Looking for more info? Check out our Support and Training Center at www.FrightProps.com/FAQ
HAUNTED PHONE PROP
PRODUCT MANUAL
2
To access the SD you will have to remove 5 screws from the bottom of the phone.
CHANGING THE AUDIO:
This is the microSD Card that contains the audio files played by the phone. Remove it carefully and insert it into your PC to access and edit the audio files
When players pick up the phone they will hear a short tone. Once the correct code is entered, the phone will ring several times before a ghostly voice answers and laughs eerily. Once the audio track is played, the prop will cut its power output, disengaging the magnetic lock.
• With the power off, hold down the # button on the phone • While holding down the # button, turn on power to the phone • A voice will prompt you to enter your chosen code • Enter the desired numerical sequence • Press the # button again • You will hear a tone and the phone is now ready to operate
PROGRAMMING:
INSTRUCTIONS
The files are as follows: 001: Dial Tone - Make sure this is not too long, as players cannot enter numbers while this is playing 002: Ring 003: Audio That is Played When the Correct Number is Entered 004: Off the Hook Noise - Plays After Correct or Incorrect Audio Has Played 005: Password Set Notice 006: Set Password Success Notice 007: Audio That is Played when the Incorrect Number is Entered
3
This folder contains the MP3s the phone plays. To change them, simply open the folder and replace the MP#s with the ones of your choosing.
These are the MP3s pre-loaded onto the SD card. You can replace them with your own MP3s, just name your new MP3s 001.mp3, 002.mp3 and so on (you can delete the Asian characters from the file names if they are present). Make sure to delete the existing files you are replacing.