: "Excellent team effort. Thanks James, Pier, Sophie, Lucy and everyone else." "The course was great, as well as the whole Ossila team and the other participants. The course had a good value for money ratio. I learned new things and refreshed some older memories." - Jannic Wolf Universität Konstanz. "The two days in Ossila were really full. I have learn a lot of new and put into order information I already have. I really appreciated personal experience from people who have done many solar cell samples and tried different things. I think this training saved me many days in lab, repeating mistakes someone else already did. I would come again." - Jana Honova - Brno University of Technology.
Ossila Ltd
I
I
www.ossila.com
I
[email protected]
I
+44 (0)114 213 2770
OPV Training Workshop The Ossila OPV training workshop is designed to give a practical overview of how to design, build and test polymer fullerene OPVs for a variety of research purposes. This two day course comprises of a day dedicated to making real devices in the clean rooms with a day spent beforehand learning about the theory and practicalities of device design/ fabrication as well as preparing and practising for the clean-room time. Participants will be introduced to the fabrication methods and equipment used for most of the common architectures used for research devices and will fabricate high performance inverted solar cells with the below architecture: ITO / PFN / PTB7:PC70BM / MoO3 / Al An overview of measurement techniques and equipment will be provided, followed by an opportunity for participants to apply what they’ve learnt to make their own devices and test the performance.
OFET Training Workshop The Ossila OFET training workshop is designed to give a practical overview of how to design, build and test OFETs in a number of different geometries for a variety of research purposes. This two day course comprises of a day dedicated to making real devices in the clean rooms with a day spent beforehand learning about the theory and practicalities of device design/ fabrication as well as preparing/practising for the clean-room time. Designed for people who want to use OFETs for a range of purposes including mobility screening for OLED/OPV research, sensing and general conjugated polymer physics. Participants will be introduced to the fabrication methods and equipment used for all four major types of OFET architecture (top/bottom gates and top/bottom contacts) and will fabricate devices based upon two different architectures. Devices will also be fabricated with both solution processed small molecules and polymers. An overview of measurement techniques and equipment will be provided, followed by an opportunity for participants to apply what they've learnt to make their own devices and test the performance.
Contact us to find out more: Call: 0114 213 2770 Ossila Ltd
I
I
Email: [email protected] www.ossila.com
I
[email protected]
I
+44 (0)114 213 2770
Each workshop is run for small groups (maximum of four people per course) with two instructors will maximise the learning and practice opportunities. Dates for future workshops:
Month
Date
Type
December
17-18
OPV
January
28-29
OFET
February
25-26
OPV
March
25-26
OFET
April
29-30
OPV
May
27-28
OFET
June
24-25
OPV
Cost: £700 (excl. VAT) per person excluding travel and accommodation (lunch/dinner are provided for duration of course)
If you would like to take part in the next training session, would like to book in for one of the future training courses or would like further information about either of the course programmes, then please get in touch with one of our team at [email protected].
What our attendees are saying We're pleased to say that the first few Training Workshops have been going well and we've had some very positive feedback from our attendees: "Excellent team effort. Thanks James, Pier, Sophie, Lucy and everyone else." "The course was great, as well as the whole Ossila team and the other participants. The course had a good value for money ratio. I learned new things and refreshed some older memories." - Jannic Wolf Universität Konstanz. "The two days in Ossila were really full. I have learn a lot of new and put into order information I already have. I really appreciated personal experience from people who have done many solar cell samples and tried different things. I think this training saved me many days in lab, repeating mistakes someone else already did. I would come again." - Jana Honova - Brno University of Technology.
Ossila Ltd
I
I
www.ossila.com
I
[email protected]
I
+44 (0)114 213 2770
OPV Training Workshop The Ossila OPV training workshop is designed to give a practical overview of how to design, build and test polymer fullerene OPVs for a variety of research purposes. This two day course comprises of a day dedicated to making real devices in the clean rooms with a day spent beforehand learning about the theory and practicalities of device design/ fabrication as well as preparing and practising for the clean-room time. Participants will be introduced to the fabrication methods and equipment used for most of the common architectures used for research devices and will fabricate high performance inverted solar cells with the below architecture: ITO / PFN / PTB7:PC70BM / MoO3 / Al An overview of measurement techniques and equipment will be provided, followed by an opportunity for participants to apply what they’ve learnt to make their own devices and test the performance.
OFET Training Workshop The Ossila OFET training workshop is designed to give a practical overview of how to design, build and test OFETs in a number of different geometries for a variety of research purposes. This two day course comprises of a day dedicated to making real devices in the clean rooms with a day spent beforehand learning about the theory and practicalities of device design/ fabrication as well as preparing/practising for the clean-room time. Designed for people who want to use OFETs for a range of purposes including mobility screening for OLED/OPV research, sensing and general conjugated polymer physics. Participants will be introduced to the fabrication methods and equipment used for all four major types of OFET architecture (top/bottom gates and top/bottom contacts) and will fabricate devices based upon two different architectures. Devices will also be fabricated with both solution processed small molecules and polymers. An overview of measurement techniques and equipment will be provided, followed by an opportunity for participants to apply what they've learnt to make their own devices and test the performance.
Contact us to find out more: Call: 0114 213 2770 Ossila Ltd
I
I
Email: [email protected] www.ossila.com
I
[email protected]
I
+44 (0)114 213 2770
