QS new series Motion Recording

How to set up Motion Recording for QS494, QS458, QS524, QS558, QS4816 DVRs Step 1. Select Start (on the Left Bottom Corner)

Step 2. Username. Enter your Password.

Step 3. Click on Log In.

Step 4. Select Basic

Step 5. Select Record

Step 6. Under Enable. Check all cameras you wish to record Motion.

Step 7. Under Mode. Select Schedule

Step 8. Select Schedule Tab

Step 9. Select Alarm (To record Motion)

Step 10. Select All (green box) to record motion on all channels

Step 11. Select Copy

Step 12. Select Apply

Step 13. Select Exit.

Step 14. Select OK (Successfully Saved!)

Step 15. Select Exit.

Step 16. Select Advance.

Step 17. Select Alarm.

Step 18. Select Motion Tab.

Step 19. Select the Sensitivity Level (1 Highest - 8 the Lowest Sensitive)

Step 20. Under Area. Select Settings (Adjust manually for each individual Channel.)

Step 21. Select the Area you wish to block motion. (When done, Right Click your mouse to Exit)

Step 22. Select Apply

Step 23. Select Exit

You have completed the Motion Recordng set up.