Quasar Microwave Replacing the Lightbulb

Quasar Microwave Replacing the Lightbulb

Quasar Microwave Replacing the Lightbulb How to replace a broken or burned out lightbulb in a Quasar microwave.

Written By: Melanie

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Quasar Microwave Replacing the Lightbulb

INTRODUCTION This guide explains how to replace the lightbulb in a Quasar microwave oven.

TOOLS:

PARTS:

Phillips #2 Screwdriver (1)

© iFixit — CC BY-NC-SA

New 40 Watt 130Volt Microwave Light Bulb (1)

www.iFixit.com

Page 2 of 5

Quasar Microwave Replacing the Lightbulb

Step 1 — Replacing the Light Bulb 

Locate the metal panel in the top left corner of the microwave. This covers the lightbulb compartment.

 Disconnect the Microwave from the power source.

Step 2 

© iFixit — CC BY-NC-SA

www.iFixit.com

Unscrew the screw holding the metal panel in place.

Page 3 of 5

Quasar Microwave Replacing the Lightbulb

Step 3



Open the metal panel.

Step 4



Unscrew the light bulb and replace it with a new light bulb.



Repeat Steps 2 and 3 in reverse order to complete the replacement.

To reassemble your device, follow Steps 2 and 3 in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Quasar Microwave Replacing the Lightbulb This document was last generated on 2017-07-06 10:29:37 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5