SD Card Door Replacement

Canon Powershot SX30 IS Battery/SD Card Door Replacement

Canon Powershot SX30 IS Battery/SD Card Door Replacement A Replacement guide for the Protective Hinge on the bottom of the camera.

Written By: Ellis DeVoe

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Canon Powershot SX30 IS Battery/SD Card Door Replacement

TOOLS: Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Canon Powershot SX30 IS Battery/SD Card Door Replacement

Step 1 — Battery/SD Card Door 

Open the protective door on the bottom of the camera, and remove the SD card and battery from the camera

Step 2



Unscrew the two 2mm screws from the inside of the case

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Canon Powershot SX30 IS Battery/SD Card Door Replacement

Step 3



Remove the plastic backing and the metal front plate from the spring controlled hinge



To replace, hold the plastic backing to the metal hinge and screw the plate onto the front of it

That's It! Good Job! This document was last generated on 2017-07-07 07:08:43 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4