quarry naturals®
/ quarry naturals
q u a r ry T I L E
TILE SI Z ES Size 8 x 8 Field Tile 6 x 6 Field Tile 3-7/8 x 8 Field Tile
Shape 8" x 8" (20.3 cm x 20.3 cm)
6" x 6" (15.2 cm x 15.2 cm)
3-7/8" x 8" (9.8 cm x 20.3 cm)
t r i m Description
Size
Bullnose Q1665U
6 x 6 x 1/2
Bullnose Corner QCRL1665U
6 x 6 x 1/2
Bullnose Q1885U
8 x 8 x 1/2
Bullnose Corner QCRL1885U
8 x 8 x 1/2
Transition Q8485U
6 x 6 x 1/2
Shape
®
w e i g h t s & m e a s u r e s PCS / Carton
PCS / SF
SF / Carton
SF / Pallet
LBS / Unit
25
2.25
11.11
400
5.42
44
4
11.00
396
5.43
50
4.65
10.76
387.4
5.45
a va i l a b l e c o l o r s Field tile is available in the following colors: N01 N02 N03 N04 N46 N56
Lava Red (1) Fire Flash (1) Desert (1) Pairie Flash (1) Shadow Gray (2) Shadow Flash (2)
(1) & (2) notations indicate price group, (1) being the least expensive.
a p p l i c at i o n s RES
Cove Base In-Corner QB3565U H
PRO D UCT IN F ORMATION
LT HVY COM COM COM EXT
1 x 5 x 1/2
TILE THICKNESS: 1/2" Floors
RECOMMENDED GROUT JOINT: 3/8"
Walls/Backsplashes
RELATIVE PRICING: Lowest (1) to Highest (2)
Countertops Pool Linings Pool Decking
SHADE VARIATION: Medium (V2) (Flashed field tile)
Low (V1) (Solid field tile)
p e r f o r m a n c e c h a r a c t e r i s t i c s Dry
Moisture Absorption
Breaking Strength
MOH's
Chemical Resistance
NATURALS
C.O.F.
≥0.70
≥0.70
400 lbs.
7.0
Resistant
ABRASIVE Q
Wet
≥0.80
≥0.80
400 lbs.
7.0
Resistant
Q S PECIAL SURFACES: Abrasive grain available in N01, N03 and N46 in 6 x 6 and 8 x 8 sizes.
Abrasive grain particles added to Quarry Naturals give improved slip resistance for many types of footwear, depending on maintenance conditions. H Not available in Flash colors. QUARRY TILE MAINTENANCE: • For a satin finish, clean and buff using a heavy-duty, general-purpose cleaner. For best results, use cleaner before tile is put to use, as well as for continuing maintenance. • For immediate stain protection and shine, use a high-gloss surface finish. • For a natural look with long-term stain protection, use a water-based silicone sealer. IMPORTANT PRODUCT INFORMATION: When grouting with dark pigmented colors, a grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. e do not recommend light colored Quarry tile in commercial kitchens unless properly sealed. It is necessary to follow the proper W procedures and recommendations of grout and maintenance product manufacturers. NOTES: • Please specify abrasive grain when ordering. • Abrasive grain is acceptable for use on ramps. • Suitable for exterior patios (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed. • Suitable for industrial installations requiring high compressive strength. • Not for use on ramps, except when ordered with abrasive grain. • Please see Quarry Tile Maintenance on next page. • Complete trim line availability shown on next page. Abrasive grain not available on most trim shapes. • Use of a latex modified thin-set is recommended for installation. • All or select items within this series are made in the USA. For more information visit www.americanolean.com
For additional information on LEED certification points and RMC percentages, please visit www.americanolean.com/rmc
americanolean.com
q u a r ry T I L E
TILE SI Z ES Size 8 x 8 Field Tile 6 x 6 Field Tile 3-7/8 x 8 Field Tile
Shape 8" x 8" (20.3 cm x 20.3 cm)
6" x 6" (15.2 cm x 15.2 cm)
3-7/8" x 8" (9.8 cm x 20.3 cm)
t r i m Description
Size
Bullnose Q1665U
6 x 6 x 1/2
Bullnose Corner QCRL1665U
6 x 6 x 1/2
Bullnose Q1885U
8 x 8 x 1/2
Bullnose Corner QCRL1885U
8 x 8 x 1/2
Transition Q8485U
6 x 6 x 1/2
Shape
®
w e i g h t s & m e a s u r e s PCS / Carton
PCS / SF
SF / Carton
SF / Pallet
LBS / Unit
25
2.25
11.11
400
5.42
44
4
11.00
396
5.43
50
4.65
10.76
387.4
5.45
a va i l a b l e c o l o r s Field tile is available in the following colors: N01 N02 N03 N04 N46 N56
Lava Red (1) Fire Flash (1) Desert (1) Pairie Flash (1) Shadow Gray (2) Shadow Flash (2)
(1) & (2) notations indicate price group, (1) being the least expensive.
a p p l i c at i o n s RES
Cove Base In-Corner QB3565U H
PRO D UCT IN F ORMATION
LT HVY COM COM COM EXT
1 x 5 x 1/2
TILE THICKNESS: 1/2" Floors
RECOMMENDED GROUT JOINT: 3/8"
Walls/Backsplashes
RELATIVE PRICING: Lowest (1) to Highest (2)
Countertops Pool Linings Pool Decking
SHADE VARIATION: Medium (V2) (Flashed field tile)
Low (V1) (Solid field tile)
p e r f o r m a n c e c h a r a c t e r i s t i c s Dry
Moisture Absorption
Breaking Strength
MOH's
Chemical Resistance
NATURALS
C.O.F.
≥0.70
≥0.70
400 lbs.
7.0
Resistant
ABRASIVE Q
Wet
≥0.80
≥0.80
400 lbs.
7.0
Resistant
Q S PECIAL SURFACES: Abrasive grain available in N01, N03 and N46 in 6 x 6 and 8 x 8 sizes.
Abrasive grain particles added to Quarry Naturals give improved slip resistance for many types of footwear, depending on maintenance conditions. H Not available in Flash colors. QUARRY TILE MAINTENANCE: • For a satin finish, clean and buff using a heavy-duty, general-purpose cleaner. For best results, use cleaner before tile is put to use, as well as for continuing maintenance. • For immediate stain protection and shine, use a high-gloss surface finish. • For a natural look with long-term stain protection, use a water-based silicone sealer. IMPORTANT PRODUCT INFORMATION: When grouting with dark pigmented colors, a grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. e do not recommend light colored Quarry tile in commercial kitchens unless properly sealed. It is necessary to follow the proper W procedures and recommendations of grout and maintenance product manufacturers. NOTES: • Please specify abrasive grain when ordering. • Abrasive grain is acceptable for use on ramps. • Suitable for exterior patios (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed. • Suitable for industrial installations requiring high compressive strength. • Not for use on ramps, except when ordered with abrasive grain. • Please see Quarry Tile Maintenance on next page. • Complete trim line availability shown on next page. Abrasive grain not available on most trim shapes. • Use of a latex modified thin-set is recommended for installation. • All or select items within this series are made in the USA. For more information visit www.americanolean.com
For additional information on LEED certification points and RMC percentages, please visit www.americanolean.com/rmc
americanolean.com
